hit counter script
Husqvarna CEORA Operator's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. CEORA
  6. Operator's manual

Husqvarna CEORA Operator's Manual

Hide thumbs Also See for CEORA:
Table of Contents

Advertisement

Quick Links

Operator's manual
™
HUSQVARNA CEORA
Read the operator's manual carefully and make sure that you
EN, English
understand the instructions before you use the product.

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna CEORA

Summary of Contents for Husqvarna CEORA

  • Page 1 Operator's manual ™ HUSQVARNA CEORA Read the operator's manual carefully and make sure that you EN, English understand the instructions before you use the product.

  • Page 2: Table Of Contents

    2.3 System description..........6 5.10 To charge the battery........28 2.4 System overview........... 7 5.11 To release the wheel brakes and move ™ 2.5 Product overview drive unit, CEORA the product..............28 544/546 EPOS............8 6 Maintenance ™ 2.6 Product overview cutting deck, CEORA RZ 43L/43M..............

  • Page 3: Safety

    To prevent damage to the product and accidents to the product, refer to vehicles and persons, do not install work areas and • If there is a risk of thunderstorm, Husqvarna transport paths across public pathways. recommends that the mains cable to the charging •...

  • Page 4: Safety Instructions For Installation

    Refer to noise emission values, refer to Technical data on on page 28 . Husqvarna recommends to set the page 49 . product to operate when the work area has no activity. The product can cause injury to animals at •...

  • Page 5: To Lift And Move The Product

    not dismantle, open the battery or use any type of electrical/mechanical abuse. Avoid storage in direct sunlight. 1.7 To lift and move the product WARNING: The product must be set to OFF before you lift the product. • To safely move the product from or in the work area, lift it manually or operate it with appDrive.

  • Page 6: Introduction

    2.2 Product description correction data to the robotic lawn mower to get an accurate position of the robotic lawn mower. The virtual Note: work area for the product is made in the Husqvarna Husqvarna regularly updates the appearance ™ Fleet Services app.

  • Page 7: System Overview

    2.4 System overview Satellites Work area Satellite signals Mobile device Reference station 10. Docking point Correction data 11. Transport path Charging station 12. Robotic lawn mower Virtual boundary 13. Maintenance point Stay-out zone Not included. Not included. 1691 - 006 - 09.01.2023 Introduction - 7...

  • Page 8: Product Overview Drive Unit, Ceora

    ™ 2.5 Product overview drive unit, CEORA 544/546 EPOS Drive unit (DU) Drive wheels Rating plate drive unit Rear bumper Hatch Rear handles Drive unit body 10. Rear safety lights USB outlet for service tool 11. Active wheel brush kit Control panel ™...

  • Page 9: Product Overview Charging Station, Ceora ™ Cs4

    15. Service wheels Front safety lights 16. Blades and screws Charging plates Ultrasonic sensors ™ 2.7 Product overview charging station, CEORA Rating plate of the charging station Coupling LED indicators of the charging station Support plates Contact plates Support plate for soft surface Baseplates 10.

  • Page 10: Control Panel Overview

    2.8 Control panel overview ON/OFF button Play button START button Maintenance point button ® Bluetooth button STOP button LED indicator Park button 2.9 LED indicator on the product The LED indicator on the control panel of the product shows the current product status: LED indicator light Product status Constant green...

  • Page 11: Symbols On The Product

    Firmware installation is in progress. Flashes white New firmware must be installed. There is more information on www.husqvarna.com. Speak to your approved servicing dealer for more information. 2.10 Symbols on the product The chassis contains components which are sensitive to electrostatic discharge These symbols can be found on the product.

  • Page 12: General Manual Instructions

    • Text written in the Automower ® Connect app, Husqvarna Fleet ™ Services app or is a reference to another section in the Operator’s manual. • Text written in bold is one of the buttons on the product or in appDrive.

  • Page 13: Installation

    3.4 To examine where to put the Note: reference station Refer to www.husqvarna.com for more information about installation. Read and understand the instructions about where to put the reference station. Refer to the Operator's manual for the reference station.
  • Page 14 Put the charging station on a flat surface, not on docking point. gravel. • Husqvarna recommends to install the charging • If the product must not operate in a part of the station on a hard surface, such as concrete or docking area, put a protective wall that is minimum equivalent.

  • Page 15: To Examine Where To Install The Objects On The Map

    3.6.1 To examine where to install the objects on the map for good satellite coverage When the product operates it must have unimpeded sky view to use the satellite signals for navigation. • Make sure that 90° section of the sky is unimpeded.
  • Page 16 • For L-shaped objects higher than 1 m / 3.3 ft, install the virtual boundary at a minimum distance (A) of 1.5 m / 5 ft. from it. • To install virtual boundaries in an area with an U- shaped object higher than 1 m / 3.3 ft, make sure that the distance (B) is minimum 6 m / 20 ft.

