Table of Contents
Advertisement
Fault messages
Problem
The display shows a
fault number that is not
listed below.
Fault :
The drain pump may
still be running, even
with the door open.
All of the programme
selection indicator
lights are flashing.
Fault number ap-
pears in the time dis-
play.
Cause and remedy
There may be a technical fault.
Switch the dishwasher off with the button.
Switch the dishwasher back on after a few
seconds.
Restart the desired programme.
If the indicator lights flash again, there is a technical
fault.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
The Waterproof system has reacted.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
Circulation pump fault.
Switch the dishwasher off.
Switch the dishwasher back on.
Restart the desired programme.
If the fault message appears again, there is a tech-
nical fault.
Switch the dishwasher off.
Close the stopcock.
Call the Miele Customer Service Department.
Problem solving guide
73
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
