hit counter script
LG 49XS4F-B.AUS Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 49XS4F-B.AUS
  6. Owner's manual
LG 49XS4F-B.AUS Owner's Manual

LG 49XS4F-B.AUS Owner's Manual

Monitor signage
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it
for future reference.
49XS4F
55XS4F
www.lg.com
Copyright © 2019 LG Electronics Inc. All Rights Reserved.

Advertisement

Table of Contents
loading

Related Manuals for LG 49XS4F-B.AUS

Summary of Contents for LG 49XS4F-B.AUS

  • Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 49XS4F 55XS4F www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved.

  • Page 2: Table Of Contents

    ASSEMBLY AND PREPARATION .......8 - Optional Accessories ............8 - Buttons ..................9 - Portrait Layout ..............10 - Attaching and removing the LG Logo Bracket ..............10 - Installing on a Wall ............12 - Safety and Precaution Guide for Installation .................15 REMOTE CONTROL ....16 MAKING CONNECTIONS ...

  • Page 3: Important Precautions

    WARNING: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. IMPORTANT PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING Failure to follow those warnings may result in death, serious injury or damage to the product or other property. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
  • Page 4 • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord. - You may be electrocuted due to excess moisture. •...

  • Page 5: Precautions In Installing The Product

    Do not add accessories that have not been designed for this display. • If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact LG Customer Service. - If you continue to use without taking proper measures, electrical shock or fire can occur.

  • Page 6: Precautions For Moving The Product

    Precautions for Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •...

  • Page 7: Precautions For Using/Cleaning The Product

    Do not attempt to disassemble, repair or modify the product yourself. - Fire or electric shock can occur. - Contact LG Customer Service for repair. • When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the product.

  • Page 8: Assembly And Preparation

    SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment.

  • Page 9: Buttons

    Buttons The image may be different according to the model. Screen Buttons Adjusts up and down. Moves left and right. Displays the current signal and mode. Accesses the main menus, or saves your input and exits the menus. Change the input signal. Turns the power on or off.

  • Page 10: Portrait Layout

    LG Logo Bracket to the bottom rear of the monitor. LG Logo Bracket After removing the screw, remove the LG Logo Bracket. When re-attaching the LG Logo Bracket, repeat the process in reverse order.
  • Page 11 LG Logo Bracket to the bottom rear of the monitor. After removing the screw, remove the LG Logo Bracket. Align with the hole on the left side to attach the LG Logo Bracket with a screw.

  • Page 12: Installing On A Wall

    Screws which are longer than standard length may damage the inside of the monitor. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws.
  • Page 13 Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
  • Page 14 WARNING • If the monitor is not positioned in a sufficiently stable location, there is a danger that it will fall. Many injuries, particularly to children, can be avoided by taking simple precautions such as: - Using cabinets or stands recommended by the manufacturer. - Only using furniture that can safely support the monitor.

  • Page 15: Safety And Precaution Guide For Installation

    Safety and Precaution Guide for Installation Direct Sunlight • Make sure to keep sufficient space between the product and the window glass. (100 mm (3.9 inches) or more) • Do not expose to direct sunlight for a prolonged period. • Attach a film with UV-blocking properties to the window glass. - Protect the display with cloth or a box when storing the device after it has been powered off.

  • Page 16: Remote Control

    REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
  • Page 17 Selects the Picture Mode. (HOME) Activates the Launcher. Enters the White Balance menu. (SETTINGS) Accesses the main menus or saves your input and exit menus. This function is not supported in this model. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input.

  • Page 18: Making Connections

    MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided.
  • Page 19 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core, such as a DVI-D cable. • If you turn the monitor on when the set is cold, the screen may flicker.

  • Page 20: Connecting Multiple Monitors

    Connecting Multiple Monitors To use multiple products, first connect an external device to the product, connect one end of the supported signal input cable to the connector of the product, and then connect the other end to the connector of the product you wish to connect to.

  • Page 21: Using The Input List

    Using the Input List (HOME) • HDMI1 HDMI2 DVI-D DISPLAYPORT...

  • Page 22: Troubleshooting

    TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message • The signal from the PC (Graphics card) is out of the vertical or appear? horizontal frequency range of the product.
  • Page 23 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
  • Page 24 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.