  • Page 17: Installation Of The Product

    Install the reference station. Refer to the Operator's manual for the reference station. ™ Install the Husqvarna Fleet Services app and the ® Automower Connect app on your mobile device. ™ Husqvarna Fleet Services on page 19 . Refer to Do a pairing operation of the product and the ™...
  • Page 18 13. Install the center top cover on the cutting deck. Align the shaft with the hole in the frame. 14. Close the hatch. 3.7.4 To remove the cutting deck To set the Set the drive unit to OFF. Refer to product to OFF on page 28 .
  • Page 19 3.7.6 Installation of the reference station Install the reference station according to the instructions in the Operator's manual for the reference station. ™ 3.7.7 Husqvarna Fleet Services ™ Husqvarna Fleet Services is a cloud solution that gives the commercial fleet manager an overview of 1691 - 006 - 09.01.2023...
  • Page 20 ™ Fleet Services is available as a web service and as an Transport path (C) • ™ app. When you use the Husqvarna Fleet Services Charging station (D) • ® you will be redirected to the Automower Connect app. Maintenance point (E) •...
  • Page 21 For each work area and the related stay-out zones and transport path the total maximum number of waypoints are 800. Husqvarna recommends to add maximum 1000 waypoints for the complete installation of the map. You can adjust the positions of the waypoints in the app after the installation of the map.
  • Page 22 • max 1 cm / 0.4” Note: Walk 2-3 m / 6.5-9.8 ft. behind the product • Add the waypoint at the outer corner to install the when you operate the product with appDrive. virtual boundary around a corner. To make a work area Minimum 3 waypoints are necessary to make a work area.
  • Page 23 • Operate the product counterclockwise around the • Save the maintenance point to automatically boundary of the stay-out zone. connect the last waypoint to the docking point. • Add waypoints on the map. Add the waypoints • Set the corridor width (A) for the maintenance minimum 3 cm / 1 in.

  • Page 24: Settings

    The cutting height is set individually for each work area. ™ ™ Area CEORA CEORA EPOS EPOS 4.3 Pattern 5 000 m 1.25 acre 10 000 m...

  • Page 25: Accessories

    There is a possibility to set how long the alarm signal an error. should last. A setting between 1 and 10 minutes is Note: possible. Husqvarna recommends to use the headlights at night time. 4.7.2.2 STOP button pressed If the alarm "STOP button pressed" is enabled, the 4.5.2 Avoid collisions with the mower house...

  • Page 26: Automower ® Connect (Bluetooth ® Only)

    4.7.2.3 Carried away Carried away is enabled, the product senses If the alarm unexpected motions, and the alarm goes off. 4.7.3 GeoFence GeoFence is a GPS-based theft protection that makes a virtual fence for the product. If the product is more than a set distance away from the center position the product will be disabled and an alarm will start.

  • Page 27: Operation

    Push the ON/OFF button for 3 seconds to set the product to ON. Note: ™ Open the Husqvarna Fleet Services app. Walk 2-3 m / 6.5-9.8 ft. behind the product when you operate the product with appDrive. Enter the PIN code.

  • Page 28: Operation Mode Park At Maintenance Point

    Refer Product to charging plates and contact plates in Push the STOP button. ™ overview charging station, CEORA CS4 on page Push the Maintenance point button. Push the START button. Make sure that the charging is in progress in the ™...
  • Page 29 Keep the STOP button pushed and push the product forward to move it. 1691 - 006 - 09.01.2023 Operation - 29...

  • Page 30: Maintenance

    6 Maintenance 6.1 Introduction - maintenance It is important that the blade disc rotates easily and that the edges of the blades are not damaged. The usual lifetime of the blades are 1 to 4 weeks. The conditions WARNING: Set the product to OFF that follow can increase or decrease the lifetime of the before you do maintenance on the product.
  • Page 31 Servicing Every Every Weekly third year year Drive unit Remove the wheel covers and clean the wheels. Refer to To clean the drive unit on page 33 . Examine if the cap for the USB outlet is attached correctly. Charge the battery fully before you put the product into storage. Refer to charge the battery on page 28 .

  • Page 32: To Put The Cutting Deck In Service Position

    Servicing Every Every Weekly third year year Examine and clean the airflow filter. Replace the airflow filter. Examine the charging cable and connector. Charging station Examine and polish the contact plates on the charging station. Examine the mains cable, power supply unit, charging cable and connectors. Open the charging station and replace the gasket.

  • Page 33: Clean The Product

    Close the hatch. 6.5 Clean the product 6.5.2 To clean the cutting deck and blade Husqvarna recommends to use a special cleaning and discs maintenance kit, available as an accessory. Speak to Examine the blade discs and blades weekly.
  • Page 34 WARNING: You must replace the screws when you replace the blades. The used screws can wear quickly and make the blade come loose, this can cause serious injury. Remove the blade disc. Replace worn or damaged blades for a safe operation. Clean the shaft and hub if it is dirty.

  • Page 35: Adjustment Of The Wheel Brushes

    Install 5 new blades and screws. Make sure that the blades can pivot freely. If the skid plate was removed, install the skid plate and the screw. Tightening torque 8 Nm. 6.7 Adjustment of the wheel brushes The wheel brushes must be adjusted if they are worn. Wheel brushes are available as accessory.

