Table of Contents
Advertisement
Next steps
1. Install the
assembly-inner
2. Install the battery.
3. Install the
heat sink (discrete GPU)
4. Install the
M.2 2230 solid-state drive in Slot
5. Install the
M.2 2230
or
6. Install the
memory
modules.
7. Install the
WLAN
card.
8. Install the
4G WWAN card
9. Install the
base
cover.
10. Install the
SIM
card.
11. Follow the procedure in
Power button
Removing the power button
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
4G WWAN card
6. Remove the
WLAN
card.
7. Remove the
memory
modules.
8. Remove the
M.2 2230
9. Remove the
M.2 2230 solid-state drive from Slot
10. Remove the
heat sink (discrete GPU)
11. Remove the
assembly-inner
12. Remove the
system
board.
About this task
The following images indicate the location of the power button and provide a visual representation of the removal procedure.
90
Removing and installing Field Replaceable Units (FRUs)
frame.
or
heat sink (integrated
2, if applicable.
M.2 2280
solid-state drive in Slot 1, as applicable.
or
5G WWAN
card, as applicable.
After working inside your
Before working inside your
or
5G WWAN
card, as applicable.
or
M.2 2280
solid-state drive from Slot 1, as applicable.
or
heat sink (integrated
frame.
GPU), as applicable.
computer.
computer.
2, if applicable.
GPU), as applicable.
Advertisement
Table of Contents