  • Page 25: Product Specifications

    PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). Thin Film Transistor (TFT) LCD screen Screen type Liquid Crystal Display (LCD) Screen 1920 x 1080 @ 60 Hz Maximum resolution...
  • Page 26 49XS4F LCD screen Pixel pitch 0.5593 mm (H) x 0.5593 mm (V) Rated power AC 100-240 V ~ 50/60 Hz 3.9 A On Mode: 345 W (Typ.) Power Power consumption Sleep Mode: ≤ 0.5 W Standby Mode: ≤ 0.5 W 0 °C to 30 °C (32 °F to 86 °F) (Direct Sunlight) Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) (Without Direct Sunlight) Operating Humidity...
  • Page 27 HDMI / DVI-D / DISPLAYPORT (PC) Support Mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 44.772 59.855 1366 x 768 47.712 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080...

  • Page 28: Licenses

    LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
  • Page 29 Supplier’s Declaration of Conformity Trade Name Responsible LG Electronics USA, Inc. Party Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ The model and serial number of the product are 07632 located on the back and on one side of the product.
  • Page 30 USER GUIDE LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. webOS 3.0 www.lg.com...
  • Page 31 - Control Manager ............29 com. How to Use LG Electronics will also provide open source code to you on CD-ROM for a charge covering the Follow the steps below if you encounter issues cost of performing such distribution (such as the...

  • Page 32: User Settings

    NOTE • The software-related contents may be changed without prior notice due to upgrade of the product functions. • Some features described in the User Guide may not be supported in certain models. • SNMP 2.0 is supported. USER SETTINGS Main Menu Settings Picture Settings To Select Picture Mode...
  • Page 33 To fine-tune the picture mode [Picture] [Picture Mode Settings] [Customize] • [Backlight]/[OLED Light]: Adjusts the brightness of the screen by controlling the LCD backlight. The closer the value is to 100, the brighter the screen is. • [Contrast]: Ajusts the difference between the light and dark areas of the picture. The closer the value is to 100, the greater the difference is.
  • Page 34 • [Picture Options]: Customizes the picture options. - [Noise Reduction]: Removes irregularly generated tiny dots for a clear picture. - [MPEG Noise Reduction]: Reduces the noise produced while creating digital video signals. - [Black Level]: Adjusts the black level of the picture to correct the brightness and contrast of the picture. (Recommended settings according to input signal: RGB 0–255: High, RGB 16–235: Low, YCbCr: Low) - [Real Cinema]: Optimizes the video image for a cinematic look.
  • Page 35 To use the Energy Saving function [Picture] [Energy Saving] Reduces power consumption by adjusting peak screen brightness. • [Auto]: Adjusts the brightness of the monitor according to ambient light. (This feature is available only with certain models.) • [Off]: Disables the Energy Saving mode. •...

  • Page 36: Sound Settings

    Sound Settings • Only applies to certain models. To select a Sound Mode [Sound] [Sound Mode] The best sound quality will be selected automatically depending on the video type currently being watched. • [Standard]: This sound mode works well for content of all types. •...
  • Page 37 Some recently connected devices may automatically attempt to reconnect to the Signage monitor when it is turned • It is recommended that you set LG audio devices that support LG Sound Sync to LG TV mode or LG Sound Sync mode before connecting.

  • Page 38: Network Settings

    Network Settings To Set a Signage Monitor Name [Network] [Signage Name] You can set a name for Signage Monitor that will be used on the network by using the on-screen keyboard. To Set Your Wired Network [Network] [Wired Connection (Ethernet)] •...
  • Page 39 For details, contact your ISP. • LG is not responsible for any malfunction of the display and/or the Internet connection feature due to communication errors/malfunctions associated with your Internet connection, or other connected equipment.
  • Page 40 NOTE • If you want to access the Internet directly on your display, the Internet connection should always be on. • If you cannot access the Internet, check the network conditions from a PC on your network. • When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. •...

  • Page 41: General Settings

    General Settings To configure the language [General] [Menu Language] Select one of the languages on the menu displayed on the screen. • [Menu Language]: Sets a language for Signage. Setting up the keyboard language [General] [Keyboard Languages] Select the language you wish to show on the keyboard. •...
  • Page 42 Configuring Set ID [General] [Set ID] • [Set ID](1 to 1000): Assigns a unique Set ID number to each product when several products are connected for display. Assign numbers ranging from 1 to 1000 and exit the option. You can control each product separately by using the Set ID you assigned to each product.
  • Page 43 Configuring the Dual-View Screen (For double-sided flat OLED models only) [General] [Dual-View Screen Setting] • [Front Screen Name]: Sets the name of the front screen. • [Back Screen Name]: Sets the name of the back screen. • [Screen Swap]: Swaps the images on the front and back side of the screens. •...

