Table of Contents
Related Manuals for Siemens WQ56A4D10W
Summary of Contents for Siemens WQ56A4D10W
- Page 1 Tumble dryer WQ56A4D10W User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 8 Dryness level...... 25 1.1 General information.... 4 8.1 Changing the dryness level.. 25 1.2 Intended use....... 4 8.2 Adjusting the dryness level .. 25 1.3 Restriction on user group... 4 9 Programmes ....... - Page 3 14.2 Starting a programme with 18.3 Moisture sensor...... 48 the wool basket ...... 35 18.4 Condensation container fil- 14.3 Examples of how to use the ter ........... 49 wool basket ...... 35 19 Troubleshooting....... 51 15 Home Connect ...... 36 20 Transportation, storage and 15.1 Setting up the Home Con- disposal ........
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
-
Page 9: Safe Cleaning And Maintenance
Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. - Page 10 en Safety An ingress of moisture can cause an electric shock. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories.
-
Page 11: Preventing Material Damage
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-... -
Page 12: Energy Saving Mode
en Installation and connection Open the appliance door. After drying, clean the fluff filter → "Basic operation", Page 30 → Page 31. Remove any accessories from the a If the fluff filter is dirty, this reduces drum. the air flow in the appliance, ex- Close the appliance door. tends the programme duration and increases energy consumption. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Included with Description Installation loca- Requirements the appliance tion Wool basket with In a washer-dryer Only use the ori- insert stack ginal connection set from the → "Wool basket", dryer manufac- Page 34 turer when set- ting up this appli- 4.3 Requirements for the in- ance in a stallation location... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 33.
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 34. → Page 33. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 29 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Maintenance flap on the base unit → Page 47 Fluff filter → Page 31... -
Page 18: Wool Basket
en Familiarising yourself with your appliance 5.2 Wool basket Securing foot Wool basket Insert Tab for securing in the hook 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. 5.4 Operating logic Programmes → Page 26 Programme selector... - Page 19 Familiarising yourself with your appliance en tivate the activated settings by re- peatedly pressing on the relevant buttons on the display. ATTENTION! Pressing on the display with force may cause damage. Do not apply heavy pressure on ▶ the display. Do not press on the display using ▶...
-
Page 20: Display
en Display 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 00:00 Timed programme The timed programme is set. → "Timed programmes", Page 27 结束... -
Page 21: Dryness Level
Display en Display Designation Description Cooling process The laundry is cooled while the drum is rotating, in order to avoid damage to the laundry. The process can be cancelled by opening the door. Note: Do not change the programme. Automatic self- The automatic self-cleaning function rinses cleaning the appliance's heat exchanger. - Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause (mains switch) ¡ Switch on Switch the appliance on or off. ¡ Switch off ¡...
- Page 23 Buttons en Button Selection Description ¡ Selecting ¡ 超干储藏 超干储藏 超干储 藏 activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
- Page 24 en Buttons Button Selection Description 60分钟 ¡ Activate Activate or deactivate the crease-reduction func- ¡ Deactivate tion. Once the programme has ended, the drum moves the laundry at regular intervals for 60 minutes to prevent creasing. 120分钟 ¡ Activate Activate or deactivate the crease-reduction func- ¡...
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. 超干储藏 that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) Sports Dry weatherproof and outdoor clothing with a membrane coating and water-repel- lent fabrics. Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. - Page 28 en Programmes Programme Description Max. load (kg) Time Dry Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Quick Dry Dry all types of fabric except for wool and silk.
