DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
Figure 68. The page for creating a new Static IPv4 connection. The IPv4 section.
Parameter
IP address
Subnet mask
Gateway IP address
Primary DNS /
Secondary DNS
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
Vendor ID
Hostname
IPv4
For Static IPv4 type
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IPv4 type
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
A name of the router specified by your ISP. Optional.
Page 84 of 249
Configuring via Web-based Interface
Description