  • Page 44: Entertainment

    ENTERTAINMENT Using Multimedia Features Connecting USB/SD Storage Devices Connect a USB storage device such as a USB flash memory, SD storage devices or an external hard drive to the display and use multimedia features. CAUTION • Do not turn the monitor off or remove the USB storage device while Photo & Video or Music is playing. •...
  • Page 45 Tips for using USB/SD storage devices • Only a USB storage device can be recognized. • A USB device does not work effectively when it is connected via a USB hub. • A USB storage device using an automatic recognition program may not be recognized. •...
  • Page 46 • If your USB storage device has multiple partitions, or if you use a USB multi-card reader, you can use up to four partitions or USB storage devices. • If a USB storage device is connected to a USB multi-card reader, its volume data may not be detected. •...

  • Page 47: Photo & Video

    Photo & Video • The photo feature is not supported in OLED models. Supported Photo & Video Files Supported External Subtitle Format • *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX), *.dcs (DLP Cinema) NOTE • Subtitles are not supported in certain models.
  • Page 48 Maximum data transfer rate • Full HD video H.264 1920 x 1080@60P BP/MP/HP@L4.2 40 Mbps HEVC 1920 x 1080@60P MP@L4.1, Main10 Profile@L4.1 40 Mbps • Ultra HD (For Ultra HD models only) H.264 1920 x 1080@60P 4096 x 2160@30P BP/MP/HP@L5.1 50 Mbps HEVC 4096 x 2160@60P MP@L5.1, Main10 Profile@L5.1 50 Mbps Supported Photo File File Format...

  • Page 49: Viewing Photos And Videos

    • (For Ultra HD models only) Ultra HD image: 3840 X 2160 Some HEVC-encoded Ultra HD videos other than the content officially provided by LG Electronics may not be played. Some codecs can be used after upgrading software. Extension Codec .mkv, .mp4, .ts...

  • Page 50: Scheduled Playing

    Scheduled Playing • Only applies to certain models. You can schedule your selected content to play at a certain time. (Scheduled playing is available with external inputs.) Select your desired storage device. Enter the folder that contains the file you wish to schedule. Click the New Scheduled Playing button in the upper right.

  • Page 51: Music

    Music Supported Music Files • Some of the models that do not support the audio output cannot play the music. File Format Item Information .mp3 Bit rate 32 Kbps to 320 Kbps Sample freq. 16 KHz to 48 KHz Support MPEG1, MPEG2 Channels Mono, Stereo...

  • Page 52: Supersign Contents

    SuperSign Contents Plays stored files using the Export option in SuperSign Editor. To play back the stored files using the Export option Only contents distributed by SuperSign Manager are displayed and selectable. If there is a USB/SD storage device connected, the image on the USB/SD device is outputted additionally. NOTE •...

  • Page 53: Local Contents Scheduler

    Local Contents Scheduler • Only applies to certain models. • The recommended resolution for scheduled photo playback is 4096 x 2160 or below. Setting a Scheduled Playing You can create a scheduled playing using the Local Contents Scheduler and the Photo & Video app. Scheduled Playing with Photo &...

  • Page 54: Screen Share

    ) program on your laptop. Any nearby LG Signages supporting WiDi are detected. In the list of detected displays, select a Signage to connect to and then, click Connect. Enter the 8-digit PIN number (a) displayed on the Signage in the input field of your laptop (b) and click Continue.

  • Page 55: Group Manager

    Group Manager • Only applies to certain models. Using this template-based content editing program, you can produce, manage and play content. There are three modes: Master, Slave and StandAlone. The program can be used to distribute and play schedules between the Master and Slave.
  • Page 56 How to Use • Monitors: Run the app in the Launcher bar and add/edit/delete the desired content. • Mobile devices: Run the app in the Launcher bar and get access using the QR code or URL provided. NOTE • If you use a mobile device, you need to go through an authorization process using a PIN code. You can check the initial password in the app within the Launcher bar.

  • Page 57: Leveler Tool

    Leveler Tool • Only applies to certain models. You can check whether the product is horizontally and vertically level when installing the product outdoors in an enclosure. Accessing the Leveler Tool You can check whether the product is horizontally and vertically level. Exiting the Leveler Tool Exit the Leveler Tool by pressing the EXIT key on your remote control.

