Table of Contents
Advertisement
1.4.2
Required Tools
In addition to a standard Engineer's tool kit, the following tools are required when
carrying out any work on the ST950 family of controllers.
User Interface
One of the following is required depending on the user interface chosen to be used
during the installation.
Description
Compatible browser + USB cable (A to B)
Compatible terminal emulator + USB cable (A to B)
Netbook kit + USB cable (A to B)
Serial handset Techterm + RS232 cable
Old Oyster handset + RS232 cable
Larger Screened Oyster handset + RS232 cable
Cabinet Access
One or more of the following will be required to gain access to the controller
cabinet.
Description
T-bar key
S-18 key – Main Cabinet *
Manual Panel key Type 900
* - In some areas customers specified keys may be used
1.4.3
Spares
See the appendix for a full list of spares that are necessary when carrying out a site
visit to the controller, whether for installation, commissioning or maintenance.
1.5
Definitions
Item
Bit
Byte
Configuration data
(aka Customer
Data) and site
specification
Security classification
Unrestricted
Version
7
Last Editor
manpreet.jeerh
Document Name
ST950 ICM Handbook
Copyright © Siemens plc 2020. All Rights Reserved.
All manuals and user guides at all-guides.com
Definition
Binary digit (i.e. `0' or `1')
Eight bit data array (i.e. bits 0-7, and 8-15 are bytes)
Data supplied by the customer as to how the controller is to
function. It is recommended that the Controller Forms
Handbook be used as the blank form for this.
Mobility is a division of Siemens Plc
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Part Number
667/1/32380/000
667/4/13296/001
667/4/13296/000
667/4/13296/002
Part Number
667/2/20234/000
4/MC 289
667/4/13651/000
Page
13 of 154
Status
Issued
Date
January 2020
Document No.
667/HE/45950/000
Advertisement
Table of Contents
