Table of Contents
Advertisement
Installing the palm-rest and keyboard assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
Place the palm-rest and keyboard assembly on a flat surface.
NOTE:
When replacing the palm-rest and keyboard assembly, the solid-state screw mount must be transferred from the old
palm-rest and keyboard assembly to the replacement palm-rest and keyboard assembly.
Next steps
1. Install the
power-button
2. Install the
system
board.
NOTE:
The system board can be installed as an assembly with the fan and heat-sink assembly, ethernet and audio
board, and USB board attached.
3. Install the
power adapter
4. Install the speakers.
5. Install the
memory
modules.
6. Install the
wireless
card.
7. Install the
solid-state
8. Install the
display
assembly.
9. Install the
keboard-controller
10. Install the
touchpad
11. Install the
rear
cover.
12. Install the battery.
13. Install the
base
cover.
14. Follow the procedure in
assembly.
port.
drive.
board.
After working inside your
computer.
Removing and installing Field Replaceable Units (FRUs)
77
Advertisement
Table of Contents