  • Page 58: Control Manager

    Control Manager • Only applies to certain models. You can control and check the status of the display through web browser. This function is available on PC and mobile device. CAUTION • Supported resolutions (this program is optimized for the following resolutions): - 1920 x 1080 / 375 x 667 •...

  • Page 59: How To Use

    How to Use On a PC Enter ‘https://Product IP address:3737’ in the browser's address bar to access the Control Manager login page. Enter the password in the Password window. (You can check the initial password in the app within the Launcher bar.) Click the Login button after entering the password to access the Dashboard.

  • Page 60: Follow The Steps Below If You Encounter Issues

    Follow the steps below if you encounter issues with your security certificate while attempting to access. On Chrome Click 'ADVANCED' Click 'Proceed to product IP address (unsafe)'...
  • Page 61 On FireFox Click 'Advanced' Click Add 'Exception...'...
  • Page 62 Click 'Confirm Security Exception' * The text of the links and buttons may differ depending on the OS (Operating System) or language settings used.

  • Page 63: Multi-Screen

    Multi-Screen Changing Screen Input Press the button on the top right of each split • Only applies to certain models. screen to select the desired input. This feature allows you to view multiple external inputs and videos on a single screen. NOTE Accessing Multi-Screen •...

  • Page 64: Picture Id Settings

    PICTURE ID Settings NOTE • If PICTURE ID is set to 2, only the upper right monitor, • Only applies to certain models. which has a Set ID of 2, can be controlled by IR [PICTURE ID] is used to change the settings of a signals.

  • Page 65: Ir Codes

    IR CODES All models do not support the HDMI/USB function. Some key codes may not be supported depending on the model. Code (Hex) Function Remarks (POWER) Remote control button MONITOR ON Remote control button MONITOR OFF Remote control button (Energy Saving) Remote control button (INPUT) Remote control button...
  • Page 66 Code (Hex) Function Remarks (SETTINGS (Menu)) Remote control button Auto Config. Remote control button (Up) Remote control button (Down) Remote control button Remote control button (Right) (Left) Remote control button Remote control button (OK) (BACK) Remote control button TILE Remote control button EXIT Remote control button PICTURE ID ON (RED)

  • Page 67: To Control Multiple Products

    TO CONTROL MULTIPLE PRODUCTS • Only applies to certain models. Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, the Set ID must be between 1 and 1000 without being duplicated. Connecting the Cable •...

  • Page 68: Communication Parameter

    Communication Parameter NOTE • When using three-wire connections (non-standard), Baud Rate: 9600 bps an IR daisy chain cannot be used. Data Length: 8 bit • Be sure to only use the provided gender to connect Parity Bit: None properly. Stop Bit: 1 bit •...

  • Page 69: Command Reference List

    Command Reference List COMMAND DATA (Hexadecimal) [Power] 00 to 02 [Select input] See [Select Input] [Aspect Ratio] See [Aspect Ratio] [Energy Saving] See [Energy Saving] [Picture Mode] See [Picture Mode] [Contrast] 00 to 64 [Brightness] 00 to 64 [Sharpness] 00 to 32 [Color] 00 to 64 [Tint]...
  • Page 70 COMMAND DATA (Hexadecimal) [Reset] 00 to 02 [Current Temperature] [Key] See [Key] [Time Elapsed] [Product Serial Number] [Software Version] [White Balance Red Gain] 00 to FE [White Balance Green Gain] 00 to FE [White Balance Blue Gain] 00 to FE [White Balance Red Offset] 00 to 7F [White Balance Green Offset]...
  • Page 71 COMMAND DATA (Hexadecimal) [Check the status] See [Check the status] [Check Screen] 00 to 01 [Speakers] 00 to 01 [Daylight Saving Time] See [Daylight Saving Time] [PM Mode] n, 0c 00 to 03 [ISM Method] See [ISM Method] [Network Settings] n, 80(81)(82) See [Network Settings] [Auto-adjustment] [H Position]...
  • Page 72 COMMAND DATA (Hexadecimal) [Beacon] n, 88 00 to 01 [Aspect Ratio] ([Rotation]) n, 89 00 to 01 [Easy Brightness Control Mode] 00 to 01 [Easy Brightness Control Schedule] See [Easy Brightness Control Schedule] [MultiScreen] Mode & [Input] See [MultiScreen] Mode & [Input] [Aspect Ratio] ([MultiScreen]) See [Aspect Ratio] ([MultiScreen]) [Screen Mute] ([MultiScreen])