-
Page 29: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 57. Order number Connection kit with pull- To save space, stack the WZ2742S out worktop appliance on a suitable washing machine of the same width and depth... -
Page 30: Basic Operation
en operation ¡ Load the laundry unfolded into the Note: The programme settings are drum not saved permanently for the pro- ¡ Spin the laundry before drying gramme. ¡ Dry woollen items, sports shoes 12.4 Saving the programme and soft toys in the wool basket → "Wool basket", Page 34 settings You can save your individual pro-... -
Page 31: Adding Laundry
operation en a The display shows the programme 12.11 Fluff filter duration or the "Ready in" time. During drying, fluff from the laundry is a After the programme has ended, collected in the fluff filter. The fluff fil- the display shows: "End" . ter protects the appliance from fluff. - Page 32 en operation Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter. then dry them off. Open the two fluff filters. Close the two fluff filters and put them together.
-
Page 33: Condensation Container
operation en Insert the two-part fluff filter. Pull out the condensation con- tainer, keeping it level. Close the door. Empty the condensation container. 12.12 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. -
Page 34: Childproof Lock
en Childproof lock Inserting the condensation 14 Wool basket container Push the condensation container Use the wool basket to gently dry ▶ in as far as it will go. delicate fabrics, soft toys or sports shoes in a stationary position. Note: You can order this optional → "Accessories", Page 29 from our customer service. -
Page 35: Starting A Programme With The Wool Basket
Wool basket en 14.2 Starting a programme Laundry item Programme duration in with the wool basket hours:minutes ATTENTION! Thin woollen Approx. 1:20 If items of laundry in the wool basket pullover touch the rotating drum or the ribs of Thick woollen Approx. 1:30 - the drum, the laundry may cause ma- pullover 3:00... - Page 36 Pullover operating status. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on siemens-home.bsh- group.cn. Sports shoes Lift the tongues The Home Connect services are not of the shoes.
-
Page 37: Home Connect
Home Connect en Follow the instructions in the 15.1 Setting up the Home Connect app. Home Connect app 15.3 Activating Wi-Fi on the Install the Home Connect app on the mobile device. appliance Note: When Wi-Fi is activated, the en- ergy consumption increases in com- parison to the values specified in the consumption value table. -
Page 38: Remote Start
en Home Connect a If End is shown on the display, the appliance will transmit the following network settings are reset. types of data to the Home Connect server (initial registration): ¡ Unique appliance identification 15.6 Remote start (consisting of appliance codes as Enable the appliance for remote start well as the MAC address of the via the Home Connect app. -
Page 39: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Symbol Value Description End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 40: Changing The Basic Set- Tings
en Appliance care Pull out the condensation con- 16.2 Changing the basic set- tainer, keeping it level. tings To call up the basic settings, press 静音 . a The display shows the selected ba- sic setting and the current value. Select the required basic setting. To change the value, press To save the changes, switch off the appliance. -
Page 41: Starting The Appliance Care Programme
Appliance care en Remove the stopper from the re- 17.3 Starting the appliance cess in the condensation con- care programme tainer. Requirements ¡ The appliance is ready to run the appliance care programme. → "Preparing the appliance for the appliance care programme ", Page 40. -
Page 42: Running The Basic Appli- Ance Care Programme On The Appliance
en Appliance care Insert the condensation container 17.4 Running the basic appli- so that it locks into place. ance care programme on the appliance To remove any light soiling, you can run a basic appliance care pro- gramme. Note: After a certain period of use, the appliance automatically recom- mends that you run the basic appli- ance care programme. -
Page 43: Preparing The Appliance For The Intensive Appliance Care Programme
Appliance care en Empty the condensation container 17.5 Preparing the appliance → Page 33. for the intensive appli- ance care programme If the appliance is not used for more than one month, stubborn dirt or odours may occur. To remove this, you can run an intensive appliance care programme. -
Page 44: Running The Intensive Appli- Ance Care Programme
