Table of Contents
Advertisement
Push 1 - Blower ON (Full Speed)
Push 2 - Blower ADJUSTABLE (Adjustable Speed)
Push 3 - Blower OSCILLATING (Oscillating Speed)
Push 4 - Blower OFF (Default State)
Note: If left on, this accessory will automatically switch off after 20 minutes. If the heater element is
on, switching on this accessory may cause the heater to loadshed and switch off.This is to keep the
total power load to a safe level.
4.1 Adjustable Speed Mode (SPVSB only)
If a Spa Power Variable-Speed Blower is fitted, the spa user has the ability to adjust the blower speed to any
desired setting. The Up and Down buttons are used to set the desired blower speed. Note: If the blower is in
Full Speed or Oscillating modes then pushing the Up or Down button will put it into Adjustable Speed mode
and then adjust the speed.
Step 1)
Press Air Button twice to set Adjustable Speed Mode
Step 2)
Press Up
Step 3)
Press Down
5. LIGHT OPERATION
Your spa may have been fitted with either of two different LED lights; a Spa Power Coloured Light (SPCL) or
a Spa Power Variable Coloured Light (SPVCL). The Spa Power Coloured Light is a single coloured light that
is either on or off. The Spa Power Variable Coloured light is a light that has the ability to change between 12
different colours and white (see below for user instructions).
The multi-function Light Button
the different operating modes of the Spa Power Variable Colour Light. Two short presses of the button
will turn the Spa Power Coloured Light on and off or five short presses of the button will cycle the Spa
PowerVariableColouredLight asfollows:
Light Button
Push 1 - Light ON
Push 2 - Light ADJUST
Push 3 - Light CYCLE SLOW
Push 4 - Light CYCLE FAST
Push 5 - Light OFF
Note: This is a multi-function button which performs the following -
1) Short presses of this button activate the light functions as detailed above.
2) Holding this button will begin to increase the set temperature of the spa.
3) When a Spa Power Variable Speed Blower is fitted and is turned on this button increases the
blowerspeed.
5.1 Adjustable Colour Mode (SPVCL only)
When the light is on, short presses of the Down button
and then sequentially select through all the available colours. The last colour set in this mode will be remem-
bered the next time the light is used.
AIR
AIR
AIR
AIR
to increase speed of blower
to decrease speed of blower
is used to turn the light on and off (SPCL) and select through
(SPCL - On) (SPVCL Colour - White)
(SPCL - Off) (SPVCL Adjustable Colour Mode)
(SPVCL Cycle through colours - slowly)
(SPVCL Cycle through colours - quickly)
(Default State)
Red
Light
Orange
Light
Green
Light
No
Light
AIR
will put the light into adjustable colour mode
7
Light turns
to orange
- Quick Links:
- Installation & Safety Notes
Hide quick links:
Advertisement
Table of Contents