  • Page 73: Transmission/Reception Protocol

    Transmission/Reception Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: Identifies between the factory setting and the user setting modes. * [Command2]: Controls monitor sets. * [Set ID]: Used for selecting a set you want to control. A unique Set ID can be assigned to each set ranging from 1 to 1000(01H~3E8H) under Settings in the OSD menu.
  • Page 74 01. [Power] (Command: k a) 03. [Aspect Ratio] (Command: k c) Controls the power on/off of the set. Adjusts the aspect ratio. Transmission Transmission (k)(a)( )(Set ID)( )(Data)(Cr) (k)(c)( )(Set ID)( )(Data)(Cr) Data 00: Off Data 01: 4:3 01: On 02: 16:9 02: Restart 04: Zoom...
  • Page 75 05. [Picture Mode] (Command: d x) 08. [Sharpness] (Command: k k) Selects a picture mode. Adjusts the screen sharpness. Transmission Transmission (d)(x)( )(Set ID)( )(Data)(Cr) (k)(k)( )(Set ID)( )(Data)(Cr) Data 00: Vivid Data 00~32: Sharpness 0 to 50 01: Standard Acknowledgement 02: Cinema (k)( )(Set ID)( )(OK/NG)(Data)(x)
  • Page 76 12. [Balance] (Command: k t) 15. [Volume Control] (Command: k f) Adjusts the sound balance. Adjusts the playback volume. Transmission Transmission (k)(t)( )(Set ID)( )(Data)(Cr) (k)(f)( )(Set ID)( )(Data)(Cr) Data 00~64: Left 50 to right 50 Data 00~64: Volume 0 to 100 Acknowledgement Acknowledgement (t)( )(Set ID)( )(OK/NG)(Data)(x)
  • Page 77 17. [Time] 2 (hour/minute/second) (Command: f x) 20. [Off Timer] (Repeat/Time) (Command: f e) Adjusts the Time 2 (hour/minute/second) value. Configures Off Timer (Repeat/Time) settings. Transmission Transmission (f)(x)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) (f)(e)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 00~17: 00 to 23 hours Data1 Data2...
  • Page 78 21. [On timer ](Repeat/Time) (Command: f d) 22. [On Timer Input] (Command: f u) Configures On Timer (Repeat/Time) settings. Select an external input for the current On Time setting and add a new schedule. Transmission Transmission (f)(d)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) (f)(u)( )(Set ID)( )(Data1)(Cr) Data1 (f)(u)( )(Set ID)( )(Data1)()(Data2)(Cr)

  • Page 79: Current Temperature] D N

    23. [No Signal Power Off] (15Min) (Command: f g) 26. [Reset] (Command: f k) Sets the monitor to enter Automatic Standby mode if there is no signal Performs the reset function. for 15 minutes. Screen Reset can only be performed in RGB input mode. Transmission Transmission (f)(g)( )(Set ID)( )(Data)(Cr)

  • Page 80: Time Elapsed] D L

    29. [Time Elapsed] (Command: d l) 33. [White Balance Green Gain] (Command: j n) Checks the elapsed time. Adjusts the white balance green gain value. Transmission Transmission (d)(l)( )(Set ID)( )(Data)(Cr) (j)(n)( )(Set ID)( )(Data)(Cr) Data FF: Read status Data 00~FE: Green Gain 0 to 254 FF: Checks the green gain value Acknowledgement...

  • Page 81: White Balance Blue Offset] S Z

    37. [White Balance Blue Offset] (Command: s z) 40. [Tile Mode] (Command: d d) Adjusts the white balance blue offset value. Sets the Tile Mode and sets values for the tile rows and columns. Transmission Transmission (s)(z)( )(Set ID)( )(Data)(Cr) (d)(d)( )(Set ID)( )(Data)(Cr) Data 00~7F: Blue Offset 0 to 127...

  • Page 82: Natural Mode] D J

    43. [Natural Mode] (in Tile mode) (Command: d j) 46. [Power On Delay] (Command: f h) When displaying the image naturally, the part of the image that would Sets the schedule delay when the power turns on. (unit: seconds). normally be displayed in the gap between the monitors is omitted. Transmission Transmission (f)(h)( )(Set ID)( )(Data)(Cr)

  • Page 83: Fail Over Input Select] M J

    48. [Fail Over Input Select] (Command: m j) 50. [Local Key Operation] (Command: t o) Selects an input source for auto switch. Configures the local key operation settings of the product. * This command is only available when the Fail Over (auto) mode is set Transmission to Custom.

