Advertisement
Chapter 4 – Main-board Features
This control board is suitable for the control of wing gates, swing gates andquick-pass gates
equipped with DC brushless motors.
1. This control board adopts ARM embedded system as the core of control. It has the advantages of
faster processing speed, more powerful function expansion andmore stable performance.
2. Adopt full data management, all function parameters are set digitally, setting opera-tion is simpler.
3. The motor drive runs according to the movement curve, the operation is stable andreliable, the state is
smooth, and the brake movement is coordinated and synchronized.5.The equipment is fully functional, with
an illegal break-in alarm, a trailing alarm, a reverse processing, an anti-pinch on the ram, and a free passage
setting
Single or multiple people, motor stall protection, delay of exit passage, peak trafficmode, emergency
6.
traffic mode and other functions.
Complete interface mode, both PNP and NPN infrared beams on the market can beused. The infrared
7.
sensing sequence can be set up and down.
Customer-defined indicator output mode. The side lights and ceiling lights can be set according to the
8.
needs of the device to display the status of the lamp and the commoncathode and common anode of the
lamp.
The control panel comes with a voice broadcast function, and the directions of the greeting
9.
language at the entrance and exit can be set in the menu.
Technical Parameters
Input power:24V/3A Drive
Motor:24V/20W
Infrared sensor interface:NPN normally open collector open circuitCommunication
interface:RS232serial port
Communication distance:≤10meter
Input interface: 12V level signal or 12V pulse signal with pulse width >100ms, drivecurrent >10mA
Output power:DC12V ≤1A
relative humidity:0-90%(No condensation)
environment temperature:-15C-60C
Passing speed: 35 people/min (normally open mode), 25 people/min (normally closed mode)Gate opening and closing
time: 0.8 seconds for flap gates;1-2 seconds for swing gates.
6
Advertisement
