Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Declaration of Conformity
Operator training material
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface, lower the
cutting units, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait for
all moving parts to stop.
3.
Check the tire air pressure before use; refer to
Checking the Tire Air Pressure (page
Description
No parts required
No parts required
Right front hose guide
Left front hose guide
Cutting-unit kickstand
Hood lock, seal, and jam nut
Washer
CE decal
Production year decal
Warning decal
55).
Qty.
–
–
1
1
1
1
1
1
1
1
Qty.
1
Read the manuals before operating the machine.
1
Use the manual to reference engine information.
1
This document indicates conformity with certain standards.
1
Review the training material before operating the machine.
Note:
Adjust the tire air pressure before operating the
machine.
4.
Check the hydraulic-fluid level; refer to
the Hydraulic-Fluid Level (page
5.
Grease the machine; refer to
Bearings and Bushings (page
Important:
machine will result in premature failure of
critical parts.
6.
Open the hood and check the coolant level; refer
to
Checking the Coolant Level (page
7.
Check the level of the engine-oil level, and close
and latch the hood; refer to
of the Engine Oil (page
Note:
crankcase; however, check the oil level before
and after the engine is first started.
10
Use
Prepare the machine.
Adjust the control-arm position.
Install the cutting units.
Install the cutting-unit kickstand.
Install the CE hood lock.
Apply the CE decals.
Use
The tires are overinflated for shipping.
Failure to properly grease the
Checking the Level
46).
The engine ships with oil in the
Checking
62).
Greasing the
43).
58).
Advertisement
Table of Contents