  • Page 84: Daylight Saving Time] S

    53. [Speaker] (Command: d v) Data 10 (Check Screen) Data1 00: Check Screen result NG Sets the speaker function. 07: Check Screen result OK Transmission * Sets to NG when Check Screen is set to Off or not supported. (d)(v)( )(Set ID)( )(Data)(Cr) Data 00: Off Data...

  • Page 85: Pm Mode] S

    55. [PM Mode] (Command: s n, 0c) 57. [Network Settings] (Command: s n, 80 or 81 or 82) Selects the desired PM mode option. Configures network and DNS settings. Transmission Transmission (s)(n)( )(Set ID)( )(0c)( )(Data)(Cr) (s)(n)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )(Data4)( ) (Data5)(Cr) Data 00: Sets the Power Off mode.

  • Page 86: Auto-Adjustment] J U

    58. [Auto-adjustment] (Command: j u) 61. [H Size] (Command: f s) Automatically corrects the position and shaking of the picture. (Works Adjusts the horizontal size of the screen. This feature only works when the only in RGB-PC input mode.) Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution.

  • Page 87: Intelligent Auto]

    64. [Intelligent Auto] (Command: t i) 67. [Time Sync] (Command: s n, 16) Selects the desired Intelligent Auto option. Configures the Time Sync. Transmission Transmission (t)(i)( )(Set ID)( )(Data)(Cr) (s)(n)( )(Set ID)( )(1)(6)( )(Data)(Cr) Data 00: Off Data 00: Off 01: On 01: On * This feature works in the Master mode.

  • Page 88: Studio Mode] S N

    70. [Studio Mode] (Command: s n, 83) 73. [DPM (Standby Mode) Wake Up Control] (Command: s n, 0b) Sets Studio Mode to on/off. Sets the DPM Wake up Control Mode. Transmission Transmission (s)(n)( )(Set ID)( )(8)(3)( )(Data)(Cr) (s)(n)( )(Set ID)( )(0)(b)( )(Data)(Cr) Data 00: Off Data...

  • Page 89: Aspect Ratio] ([Rotation]) S N

    76. [Aspect Ratio (Rotation)] (Command: s n, 89) 78. [Easy Brightness Control Schedule] (Command: s s) Controls the Aspect Ratio (Rotation) screen. Sets Easy Brightness Control schedules. (This command works only when Content Rotation is on.) Transmission Transmission (s)(s)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) (s)(n)( )(Set ID)( )(8)(9)( )(Data)(Cr) Data1 Data...

  • Page 90: Aspect Ratio] ([Multiscreen]) X D

    79. [MultiScreen Mode & Input] (Command: x c) 81. [Screen Mute] (MultiScreen) (Command: x e) Saves or controls the MultiScreen Mode and input. Turns on/off each screen in MultiScreen. Transmission Transmission (x)(c)( )(Set ID)( )(Data1)( )(Data2)( )(Data3( )(Data4) (x)(e)( )(Set ID)( )(Data1)( )(Data2)(Cr) ( )(Data5)( )Cr) Data1 01: Controls the Main input...

  • Page 91: Wireless [Wake On Lan (Networked Standby Mode)] S N

    84. Wireless [Wake On LAN (Networked standby mode)] 87. [Holiday Schedule] (Command: s n, 1b) (Command: s n, 90) Configures the Holiday Schedule. Sets Wireless Wake-on-LAN. Transmission Transmission (s)(n)( )(Set ID)( )( )(1)(a) (s)(n)( )(Set ID)( )(9)(0)( )(Data)(Cr) ( )(Data1)( )(Data2)( )(Data3)( )(Data4)(Cr) Data 00: Off Data1...

  • Page 92: Dual Screen Off] S N

    88. [Dual Screen Off] (Command: s n, 92) 91. [Luminance Value Read] (Command: m u) Turn Dual Screen On or Off. Reads luminance value. Transmission Transmission (s)(n)( )(Set ID)( )(9)(2)( )(Data)(Cr) (m)(u)( )(Set ID)( )(FF)(Cr) Data 00: MainScreen – On / SubScreen – On 01: MainScreen –...

