Table of Contents
Related Manuals for Siemens WT9H281IL
Summary of Contents for Siemens WT9H281IL
- Page 1 Tumble dryer WT9H281IL User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 24 1.1 General information.... 4 9.1 Automatic programmes... 24 1.2 Intended use...... 4 9.2 Timed programmes .... 25 1.3 Restriction on user group.. 4 10 Accessories...... 26 1.4 Safe installation ...... - Page 3 15 Cleaning and servicing ... 34 15.1 Tips on cleaning and care .. 34 15.2 Base unit ....... 34 15.3 Moisture sensor..... 36 16 Troubleshooting...... 38 17 Transportation, storage and disposal ........ 43 17.1 Preparing the appliance for transportation ...... 43 17.2 Disposing of old appliance ... 43 18 Customer Service.... 44 18.1 Product number (E-Nr.) and production number (FD)..
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance. -
Page 12: Energy Saving Mode
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a Damper laundry extends the pro- gramme duration and increases energy consumption. 4.1 Unpacking the appliance Observe the programme's maximum ATTENTION! load capacity. Objects remaining in the drum that → "Programmes", Page 24 are not designed for operation with a If the maximum load is exceeded,... -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 26 result in damage to the appliance. Immediately after transporting the ▶... -
Page 14: Water Drain Hose
en Installation and connection hose to drain away excess condens- Installation loca- Requirements ation directly into the waste water tion system. In a washer-dryer Only use the ori- Notes stack ginal connection ¡ Operate this appliance using the set from the water drain hose provided. - Page 15 Installation and connection en Pull out the condensation hose Push the water drain hose as far from the connecting piece. as it will go into the connecting piece. The condensation hose is connec- ted to the connecting piece at the Insert the water drain hose into the factory.
-
Page 16: Aligning The Appliance
en Installation and connection Water outlet connection types Secure the elbow to the gully. ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶ 4.5 Aligning the appliance sure that the wastewater drains away quickly and eliminate any In order to reduce vibrations and... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 27 Display → Page 19 Buttons → Page 21... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 25 Programme end → "Buttons", Page 22... -
Page 20: Dryness Level
en Display Display Designation Description Condensation Empty the condensation container container → Page 31. Insert the condensation container → Page 32. Fluff filter Clean the fluff filter → Page 28. Filter system on Clean the filter system on the base unit the base unit → Page 30. Cooling process The laundry is cooled while the drum is rotating, in order to avoid damage to the laundry. - Page 21 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
- Page 22 en Buttons Button Selection Description Finish in Up to 24 hours Set the programme end time. The programme duration is already included in the set number of hours. Once the programme has started, the pro- gramme duration is dis- played. Progr. Duration Multiple selection Set the programme dura- tion for timed pro-...
-
Page 23: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Ex- Multi-layered, thick laundry The laundry is dry. tra Dry that does not dry readily. -
Page 24: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 25: Timed Programmes
Programmes en Programme Description Max. load (kg) Once the laundry is dry, iron it or hang it up. The residual moisture is then distrib- uted evenly. Rapid 40' Dry items made of synthetics and light cotton. Towels Dry hard-wearing, heat-resistant towels and dressing gowns made of cotton or linen. -
Page 26: Accessories
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 44. Order number Connection kit To save space, stack the WZ11410 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 27: Laundry
Laundry en Turn the programme selector and 11 Laundry set the required programme. → "Programmes", Page 24 If required, adjust the programme 11.1 Preparing the laundry settings. → "Adjusting the programme set- ATTENTION! tings", Page 27 Objects remaining in the laundry may damage the laundry and the drum. 12.3 Adjusting the pro- Remove all items from any pock- ▶... -
Page 28: Changing The Activated Programme End Time
en operation a The display shows the programme Close the door. duration or the programme end Press Start/Reload . time. a After the programme has ended, 12.8 Cancelling the pro- the display shows: "End" . gramme Note: If "Hot" appears, the appli- Press Start/Reload . - Page 29 operation en Remove the fluff from the door. Disconnect the two-part fluff filter. Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air channel.
-
Page 30: Filter System On The Base Unit
en operation Clean the two fluff filters thoroughly 12.12 Filter system on the under warm, running water and base unit then dry them off. During drying, fluff from the laundry is collected in the base unit's filter sys- tem. The filter system protects the ap- pliance from fluff. -
Page 31: Condensation Container
operation en Use a soft brush to clean the heat Push the filter mat onto the retain- exchanger cover. ers. Make sure that you remove all dirt Ensure that the cleaned filter mat from the seal. is not deformed, damaged or in- verted when you push it onto the Clean the filter mat thoroughly un- retainers. -
Page 32: Childproof Lock
en Childproof lock Requirements Inserting the condensation ¡ The display shows the following container after drying: "End" Push the condensation container ▶ ¡ or the display shows the following in as far as it will go. during operation: Pull out the condensation con- tainer, keeping it level. -
Page 33: Basic Settings
Basic settings en 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 34: Changing The Basic Set- Tings
en Cleaning and servicing 14.2 Changing the basic set- nothing but water and a damp tings cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately. - Page 35 Cleaning and servicing en Open the lever for the heat ex- Use a soft brush to clean the heat changer cover. exchanger cover. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment.
-
Page 36: Moisture Sensor
en Cleaning and servicing Clean the opening with a soft, Close the maintenance flap. damp cloth. 15.3 Moisture sensor Close the base unit → Page 36. The moisture sensor in this appliance Closing the base unit measures how damp the laundry is Requirement: The base unit is open. during the drying cycle. - Page 37 Cleaning and servicing en Clean the moisture sensor with a sponge.
-
Page 38: Troubleshooting
en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 39 Troubleshooting en Fault Cause and troubleshooting Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 24. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
- Page 40 en Troubleshooting Fault Cause and troubleshooting Condensation in the Ensure that the water drain hose is connected cor- ▶ condensation tank rectly. even though the water → "Connecting the water drain hose", Page 14 drain hose is connec- ted. The programme does Childproof lock is activated. not start.
- Page 41 Troubleshooting en Fault Cause and troubleshooting The drying time is too Cleaning the heat exchanger. long. → "Cleaning the base unit", Page 35. Closing the base unit. → "Closing the base unit", Page 36. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The laundry is too Moisture sensor dirty. damp. → "Cleaning the moisture sensor", Page 36. ▶ The drying process is interrupted and the condensa- tion tank has been filled. → "Emptying the condensation container", Page 31. → "Inserting the condensation container", Page 32. → "Starting the programme", Page 27.
-
Page 43: Transportation, Storage And Disposal
Transportation, storage and disposal en Empty the condensation container 17 Transportation, stor- → Page 31. age and disposal Insert the condensation container → Page 32. Disconnect the appliance's mains 17.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 44: Customer Service
en Customer Service Information about current disposal 18.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate. -
Page 45: Consumption Values
Consumption values en 19 Consumption values The programme The actual values may deviate from Cupboard Dry the indicated values depending on Cottons (denoted by the arrow symbol) is the type of fabric, composition of suitable for drying cotton laundry with laundry to be dried, residual moisture a normal dampness level, and is the in the fabric, set degree of dryness, most efficient programme for drying... -
Page 46: Technical Data
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons Iron Dry 12.0 1000 1:37 0.84 Cottons Iron Dry 12.0 3:05 1.69... - Page 48 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001831407* 9001831407 (030221)