– Open the door carefully Safety instructions when the programme is still running. There is a risk of hot water spraying Before you switch ON out of the appliance. the appliance – Read and observe the safety information and instructions Please read the operating and installation for use on the packaging for cleaning instructions carefully.
Deactivating the button lock: Getting to know your – Hold down the button + for approx. appliance 4 sec. until the display goes out. When the programme ends ( : on the Diagrams of the control panel and the digital display), the button lock is interior of the appliance can be found in cancelled.
Setting amount of rinse aid Rinse aid % The amount of rinse aid dispensed can be set from : to : . This is the factory As soon as the rinse-aid refill indicator X setting : is lit on the fascia, there is still a rinse-aid Do not change the amount of rinse aid reserve of 1 –...
Unloading the dishwasher Utensils To prevent water from dripping off the upper basket onto the utensils in the lower Not suitable basket, it is recommended to empty – Cutlery and utensils made of wood. the appliance from the bottom up. –...
Small accessories holder * S m a l l a c c e s s o r i e s h o l d e r Heavily soiled utensils (pans) should * depending on model be placed in the bottom basket. The more Light-weight plastic accessories, e.g.
Adding detergent Detergent – If the detergent dispenser 1Z is still closed, press the lock 1b to open the You can use tablets as well as powder detergent dispenser. or liquid detergents for dishwashers, but Pour detergent into the dry detergent never use washing up liquid.
Page 10
If the utensils are only lightly soiled, slightly less than the indicated amount of detergent is usually adequate. Suitable detergents and care products can be purchased online via our website or via customer service (see back page). Notes – If programmes are short, tablets may not have full cleaning effect due to different dissolving properties and there may even be undissolved...
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. The programme data has been measured in the laboratory according to AS/NSZ 2007. Programme Type of utensils Programme Possible...
Programme selection Additional options You can select a suitable programme according to the type of utensils and * depending on model degree of soiling. Additional options can be set with the buttons @. Information for test institutes Ÿ Test institutes can request the conditions Express Wash/ Speed for running comparison tests by sending E x p r e s s W a s h / S p e e d P e r f e c t...
T imer programming * Washing the dishes T i m e r p r o g r a m m i n g * depending on model You can delay the start of the programme A qua sensor * A q u a s e n s o r in 1-hour steps up to 24 hours.
To change the setting: T erminating the programme T e r m i n a t i n g t h e p r o g r a m m e – Press programme button 3. (Reset) Each time the button is pressed, the –...
Filters Maintenance and care The filters 1: keep large foreign objects in the rinsing water away from the pump. A regular inspection and maintenance of These foreign objects may occasionally your machine will help to prevent faults. block the filters. This saves time and prevents problems.
Spray arms Troubleshooting Limescale and contaminants in the rinsing water may block nozzles and bearings on The majority of faults which could occur in the spray arms 1* and 12. daily operation can be rectified by the – Check outlet nozzles on the spray arms user.
Waste water pump ... when the appliance is switched on Large food remnants in the rinsing water not retained by the filters may block the The appliance does not start. waste water pump. The rinsing water is – The mains fuse has tripped. then not pumped out and covers the filter.
– Clean filter in the supply hose. Knocking/rattling noise during rinsing – Spray arm is striking utensils. – Utensils not arranged correctly..on the utensils Food residue on the utensils. – Utensils placed too closely together, utensils basket overfilled. –...
Customer service Installation If the advice given does not resolve your The dishwasher must be connected problem, please contact your customer correctly, otherwise it will not function service. Contact details can be found on properly. The specifications for the inlet the back cover of this instruction manual and outlet as well as the electrical or in the enclosed customer service list.
– Some models: Waste-water connection The plastic housing on the water – The required work sequence can be connection contains an electric valve, found in the installation instructions. If the connecting cables are in the supply required, fit a siphon with an drainage hose.
Electrical connection Transportation – Connect the appliance to an Empty the dishwasher and secure loose alternating current only, ranging from parts. 220 V to 240 V and 50 Hz or 60 Hz Drain the appliance according to the via a correctly installed socket with following steps: protective earth conductor.
Waste disposal Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials. Please dispose of the individual parts separated according to type. Please ask your dealer or inquire at your local authority about current means of disposal.