  • Page 93: T 93 [Power Indicator Settings] F O

    93. [Power Indicator] (Command: f o) 96. [Hybrid Mode] (Command: s n, 96) Sets the Power Indicator Settings. Sets display’s transparency mode. Transmission Transmission (f)(o)( )(Set ID)( )(Data)(Cr) (s)(n)( )(Set ID)( )(9)(6)( )(Data)(Cr) Data 00: Off Data 00: Hybrid (effect: Off) 01: On 01: Hybrid (effect: Full white) 02: Semi-Transparent...

  • Page 94: Hdmi It Contents] S N

    99. [HDMI IT Contents] (Command: s n, 99) 102. [No Signal Image] (Command: s n, a9) Uses HDMI data to automatically set Picture Mode. Turns No Signal Image On or Off. Transmission Transmission (s)(n)( )(Set ID)( )(9)(9)( )(Data)(Cr) (s)(n)( )(Set ID)( )(a)(9)( )(Data)(Cr) Data 00: Off Data...

  • Page 95: Analog Signage Blu On/Off

    105. Analog Signage BLU On/Off Time Setting (Command: s n, c3) Set on/off schedule for Analog Signage BLU. Transmission (s)(n)( )(Set ID)( )(c)(3)( )(Data1)( )(Data2)( ) (Data3)( )(Data4)( )(Cr) Data1 Set power on schedule (hour) 00~17: 00~23 (hour) Data2 Set power on schedule (minute) 00~3B: 00~59 (minute) Data3 Set power off schedule (hour)
  • Page 97 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating the your set and retain it for future reference. webOS 3.0 www.lg.com...
  • Page 98 CONTENTS ACCESSING INSTALLATION White Balance MENU ..........4 Application Web Browser INSTALLATION MENU ....5 Status Message - Signage Setup..............5 SIMPLINK Setup Power On Status Local Dimming Wake On LAN Holiday Schedule LAN Daisy Chain Easy Brightness Control Power Off Management Analog Signage BLU Setting Rotation Crestron Beacon...
  • Page 99 - Fail Over ................22 - Server ...................27 Set Automatically Auto Server IP Type Manual Server IP - ISM Method ..............23 Server Status Mode Port Number Repeat Secured Connection Wait Control Server IP Type Duration Control Server IP Repeat Day Control Server Port Start Time Control Server Status End Time...

  • Page 100: Accessing Installation Menu

    ACCESSING INSTALLATION MENU Press and hold the SETTINGS button for 5 seconds. When Input ID (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change...

  • Page 101: Installation Menu

    INSTALLATION MENU NOTE • Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status • You can select the operating status of the monitor when the main power is switched on. •...

  • Page 102: Power Off Management

    Power Off Management • No Signal Power Off (15 Min) - You can choose whether to use the 15 min force off feature. - You can set this option to On or Off. - If you set this option to On, the product turns off when it has remained in no signal status for 15 minutes. - If you set this option to Off, the 15 min force off feature is disabled.
  • Page 103 • PM Mode - Power Off: Normal DC off status. - Sustain Aspect Ratio: Normal DC off status except that Switching IC stays on. On certain models, this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes. - Screen Off: Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins, 4 hours), or Abnormal Shut Down.

  • Page 104: Rotation

    Rotation • OSD Portrait Mode - This feature allows you to rotate the OSD clockwise. - You can set this feature to Off/90/180/270. (Some models only support certain settings.) - If you set this feature to Off, the feature is disabled. - If you set this feature to 90, the OSD rotates 90 degrees clockwise.

  • Page 105: Beacon

    Enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (on/off toggle): Enables the Beacon feature. • Supports LG Beacon/iBeacon/Eddystone Type Beacon features. • LG Beacon/iBeacon - Beacon UUID (hex): Sets the UUID. 1. Field1: 4byte hex value (8 digits) 2.

  • Page 106: Power On Delay (0 ~ 250)

    Power On Delay (0 ~ 250) • This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultaneously. • You can set the delay interval in the range of 0 to 250 seconds. Check Screen •...

  • Page 107: Interface Selection

    Interface Selection • You can set communication with the connected OPS. • DISPLAY: Enables communication with external devices via the serial port. • OPS: Enables communication via the OPS connected to the product. • Interface Selection is enabled only when the OPS kit is connected. OPS Power Control •...