en Appliance care Insert the condensation container 17.6 Running the intensive so that it locks into place. appliance care pro- gramme Pull out the condensation con- tainer horizontally and empty it. Press . The appliance care programme starts and an audible signal sounds. After around 3 hours, the appli- ance pauses the appliance care Pour a bottle of the original appli-... -
Page 45: Ending The Intensive Appli- Ance Care Programme
Appliance care en Add approx. 1 ½ litres of hot tap 17.7 Ending the intensive ap- water into the condensation con- pliance care programme tainer. Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. Hold the full condensation con- tainer level so that no liquid spills out. -
Page 46: Cleaning And Servicing
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on siemens-home.bsh- group.cn. 18.1 Tips on cleaning and care Wipe down the... -
Page 47: Base Unit
Cleaning and servicing en Pull out the heat exchanger cover 18.2 Base unit by the handle. The base unit is the accessible area at the bottom of the appliance in which you will find the heat ex- changer. Opening the base unit Requirements ¡... -
Page 48: Moisture Sensor
en Cleaning and servicing Clean the insert under running wa- Insert the heat exchanger cover by ter and dry it off. the handle. Clean the opening with a soft, Close the lever for the heat ex- damp cloth. changer. Slide the insert in horizontally as Close the maintenance flap. -
Page 49: Condensation Container Filter
Cleaning and servicing en ance changes the duration of the 18.4 Condensation container automatic programme depending on filter the residual moisture in the laundry. During drying, fluff from the laundry Cleaning the moisture sensor gets into the condensation. The filter Over time, residue from limescale, in the condensation container pro- detergents and care products can tects the appliance from fluff. - Page 50 en Cleaning and servicing Slide in the filter as far as it will go. Insert the condensation container. → "Inserting the condensation con- tainer", Page 34...
-
Page 51: Troubleshooting
Troubleshooting en 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 52 en Troubleshooting Fault Cause and troubleshooting Home Connect is not Different causes are possible. working properly. Go to www.home-connect.cn. ▶ No connection to the Wi-Fi is switched off. home network. Activating Wi-Fi on the appliance. ▶ → "Activating Wi-Fi on the appliance", Page 37. Wi-Fi is activated but a connection to your home net- work cannot be established.
- Page 53 Troubleshooting en Fault Cause and troubleshooting and programme Rinse the water drain hose with tap water. ▶ terminated. The filter for the condensation tank is soiled. → "Clean the filter for the condensation tank.", ▶ Page 49. Foreign object is located in the base unit → "Opening the base unit", Page 47.
- Page 54 en Troubleshooting Fault Cause and troubleshooting The drying time is too The ambient temperature is lower than 15 °C. long. Ensure that the ambient temperature is above 15 ▶ °C. Insufficient air circulation at the appliance's installation location. Ventilate the appliance's installation location. ▶...
- Page 55 Troubleshooting en Fault Cause and troubleshooting The laundry is too Observe the maximum load capacity of the ▶ damp. → "Programmes", Page 26. After the end of the programme, warm laundry feels damper than it actually is. Remove the laundry from the drum as soon as the drying programme has finished.
-
Page 56: Transportation, Storage And Disposal
en Transportation, storage and disposal Empty the condensation container 20 Transportation, stor- → Page 33. age and disposal Insert the condensation container → Page 34. Disconnect the appliance's mains 20.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 57: Customer Service
Customer Service en Information about current disposal ¡ On the rear of the appliance. methods are available from your Make a note of your appliance's de- specialist dealer or local authority. tails and the Customer Service tele- phone number to find them again This appliance is la- quickly. - Page 58 en Applicable standard Safety – Part 1: GB 17625.1 Electromagnetic General require- compatibility – ments Limits – Limits for harmonic cur- GB 4343.1 Electromagnetic rent emissions compatibility re- (equipment input quirements for current ≤16 A household appli- per phase) ances, electric tools and similar GB 4706.20 Safety of house-...
- Page 60 BSH Hausgeräte GmbH Carl-Wery-Straße 34, 81739 München, GERMANY 总经销商：博西家用电器（中国）有限公司 地址： 中国江苏省南京市鼓楼区清江南路18号3幢 客户服务热线：400 889 9999 客户服务电子邮箱： careline.china@bshg.com siemens-home.bsh-group.cn Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001718072* 9001718072 (021003)