  • Page 36: Troubleshooting

    You can find all the troubleshooting messages in the . You can find more information on www.husqvarna.com. 7.2 Fault messages The fault messages in the table below are shown in the Husqvarna Fleet Services ™ app. Speak to your approved servicing dealer if the same message shows frequently.
  • Page 37 Message Cause Action No loop signal The mains cable is not connected. If the LED indicator on the charging sta- tion is out, it shows that there is no pow- er. Examine the power outlet connection and the residual-current device. Make sure that the mains cable is connected to the charging station.
  • Page 38 Message Cause Action Empty battery The product cannot find the charging sta- The product has no accurate position tion. and cannot find the charging station. There is an obstacle that prevents the product to find the charging station. The battery is at the end of its life cycle. Replace the battery.
  • Page 39 Message Cause Action Lifted The lift sensor was enabled because the Make sure that the body of the product product was lifted. can move freely around its chassis. Re- move or make a stay-out zone around objects that can cause the body of the product to be lifted.
  • Page 40 Restart the product. If the problem stays, speak to your authorized service center. Map problem There is no specified work area. Make a work area in the Husqvarna Fleet ™ To make a work Services app. Refer to area on page 22 .
  • Page 41 Message Cause Action Searching for satellites Weak satellite signal to the reference sta- The satellite signal is temporary weak. tion. The product will start to operate when the satellite signals are good. Examine the installation of the reference station. Refer to the Operator's manual for the Reference station.
  • Page 42 Message Cause Action Cutting deck not in correct The cutting deck is not attached correct- Make sure that the cutting deck is at- position tached correctly and that the lever is in the correct position. If the problem stays, speak to your authorized service center. The cutting deck is in service position.

  • Page 43: Information And Warning Messages

    For a fully functional installation, the indicator lamps in the charging station must show a solid or flashing green light. If another color shows, follow the troubleshooting guide below. There is more help on www.husqvarna.com. If you still need help, speak to your approved servicing dealer. Light...

  • Page 44: Symptoms

    7.5 Symptoms If the product does not operate correctly, refer to the symptoms table below. Symptoms Cause Action The product cannot go into The charging station is not put on a level Put the charging station on level surface. To examine where to put the the charging station.
  • Page 45 If a new firmware is available in the app, install it to make sure that you have the newest firmware. • Make sure that you have the new- est version of the Husqvarna Fleet ™ Services app and the Automow- ®...

  • Page 46: Transportation, Storage And Disposal

    The • Attach the product with 3 straps, one on the Husqvarna warranty is not applicable if you front handle and one on each side handle of the remove the warranty seal. product. The maximum force is 300 N for each strap.
  • Page 47 Disconnect the cable. Remove the 4 nuts. Fold the top of the chassis carefully. Remove the body of the product. Disconnect the 2 cables from the battery. Remove the 13 screws. Remove the 4 screws for the battery bracket. 1691 - 006 - 09.01.2023 Transportation, storage and disposal - 47...
  • Page 48 10. Remove the battery from the product. 48 - Transportation, storage and 1691 - 006 - 09.01.2023 disposal...

  • Page 49: Technical Data

    9 Technical data 9.1 Technical data ™ ™ System CEORA 544 EPOS CEORA 546 EPOS ™ ™ CEORA CEORA ™ ™ ™ ™ CEORA RZ 43L CEORA RZ 43M CEORA RZ 43L CEORA RZ 43M Dimensions, drive unit and cutting deck Length, cm/in.
  • Page 50 ™ ™ System CEORA 544 EPOS CEORA 546 EPOS ™ ™ CEORA CEORA ™ ™ ™ ™ CEORA RZ 43L CEORA RZ 43M CEORA RZ 43L CEORA RZ 43M Sound level perceived, dB Measured sound power noise level, dB (A)
  • Page 51 ™ ™ Cutting deck CEORA RZ 43L CEORA RZ 43M IP code IPX5 IPX5 ® ® Blades Automower standard blades, Automower standard blades, ® ® Automower Enhance HSS Automower Enhance HSS blades blades ™ Charging station CEORA Dimensions Length, cm/in.

  • Page 52: Registered Trademarks

    6 . 9.2 Registered trademarks ® Bluetooth Bluetooth SIG, inc. and any use of such word mark and logos are registered trademarks owned by marks by Husqvarna is under license. 52 - Technical data 1691 - 006 - 09.01.2023...

  • Page 53: Applicable To Us/Ca Market

    Conformity accordance with the instructions, may cause harmful interference to radio communications. However, there Issuer: Husqvarna AB, Drottninggatan 2, S-561 82 is no guarantee that interference will not occur in a Huskvarna, Sweden www.husqvarnagroup.com. particular installation. If this equipment does cause...
  • Page 54 54 - Applicable to US/CA market 1691 - 006 - 09.01.2023...
  • Page 55 1691 - 006 - 09.01.2023 Applicable to US/CA market - 55...
  • Page 56 Copyright © 2023 Husqvarna AB (publ.) All rights reserved. Husqvarna and other product and feature marks are trademarks of Husqvarna Group. www.husqvarna.com Original instructions 1143078-95 2023-01-13...

This manual is also suitable for:

Ceora 544 eposCeora 546 epos

Table of Contents