  • Page 108: Sync Mode

    Sync Mode • Syncs the products to the time, brightness and content of one product. • Off: Sync is disabled. • RS-232C: Syncs multiple monitors connected via RS-232C. - Master/Slave: These monitors can be set to Master or Slave. Only one monitor should be set to Master mode for this feature to work properly.

  • Page 109: Intelligent Auto

    Intelligent Auto • Adjusts the size, position, and phase of the monitor's screen automatically at the recognized resolution. This feature is available only in RGB input mode. Studio Mode • Outputs the images with a lower color temperature. • You can set this feature to On or Off. •...

  • Page 110: Application

    Application • Adds/deletes applications in the Launcher bar. • We recommend that if you are to remove the Screen Share app from the home launcher by unchecking the Screen Share item, you should reboot your system after removal. • When Content Rotation or OSD Portrait Mode is set to On, the 'Group Manager' app is removed from the launcher and the 'Group Manager' item is deactivated.

  • Page 111: Status Message

    Status Message • Sets up a feature that sends the status of Signage to users' email addresses. • The administrator can set Status Message to On or Off. • Messaging Period: Sets a time interval to send messages. You can select either When Failure Status or Weekly. •...

  • Page 112: Simplink Setup

    SIMPLINK Setup • When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. • Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'.

  • Page 113: Analog Signage Blu Setting

    Analog Signage BLU Setting • Sets the function to control the Analog Signage BLU. • On/Off Time Setting: Adjusts the schedule of the BLU. • BLU Manual On/Off: Use the On or Off setting to set the BLU to On or Off without being associated with the schedule function.

  • Page 114: Signage 365 Care

    Signage 365 Care • You can install the Signage 365 Care (fault diagnosis) solution for fault diagnosis and prediction service. • Install: Installs the Signage 365 Care solution. 1) ENTER ACCOUNT NUMBER: Enters the 6-digit account number to install the Signage 365 Care solution. - Account Number: The number assigned when the Signage 365 Care solution is registered.

  • Page 115: Guide To Using Content Rotation

    Guide to Using Content Rotation [Portrait installation setting] You can turn the image into a portrait image using Content Rotation. When installing the display rotated 90 degrees: Set Content Rotation to 270. When installing the display rotated 270 degrees: Set Content Rotation to 90. Example) When installing the display rotated 90 degrees Original Content Rotation...
  • Page 116 [Video wall installation setting] You can implement a landscape and portrait video wall using Content Rotation. Example) Tile mode 2 x 2 * Landscape video wall * Portrait video wall - Set Content Rotation to 90 Original Tile Mode <Landscape> Rotating displays Content Rotation (90 degrees)

  • Page 117: Usb Cloning

    USB Cloning You can copy the product settings to other sets. Send to USB • You can save the current settings in file format to a USB device. • Select the file name and press the OK button to complete •...

  • Page 118: Fail Over

    Fail Over The input source with the highest priority will be selected. • The Auto-Fail Over feature is disabled. Auto • The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. •...

  • Page 119: Ism Method

    ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode • Selects the desired ISM Method mode. • Normal: Disables the ISM method.

  • Page 120: Repeat

    Repeat • Off, just 1 time: If you select the desired mode and press DONE, ISM operates immediately. • On: If the screen remains still for a specified wait time, ISM operates for the specified duration time. • On, with moving detection: Only applies to Orbiter mode. If the screen remains still for the specified Wait time, ISM operates for the specified Duration time.

  • Page 121: Action Cycle

    Action Cycle • You can select from among 1–10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins. • This option is available only when you have selected Inversion or Orbiter. • Orbiter: Moves the position of the screen at specified intervals. •...

  • Page 122: Bar Image Download

    Bar Image Download • To download an image, the image file must be located under the folder titled "ISM" on your USB drive. • Make sure to delete the old images stored in the internal memory before downloading a new image file. •...

  • Page 123: Server

    Server Set Automatically • The monitor settings will be set automatically so that the SuperSign server can search it. Server IP Type • Select the IPv4 or the IPv6 type. Server IP • This is a menu where you can set an IP address for the SuperSign server. Server Status •...

  • Page 124: Lock Mode

    Lock Mode • You can prevent the use of USB devices. • You can prevent OSD from displaying. Wi-Fi • This feature enables you to turn the Wi-Fi feature on or off. Reset to Initial Settings • You can restore the initial settings with this feature. IR Operation •...

This manual is also suitable for:

55xs4f49xs4f

Table of Contents