Page 1
Tumble dryer WP31G200IN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 9 Programmes ....... 24 1.1 General information.... 4 9.1 Automatic programmes.... 24 1.2 Intended use....... 4 9.2 Timed programmes .... 25 1.3 Restriction on user group... 4 10 Accessories...... 26 1.4 Safe installation ...... 5 1.5 Safe use ........ 7 11 Laundry........
Page 3
16 Cleaning and servicing .... 34 16.1 Tips on cleaning and care .. 34 16.2 Base unit ........ 34 16.3 Moisture sensor...... 36 17 Troubleshooting....... 38 18 Transportation, storage and disposal ........ 42 18.1 Preparing the appliance for transportation ...... 42 18.2 Disposing of old appliance .. 42 19 Customer Service.....
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶...
Page 6
en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. ▶ Do not stand on or climb onto the appliance. The appliance may tip over if you sit on or lean against the open door.
Page 10
en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-...
en Installation and connection Check the appliance for visible After drying, clean the fluff filter damage. → Page 28. Open the door. a If the fluff filter is dirty, this reduces Remove any accessories from the the air flow in the appliance, ex- drum.
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-...
en Installation and connection 4.4 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level. All appliance feet must stand firmly on the ground.
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Maintenance flap on the base unit → Page 34 Fluff filter → Page 28...
en Familiarising yourself with your appliance 5.2 Wool basket Securing foot Wool basket Insert Tab for securing in the hook 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 24 Programme selector → Page 27...
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 25 Recommended The maximum load capacity for the selec-...
en Display Display Designation Description Dryness level: Iron The dryness level is activated. → "Buttons", Page 21 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 21 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 20 Plus Dryness level ad- The adjusted dryness level is activated.
Page 19
Display en Display Designation Description End of pro- Programme status gramme Example...
Page 20
en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Pause ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3s ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
Page 21
Buttons en Button Selection Description Cupboard Dry ¡ Cupboard Dry ¡ Selecting Cupboard Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 23 ¡...
Page 22
en Buttons Button Selection Description Ready In ¡ Programme end time ¡ Set the programme end time. ¡ Programme duration The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Dry Multi-layered, thick laundry The laundry is dry. Plus that does not dry readily.
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) Shirts 15 min Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. Once the laundry is dry, iron it or hang it up.
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 43. Order number Connection kit To save space, stack the WZ11410 appliance on a suitable washing machine of the same width and depth and that is from the...
Laundry en 12.2 Setting a programme 11 Laundry Turn the programme selector and set the required programme. 11.1 Preparing the laundry → "Programmes", Page 24 If required, adjust the programme ATTENTION! settings. Objects remaining in the laundry may damage the laundry and the drum. 12.3 Loading laundry Remove all items from any pock- ▶...
en operation The cooling process starts auto- Requirements matically after approximately 30 ¡ The display shows the following seconds and cools down the laun- after drying: "End" dry while the drum is rotating. If ¡ or the display shows the following you want to avoid or cancel the during operation: ...
operation en Open the fluff filter. Close the fluff filter. Remove the fluff. Insert the fluff filter. Clean the fluff filter thoroughly un- Close the door. der warm, running water and then dry it off. 12.10 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning.
en Childproof lock Pull out the condensation con- Inserting the condensation tainer, keeping it level. container Push the condensation container ▶ in as far as it will go. Empty the condensation container. 13 Childproof lock Secure your appliance against being operated unintentionally using the controls.
Wool basket en 14.2 Starting a programme 14 Wool basket with the wool basket Use the wool basket to gently dry ATTENTION! delicate fabrics, soft toys or sports If items of laundry in the wool basket shoes in a stationary position. touch the rotating drum or the ribs of Note: You can order this optional the drum, the laundry may cause ma- → "Accessories", Page 26 from our...
Basic settings en 15 Basic settings You can configure the basic settings for your appliance to meet your needs. 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
en Cleaning and servicing 15.2 Changing the basic set- nothing but water and a damp tings cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately.
Page 35
Cleaning and servicing en Open the lever for the heat ex- Clean the heat exchanger cover changer cover. under running water and dry it. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Pull out the heat exchanger hori- zontally.
en Cleaning and servicing Clean the opening with a soft, Insert the heat exchanger cover by damp cloth. the handle. Slide the heat exchanger in hori- Close the lever for the heat ex- zontally as far as it will go. changer. Ensure that the heat exchanger is Close the maintenance flap.
Page 37
Cleaning and servicing en ance changes the duration of the Note: If you do not clean the appli- automatic programme depending on ance as described, the appliance's the residual moisture in the laundry. functionality may be impaired. Open the door. Cleaning the moisture sensor Clean the moisture sensor with a Over time, residue from limescale, sponge.
en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 39
Troubleshooting en Fault Cause and troubleshooting Creasing. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable programme for the type of fabric. Set the suitable programme for the type of fabric.
Page 40
en Troubleshooting Fault Cause and troubleshooting The programme does Press Start/Pause . ▶ not start. No programme set. → "Setting a programme", Page 27. → "Starting the programme", Page 27. The length of the pro- The programme operation is optimised electronically. gramme changes dur- This may change the programme duration. ing the drying cycle.
Page 41
Troubleshooting en Fault Cause and troubleshooting The laundry is too Unsuitable programme for the type of fabric. damp. Set a timed programme for the subsequent drying. ▶ → "Programmes", Page 24 There has been a power cut. Check whether the lighting in your kitchen or other ▶...
en Transportation, storage and disposal 18.2 Disposing of old appli- 18 Transportation, stor- ance age and disposal Valuable raw materials can be re- used by recycling. 18.1 Preparing the appliance for transportation WARNING Risk of harm to health! Tip: The appliance may contain re- Children can lock themselves in the sidual water, which may drip out of it appliance, thereby putting their lives when transported.
Helpline no.: 1800-209-1850 not be opened by the (Monday to Saturday – 8 am to user himself/herself, 8 pm) but only by authorized Email ID: service.in@siemens- service personnel. home.BSH-Group.com ¡ The product is not meant for re-sale to any unauthorized agencies/scrap deal-...
en Customer Service 19.1 Product number (E-Nr.) and production number (FD) You can find the product number (E- Nr.) and the production number (FD) on the appliance's rating plate. Depending on the model, the rating plate is located: ¡ On the inside of the door. ¡...
Consumption values en 20 Consumption values The specified values are indicative amount of laundry being loaded, en- only and were determined in accord- vironmental conditions and the activ- ance with the applicable standard ation of additional functions. IEC61121. The expected programme dura- The actual values may deviate from tion/"Ready in"...
Page 46
en Technical data Mains voltage 220-240 V, Ambient temper- ¡ Minimum: 50 Hz ature 5 °C ¡ Maximum: Minimum in- 35 °C stallation protec- tion Length of the 145 cm power cord Nominal power 2800 W...
Page 48
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001620259* 9001620259 (021028)