Table of Contents
Advertisement
Tear off below mylars from "Main
S9
Shielding"
a. MYLAR BL
b. MYLAR USB
c. MYLAR SPK
d. MYLAR ALS
Unplug "Ambient Light Sensor FFC"
S10
from "Interface board"
Tear off "Ambient Light Sensor FFC"
from "Main Shielding"
Disassemble "Sensor board" from
"Middle Frame"
Unplug "Ambient Light Sensor FFC"
S11
from "Sensor board"
Tear off an acetate tape from "USB
S12
board wire" and "Panel"
Unplug 2 "USB board FFC" and "USB
Board wire" from "Interface board"
Unlock 1 screw to disassemble "USB
board" from "Middle Frame"
(Screw Torque: 4.5±0.5 Kgf)
Unplug all cables from "USB board"
S13
- 14 -
Advertisement
Table of Contents
