Table of Contents
Advertisement
Quick Links
MULTI-PLAY COMPACT
DISC PLAYER
PD-NvMgsIO
GED WISE
DIGITAL AUDIO
Operating
Instructions
@
The iflustration shows U.S. and Canadian models.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know
how to operate your unit properly. After you have
finished reading the instructions, keép the manual in a safe
place for future reference.
in some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the drawings. However, the method of connecting and
operating the unit is the same.
WARNING:710
prevent FIRE OR SHOCK HAZ-
ARD,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
IMPORTANT
NOTICE
LINE VOLTAGE
SELECTOR
SWITCH
Only
muiti-voltage
modeis
are
provided
with
this
switch. U.S., Canadian, European, U.K., and Austra-
lian models are not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and
keep it in a secure area. This is for your
security.
[For Canadian model]
CAUTION: to prevent ELECTRIC SHOCK
DO
NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
ATTENTION: pour
prevenin,
Les
cHocs
ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE
AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES
PEUVENT
ETRE
INSEREES
A
FOND
SANS
EN
LAISSER
AUCUNE PARTIE A DECOUVERT.
r
| "This product is manufactured to comply with the radio inter-
| ference
requirements
of EEC
Directive
76/889/EEC
and
82/499/EEC."
only.
Never
use
this
model
with
110V
setting
in
Saudi Arabia.
The line voltage selector switch is located on the rear
panel of this player. Before your player is shipped from
the factory, the switch is set to the power require-
ments of the player's destination. Check that it is set
properly before plugging the power cord into the out-
let. If the voltage is not properly set or if you move
to an area where the voltage requirements differ, ad-
just the selector switch as follows:
© Use a medium-sized (flat-blade) screwdriver. Insert
the tip of the screwdriver into the groove of the
selector switch and turn it so that the power vol-
tage marking of your area points to the arrow.
VOLTAGE
SELECTOR
Y) PIONEER'
The future of sound and vision.
Advertisement
Table of Contents
