This guide addresses only those items. You should use good judgment to identify potential safety hazards due to attachment of non-Lenovo features or options not covered by this inspection guide.
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
The safety notices in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese DANGER DANGER DANGER Lenovo V17 Gen 2 Hardware Maintenance Manual...
• Check for obvious damage to a hard disk drive. If the spindle of a hard disk drive becomes noisy, the hard disk drive might have been dropped or subject to excessive force. CRU list Table 1. Model: Lenovo V17 G2 ITL (Machine type: 82NX) Type ac power adapter...
Chapter 3. Idetifying FRUs (CRUs) Locate FRUs and CRUs The exploded illustrations help Lenovo service technicians identify FRUs or CRUs that they may need to replace when servicing a customer’s computer. Figure 1. Lenovo V17 G2 ITL exploded view Table 2. FRU (CRU) categories...
Page 30
Battery pack Lower case Touchpad cable Coin-cell battery Solid-state drive bracket Solid-state drive Solid-state drive thermal pad Wi-Fi card Memory module shielding Memory module System board ac power adapter Power cord Screw kit Lenovo V17 Gen 2 Hardware Maintenance Manual...
Chapter 4. Removing a FRU or CRU Service tools The following table lists tools for servicing Lenovo computers. Tools with a cross mark are needed for serving the product models as described by this publication. Prepare them before you service the product.
Make sure the computer has been shut down before servicing the computer. Step 1. Place the computer upside down on a flat surface. Step 2. Remove 10 screws. Step 3. Remove the lower case. Figure 5. Remove 10 screws Lenovo V17 Gen 2 Hardware Maintenance Manual...
Screw specifications Number of screws M2 x L6 M2 x L4 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Lower case Remove the memory module shielding Make sure the following FRUs (or CRUs) have been removed.
Figure 7. Remove the memory module shielding Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Memory module shielding Remove the memory module Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 32 “Remove the memory module shielding”...
Figure 8. Remove the memory module Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Memory module Remove the storage drive Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 32 Step 1.
Page 42
Figure 11. Remove four screws and the storage drive cable Screw specifications Number of screws M2 x L3.5 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Memory module Lenovo V17 Gen 2 Hardware Maintenance Manual...
Screw specifications Number of screws M3 x L3 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Storage drive bracket Remove the battery pack Remove the battery pack (with storage drive) Make sure the following FRUs (or CRUs) have been removed.
Figure 14. Remove the battery pack Screw specifications Number of screws M2 x L5 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Battery pack Remove the battery pack (no storage drive) Make sure the following FRUs (or CRUs) have been removed.
Page 45
Remove six screws and then remove the battery pack. Figure 16. Remove the battery pack Screw specifications Number of screws M2 x L3.5 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Chapter 4 Removing a FRU or CRU...
Figure 17. Remove the solid-state drive bracket Screw specifications Number of screws M2 x L2.8 Step 3. Remove the solid-state drive by pulling it away from the slot. Figure 18. Remove the solid-state drive Lenovo V17 Gen 2 Hardware Maintenance Manual...
Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Solid-state drive Remove the solid-state drive thermal pad Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 32 Step 1.
Figure 20. Remove the solid-state drive thermal pad Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Solid-state drive thermal pad Remove the heatsink For ITL models Make sure the following FRUs (or CRUs) have been removed.
Page 49
Figure 22. Loosen six screws and remove the heat sink Screw specifications Number of screws M x L Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement part: Heat sink Chapter 4 Removing a FRU or CRU...
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable. Figure 23. Disconnect the fan cable Step 2. Remove four screws and then remove the fan. Figure 24. Remove four screws and the fan Lenovo V17 Gen 2 Hardware Maintenance Manual...
Screw specifications Number of screws M2 x L3.5 Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: Fans Remove the Wi-Fi card Make sure the following FRUs (or CRUs) have been removed. “Remove the lower case” on page 32 Step 1.
Figure 26. Remove one screw and the Wi-Fi card Screw specifications Number of screws M2 x L2.8 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Wi-Fi card Remove the USB board Make sure the following FRUs (or CRUs) have been removed.
Figure 28. Remove the USB board Screw specifications Number of screws M2 x L2.8 Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: USB board Remove the USB board cable Make sure the following FRUs (or CRUs) have been removed.
Remove the USB board cable. Figure 29. Remove the USB board cable Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: USB board cable Remove the coin-cell battery Make sure the following FRUs (or CRUs) have been removed.
Step 2. Press the coin-cell battery outwards and then remove it from the system board. Figure 31. Remove the coin-cell battery Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Coin-cell battery Remove the fingerprint reader Make sure the following FRUs (CRUs) have been removed.
Remove the fingerprint reader. Figure 33. Remove the fingerprint reader Go to https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following replacement parts: Fingerprint reader Remove the system board Make sure the following FRUs (or CRUs) have been removed.
Page 57
“Remove the storage drive” on page 35 “Remove the battery pack” on page 37 “Remove the memory module” on page 34 “Remove the heatsink” on page 42 “Remove the system fan” on page 44 “Remove the coin-cell battery” on page 48 “Remove the Wi-Fi card”...
Step 3. Remove the system board. Figure 36. Remove the system board Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: System board Use a Golden Key U1 tool to flash-write key id information...
Page 59
Figure 37. Disconnect the battery pack cable, EDP cables, and antenna cables Step 2. Remove four screws and open both hinges. Figure 38. Remove four screws and open both hinges Screw specifications Number of screws M2.5 x L5 Step 3. Remove the upper case assembly.
Figure 39. Remove the upper case assembly Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: Upper case (with keyboard) Remove the LCD bezel Make sure the following FRUs (CRUs) have been removed. “Remove the upper case ” on page 52 Step 1.
Attention: Do not pull the LCD bezel from the outer sides of the LCD bezel, otherwise the hooks may be damaged. The lower side of the LCD bezel is fixed to the LCD panel with adhesive tape. Detach with care. Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: LCD bezel Remove the stripe cover Make sure the following FRUs (CRUs) have been removed.
Page 62
Step 2. Remove the EDP cable. Figure 43. Remove the EDP cable and remove the LCD panel Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Hinge Lenovo V17 Gen 2 Hardware Maintenance Manual...
Remove the LCD panel Make sure the following FRUs (CRUs) have been removed. “Remove the lower case” on page 32 “Remove the upper case ” on page 52 Step 1. Remove ten hinge screws and then carefully lift the LCD panel from the LCD cover. Figure 44.
Step 3. Remove the removable tapes and then remove the LCD panel. Figure 46. Remove the removable tapes and remove the LCD panel Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement part: LCD panel Remove the microphone rubber Make sure the following FRUs (CRUs) have been removed.
Step 1. Remove the microphone rubber. Figure 47. Remove the microphone rubber Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Microphone rubber Remove the camera Make sure the following FRUs (CRUs) have been removed.
Figure 48. Remove the microphone rubber Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: Camera Remove the EDP cable Make sure the following FRUs (CRUs) have been removed. “Remove the upper case ” on page 52 “Remove the LCD bezel”...
Page 67
Go to to look up the Lenovo part numbers of the following https://support.lenovo.com/partslookup replacement parts: EDP cable Chapter 4 Removing a FRU or CRU...
Page 68
Lenovo V17 Gen 2 Hardware Maintenance Manual...