Recycling And Disposal - Siemens SIMATIC ET 200SP Operating Instructions Manual
Hide thumbs
Also See for SIMATIC ET 200SP:
- System manual (320 pages) ,
- Manual (270 pages) ,
- Operating instructions manual (166 pages)
Table of Contents
Advertisement
Maintenance
11.11 Recycling and disposal
Procedure – Removing the CFast card
NOTICE
Removing the CFast card during operation
Do not remove the CFast card while the CPU 1515SP PC2 Open Controller is running.
1. Remove the seal.
2. Open the cover, using a screwdriver if necessary.
3. Press onto the CFast card.
The card is pressed out of the slot.
4. Pull the card out of the slot.
To do this, grip the rib on the underside of the memory card.
Procedure – Inserting the CFast card
1. Open the cover of the slot, using a screwdriver if necessary.
2. Insert the CFast card into the slot.
3. Press the CFast card into the slot until it clicks into place.
The CFast card is properly inserted if the cover can be closed without any resistance.
4. Close the cover.
11.11
Recycling and disposal
For ecologically sustainable recycling and disposal of your old device, contact a certificated
disposal service for electronic scrap or dispose of the device in accordance with the
regulations in your country.
74
NOTICE
Unauthorized access
Seal the cover to protect the CFast card with the operating system of the CPU 1515SP PC2
from unauthorized access.
CPU 1515SP PC2 (F/T/TF)
Operating Instructions, 03/2023, A5E42603425-AC
Advertisement
Table of Contents
