Page 1
WQ45G209GR Tumble dryer EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶...
Page 6
en Safety If the power cord is too short and a longer one is not available, ▶ please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own.
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous.
Page 8
en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. Keep the area around the appliance clean during operation. ▶ WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
Safety en Rinse the laundry thoroughly with warm water and detergent be- ▶ fore drying it in the machine. Do not use the appliance if industrial chemicals have been used ▶ to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite.
Page 10
en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. Only use the manufacturer's original spare parts and original ac- ▶ cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-...
en Installation and connection After drying, clean the fluff filter 4.2 Scope of delivery → Page 30. After unpacking all parts, check for a If the fluff filter is dirty, this reduces any damage in transit and complete- the air flow in the appliance, ex- ness of the delivery.
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-...
Page 14
en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes Operate this appliance using the ¡ water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 32.
Page 15
Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 32. → Page 32. Connect the appliance to the water outlet.
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 28 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level.
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Condensation container → Page 32 Fluff filter → Page 30...
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 29 Display → Page 19 Buttons → Page 22...
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 1:25 The timed programme is set. → "Timed programmes", Page 27 Recommendation for the maximum load capacity for the selected program in kg.
Page 20
en Display Display Description The Cupboard Dry dryness level is activated. → "Buttons", Page 23 The Cupboard Dry Plus dryness level is activated. → "Buttons", Page 22 The adjusted dryness level is activated. → "Dryness level", Page 25 The crease-reduction function is activated. → "Buttons", Page 23 Gentle drying is activated for delicate fabrics. → "Buttons", Page 23 4.5 kg Half load is activated.
Page 21
Display en Display Description Pause Programme status Program end Programme status Example...
en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Έναρξη/Παύση Start Start, cancel or pause ¡ the programme. Cancel ¡ Pause ¡ Activate Activate or deactivate the ¡ childproof lock. Deactivate ¡ Disable the control panel to prevent unwanted or accidental operation.
Page 23
Buttons en Button Selection Description Για φύλαξη Για φύλαξη Selecting Για ¡ ¡ φύλαξη activates the ¡ dryness level. ¡ The dryness level ¡ defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 The dryness level can ¡...
Page 24
en Buttons Button Selection Description Λήξη σε Programme end time Set the programme ¡ ¡ end time. Programme duration ¡ The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Για φύλαξη + Multi-layered, thick laundry The laundry is dry. that does not dry readily.
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors Select the dryness level according ¡ measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle.
Programmes en Programme Description Max. load (kg) Μαξιλάρια Dry pillows stuffed with down or synthetic One pillow fibres. Note: Once the programme has ended, shake the pillows to distribute the stuffing and eliminate any pockets of moisture. Πουκάμισα Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics.
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 46. Order number Connection kit To save space, stack the WZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
Laundry en Turn the programme selector and 11 Laundry set the required programme. → "Programmes", Page 26 If required, adjust the programme 11.1 Preparing the laundry settings. ATTENTION! 12.3 Loading laundry Objects remaining in the laundry may damage the laundry and the drum. Note: To prevent creasing, note the Remove all items from any pock- ▶...
en operation you want to avoid or cancel the Requirements cooling process, open the door. The display shows the following ¡ after drying: "End" → "Display", Page 20 or the display shows the following ¡ Open the door. during operation: Add or remove laundry. Open the door.
Page 31
operation en Disconnect the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and then dry them off. Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Close the door.
en operation Empty the condensation container. 12.10 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. Note: Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regu- larly empty the condensation con-...
Childproof lock en 13 Childproof lock Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two ▶ buttons for approx. 3 seconds. The display shows The control elements are locked. The childproof lock remains active even after the appliance has been switched off and in the event of a power cut.
en Basic settings 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
Appliance care en Requirements 14.2 Changing the basic set- The drum is empty. ¡ tings The appliance is switched off. ¡ Set the programme selector to po- Clean the fluff filter. sition 1. → "Cleaning the fluff filter", Page 30 Pull out the condensation con- tainer horizontally and empty it.
en Appliance care Clean the filter in the condensation peatedly until you have run the ba- container. sic appliance care programme through to the end. 15.2 Calling up the appliance Requirements care programme The appliance care programme is ¡ ready. Requirement: The appliance care → "Preparing for appliance care", programme is ready.
Appliance care en ATTENTION! The functionality of 15.4 Running the intensive the appliance may be impaired if appliance care pro- you use the wrong quantity of fab- gramme ric softener, detergent, care product or cleaning agent. You can run the intensive appliance Follow the dosage recommenda- ▶...
en Cleaning and servicing The appliance care programme 16.2 Moisture sensor continues. The moisture sensor in this appliance "End" appears on the display and measures how damp the laundry is a signal tone sounds once the ap- during the drying cycle. The appli- pliance care programme has ance changes the duration of the ended.
Cleaning and servicing en Remove the filter. 16.3 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied.
en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 41
Troubleshooting en Fault Cause and troubleshooting Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶ Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 26. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
Page 42
en Troubleshooting Fault Cause and troubleshooting Condensation in the Ensure that the water drain hose is connected cor- ▶ condensation tank rectly. even though the water → "Connecting the water drain hose", Page 14 drain hose is connec- ted. The programme does Childproof lock is activated. not start.
Page 43
Troubleshooting en Fault Cause and troubleshooting Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
Page 44
en Troubleshooting Fault Cause and troubleshooting Odours have formed Stubborn dirt in the appliance or an extended appli- in the appliance. ance downtime of more than one month. Run the intensive appliance care programme. ▶ → "Appliance care", Page 35...
Transportation, storage and disposal en Empty the condensation container 18 Transportation, stor- → Page 32. age and disposal Insert the condensation container → Page 32. Disconnect the appliance's mains 18.1 Preparing the appliance plug from the power supply. for transportation The appliance is now ready to be transported.
en Customer Service Information about current disposal 19.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate.
Consumption values en 20 Consumption values The Βαμβακερά eco pro- The actual values may deviate from gramme (denoted by the arrow sym- the indicated values depending on bol) is suitable for drying cotton laun- the type of fabric, composition of dry with a normal dampness level, laundry to be dried, residual moisture and is the most efficient programme in the fabric, set degree of dryness,...
Page 48
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Βαμβακερά + Για 12.0 1400 1:47 1.19 σιδέρωμα Βαμβακερά + Για 12.0 1400 1:12 0.70...
Technical data en You can find more information about identifier is made up of the charac- your model online at https:// ters before the slash in the product eprel.ec.europa.eu/ . This web ad- number (E-Nr.) on the rating plate. Al- dress is linked to the official EU ternatively, you can also find the EPREL product database.
Page 52
EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...