Table of Contents
Related Manuals for LG 8LG55UH5CBAEK
Summary of Contents for LG 8LG55UH5CBAEK
- Page 1 OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 49UH5C 55UH5C 65UH5C www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
-
Page 2: Table Of Contents
- Connecting the Stand ..........16 - Connecting the Speakers ..........18 - Connecting the IR Sensor .........20 - Portrait Layout ..............21 - Attaching and removing the LG Logo Bracket ..- Installing on a Wall ............24 REMOTE CONTROL ....26 MAKING CONNECTIONS ... 28 - Connecting to a PC............28... -
Page 3: Safety Precautions
WARNING - This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. - Page 4 If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the product’s picture quality, life cycle, and appearance. Please check with LG or a qualified installer before installing. This caution applies to a place where there is an abundance of fine dust or oil mist, chemical substances are used, the temperature is very high or low, the humidity is very high, or the product is likely to remain turned on for a long period of time (airport and train station), failure to do so will invalidate the warranty.
-
Page 5: Precautions To The Ac Adapter And Electrical Power
- If loosely connected, the poor connection may cause a fire or electric shock. • Be sure to use power cords and AC adapters provided or approved by LG Electronics, Inc. - The use of non-approved products may cause a fire or electric shock. - Page 6 • If you don’t intend to use the product for a long time, unplug the power cable from the product. - Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. • Fix the power cable completely. - If the power cable is not fixed completely, a fire can break out.
-
Page 7: Precautions In Moving The Product
Precautions In Moving the Product WARNING • Make sure to turn off the product. - You may be electrocuted or the product can be damaged. • Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be damaged. •... -
Page 8: Precautions In Using The Product
Precautions In Using the Product WARNING • Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. • When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •... -
Page 9: Mounting On A Wall
• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining. CHEMICALS WATER • Do not use products using high voltage around the Monitor. (e.g., a bug zapper) - Monitor may have malfunction as its electrical shock. -
Page 10: Licenses
LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 11: Assembly And Preparation
SuperSign Software & Manual - Downloading from the LG Electronics website. - Visit the LG Electronics website (http://partner.lge.com) and download the latest software for your model. • The warranty will not cover any damage caused by using the product in an excessively dusty environment. -
Page 12: Optional Accessories
Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit 49/55UH5C 65UH5C Screws Diameter 4.0 mm x Pitch 0.7 mm... - Page 13 Media Player kit (It may not be supported depending on the model.) Media Player Screws CD (Owner's Manual)/ Cards MP500/ MP700 OPS kit KT-OPSA Screws Connecting Cable Card (Easy Setup Guide) Power Cord Pixel sensor kit KT-SP0 NOTE • Cable holder/cable tie may not be available in some areas or for some models. •...
-
Page 14: Parts And Buttons
Parts and Buttons The image may be different according to the model. Buttons • INPUT: Changes the input source. MENU: Accesses the main menus, or saves your input and exits the menus. • • : Adjust the up and down. •... -
Page 15: Assembling The Memory Cover
Assembling the Memory Cover Assemble the cover with a screw as illustrated to prevent the USB memory from theft. -
Page 16: Connecting The Stand
Connecting the Stand - For certain models only. - The image may be different according to the model. 49/55UH5C... - Page 17 65UH5C...
-
Page 18: Connecting The Speakers
Connecting the Speakers - For certain models only. - The image may be different according to the model. Connect an input signal cable before installing the speakers. Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection. - Page 19 Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Basic installation Installation with OPS connected NOTE • Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may result in no sound.
-
Page 20: Connecting The Ir Sensor
Connecting the IR Sensor When you connect the cable to the product, the feature for receiving remote control signals is activated. Rotate the IR sensor according to the screen orientation (Landscape/Portrait). - The image may be different according to the model. Basic installation [Front] [Rear]... -
Page 21: Portrait Layout
Portrait Layout When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. -
Page 22: Attaching And Removing The Lg Logo Bracket
LG Logo Bracket to the bottom rear of the monitor. LG Logo Bracket After removing the screw, remove the LG Logo Bracket. When re-attaching the LG Logo Bracket, repeat the process in reverse order. - Page 23 LG Logo Bracket to the bottom rear of the monitor. After removing the screw, remove the LG Logo Bracket. Attach the LG Logo Bracket with a screw, aligning it with the hole on the right side.
-
Page 24: Installing On A Wall
Screws which are longer than standard length may damage the inside of the monitor. A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable for any accidents related to the use of non-standard screws. - Page 25 Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock. • If you install the monitor on a ceiling or slanted wall, it may fall and result in injury. Use an authorized LG wall mount and contact your local dealer or qualified personnel to assist with the installation.
-
Page 26: Remote Control
REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. - Page 27 Selects the Picture Mode. Activates the Launcher. Enters the White Balance menu. Accesses the main menus or saves your input and exit menus. SuperSign menu key. Navigation Buttons Scrolls through menus or options. Selects menus or options and confirms your input. Allows you to move back one step in the user interaction function.
-
Page 28: Making Connections
MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. - Page 29 NOTE • For the best image quality, using the monitor with HDMI connection is recommended. • To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. •...
-
Page 30: Using The Input List
Using the Input List → • HDMI1 → HDMI2 → OPS/DVI-D → DISPLAYPORT... -
Page 31: Troubleshooting
TROUBLESHOOTING No image is displayed. Problem Action Is the product power cord connected? • Check if the power cord is correctly plugged into the power outlet. Does the “Invalid Format” message • The signal from the PC (Graphics card) is out of the vertical or appear? horizontal frequency range of the product. - Page 32 After-image appears on the product. Problem Action After-image appears when the product is • If you use a fixed image for a long time, the pixels may be damaged. turned off. Use the screen-saver function. • When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking.
- Page 33 CAUTION • Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image.
-
Page 34: Product Specifications
PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution... - Page 35 49UH5C LCD screen Pixel pitch 0.27963 mm (H) x 0.27963 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 1.2 A Power consumption On Mode: 102 W (Typ.) Sleep Mode (DVI-D, HDMI1, HDMI2): ≤ 0.5 W Sleep Mode (DisplayPort): ≤ 0.5 W Off Mode: ≤...
- Page 36 Wireless module(LGSBW41)Specifications Wireless LAN (IEEE 802.11a/b/g/n) Frequency range (MHz) Output power (Max.) 2400 to 2483.5 16 dBm 5150 to 5250 16 dBm 5725 to 5850 (Not for EU) 11.5 dBm Bluetooth Frequency range (MHz) Output power (Max.) 2400 to 2483.5 10 dBm •...
- Page 37 HDMI/ DVI-D/ DisplayPort/ OPS (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark 800 x 600 37.879 60.317 1024 x 768 48.363 1280 x 720 44.772 59.855 1366 x 768 47.7 1280 x 1024 63.981 60.02 1680 x 1050 65.29 59.954 1920 x 1080...
- Page 38 Multi-screen (PC) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark 1280 x 720 44.772 59.855 1920 x 1080 67.5 HDMI1/2, DisplayPort PIP 3840 x 2160 67.5 (Main) Multi-screen (DTV) Support mode Resolution Horizontal frequency (kHz) Vertical frequency (Hz) Remark 720/50P 37.5...
- Page 39 ENERGY STAR® is a set of power- saving guidelines issued by the U.S.Environmental Protection Agency (EPA). As an ENERGY STAR® Partner LGE U. S. A., Inc. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR®...