Related Manuals for Makita HS7610
Summary of Contents for Makita HS7610
- Page 1 INSTRUCTION MANUAL Circular Saw HS7010 / HS7610 DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: HS7010 HS7610 Blade diameter 185 - 190 mm Max. Cutting depth at 0° 65 - 67 mm 63 - 65 mm at 45° bevel 44 - 45 mm No load speed 5,500 min Overall length 300 mm 311 mm Net weight 4.0 kg... -
Page 3: Circular Saw Safety Warnings
Power tools can produce electromagnetic fields It is an employer's responsibility to enforce (EMF) that are not harmful to the user. However, the use of appropriate safety protective equip- users of pacemakers and other similar medical ments by the tool operators and by other per- devices should contact the maker of their device and/ sons in the immediate working area. - Page 4 Adjust the cutting depth to the thickness of When blade is binding, or when interrupting a the workpiece. Less than a full tooth of the blade cut for any reason, release the trigger and hold teeth should be visible below the workpiece. the saw motionless in the material until the blade comes to a complete stop.
- Page 5 Never force the saw. Push the saw forward at a Before setting the tool down after completing a speed so that the blade cuts without slowing. cut, be sure that the guard has closed and the Forcing the saw can cause uneven cuts, loss of blade has come to a complete stop.
-
Page 6: Functional Description
WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION CAUTION:... -
Page 7: Switch Action
CAUTION: Use only the Makita wrench to install or remove the circular saw blade. To remove the circular saw blade, press the shaft lock fully so that the circular saw blade cannot revolve and use the hex wrench to loosen the hex bolt counter- clockwise. - Page 8 For tool with the ring ► 1 . Lever Remove the blade and ring (country specific). For tool without the ring ► 1 . Hex bolt 2. Outer flange 3. Circular saw blade 4. Ring 5. Inner flange To install the circular saw blade, follow the removal procedure in reverse. For tool with the inner flange for other than 15.88 mm hole-diameter saw blade The inner flange has a certain diameter protrusion on one side of it and a different diameter protrusion on the other side.
- Page 9 ► 1 . Mounting shaft 2. Inner flange 3. Circular saw blade 4. Outer flange 5. Hex bolt When you wish to perform clean cutting operation, connect a Makita vacuum cleaner to your tool using the dust nozzle. For tool with the ring If your circular saw has a long lever (country specific), replace it with the short lever supplied with the dust nozzle.
-
Page 10: Operation
Adjusting the parallelism If both hands are holding saw, they cannot be cut by the circular saw blade. Set the base on the workpiece For HS7610 to be cut without the circular saw blade making any This adjustment has been made at the factory. But if it is contact. Then turn the tool on and wait until the circular off, you can adjust it as the following procedure. -
Page 11: Replacing Carbon Brushes
► 1 . Brush holder cap To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ► 1 . Triangular rule 2. Base 3. Adjusting screw 4. Clamping screw OPTIONAL... - Page 12 • Hex wrench • Dust nozzle (with lever) • Dust nozzle (without lever) • Guide rail (for HS7610) • Bevel guide (for HS7610) • Clamp (for HS7610) • Sheet (for HS7610) • Rubber sheet (for HS7610) • Position sheet (for HS7610) • Guide rail adapter (for HS7610) • Rule bar (for HS7610) NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.