Table of Contents
Advertisement
Connect
On Signage
[LG Presenter]
On PC
1
Go to www.lge.com/LGP to download the Client.
2
Install and run the downloaded Client.
3
Enter the username you want and press
4
Select either auto search or manual search to connect your device.
Auto search
- When the list of Signage devices found in the network appears, select the one you want to connect to.
Manual search
- Click "New" , type the name of the device you want to connect and the IP address shown on Signage and click
[Connect].
5
Enter the PIN code you see on your Signage device into the PIN code field on the Client.
No.
Item
1
Auto search
2
Manual search
CAUTION
•
Signage and the PC need to be in the network that they can be connected to each other.
•
If a certain port (UDP 1900) of Signage is blocked, Client program cannot automatically search Signage.
•
Client program might not be able to connect to or share the screen with Signage via manual search, depending on the
network configuration.
the button.
1
2
Automatically search Signage in the same network.
Type the IP address and name manually, or select the device you want to connect in the
connection list.
Description
69
Advertisement
Chapters
Table of Contents
