Operating the device
5.4 Using the touch driver
AUTO Color
When the VGA color display is abnormal, you can adjust the color as the following steps:
1. Click the monitor to select the monitor you want to adjust the color.
2. Open a picture which only contains black and white color as the background.
3. Select "Menu" --> "AUTO Color".
Note
The current color setting cannot be restored after you select "AUTO Color".
Note
For SIMATIC IFP1200 Basic C, "AUTO ADJUST" and "AUTO Color" are not supported.
5.4
Using the touch driver
This chapter provides some tips on using the touch driver.
Open the On-Screen touch Keyboard
Siemens recommends you to turn on the On-Screen Keyboard for entering characters.
Go to Start, then select Settings --> Ease of Access --> Keyboard, and turn on the toggle
under Use the On-screen Keyboard.
A keyboard that can be used to move around the screen and enter text will appear on the
screen. The keyboard will remain on the screen until you close it.
Enable start On-Screen Keyboard each time you sign in
Go to Control Panel-->Ease of Access Center --> Use the computer without a mouse or
keyboard, Select the radio button next to "Use On-Screen Keyboard".
48
Operating Instructions, 06/2023, A5E46178354 - AD
IFP Basic