Table of Contents
Advertisement
Cleaning and Transporting Your Product
See these sections if you need to clean or transport your product.
Cleaning Your Product
Cleaning Inside Your Product
Replacing the Rollers
Transporting Your Product
Cleaning Your Product
To keep your product working at its best, you should clean it several times a year.
Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the product or let water get inside it. Do not open the product's
outer case.
1. Turn off the scanner and unplug the AC adapter.
2. Disconnect any connected cables.
3. Clean the outer case with a soft, dry cloth. Do not use liquid or chemical cleansers.
Note: If the outer case still requires additional cleaning, use a slightly damp cloth to wipe the outer
case. Then wipe the case with a soft, dry cloth.
Parent topic:
Cleaning Inside Your Product
Clean your product regularly to make sure that no dust builds up on the glass scanning surfaces. Dust
can cause spots or lines in your scanned images. Clean the inside of the product every 5,000 scans. You
can check the latest number of scans and set cleaning time notifications and alerts in the Epson Scan 2
Utility. By default, a notification is sent after every 5,000 scans.
Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the product or let water get inside it. Do not open the product's
outer case.
Cleaning and Transporting Your Product
147
Hide quick links:
Advertisement
Table of Contents
