Page 1
Dryer User Manual BDPB8010W 2960313875_EN/080124.1117...
Page 2
Dear Customer, Please read this guide prior to use this product! Thank you for choosing Beko product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state of the art technology. Please make sure you read and understand this guide and supplementary documentation fully before use.
Page 4
6 Running the product ................18 6.1 Control Panel ......................18 6.2 Symbols ......................18 6.3 Preparation of drying machine ................19 6.4 Program selection and consumption chart ............20 6.5 Auxiliary functions ....................22 6.6 Warning indicators ....................22 6.7 Starting the program ...................23 6.8 Child Lock ......................23 6.9 Changing the program after it is started ..............23 6.10 Cancelling the program ..................24 6.11 End of program ....................24...
1 Safety Instructions This section includes the safety instructions necessary to prevent the risk of personal injury or material damage. • Our company shall not be held responsible for damages that may occur if these instructions are not observed. • Installation and repair operations shall always be performed by Authorized Service.
• Keep the packaging materials away from children. Risk of injury and suffocation. • Keep all additives used with the product away from children. • Before disposing of the product, cut the power cord and destroy the loading door. 1.3 Electrical Safety •...
1.5 Installing safety • To prepare the product ready for installation, ensure that the electrical installation and water drain is proper by checking the information in the user manual. If it is not suitable for installation, call a qualified electrician and plumber to arrange the utilities as necessary.
• Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact. • The new hose sets supplied with the product shall be used. Do not re-use the old hose sets.
Page 9
• Empty the pockets of the clothes and remove items such as matches and lighters. • If all items cannot be removed rapidly and cannot be placed where heat can dissipate, do not stop the drying machine before drying cycle completed. •...
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.
2 Environmental instructions 2.1 Compliance with the WEEE Regulations and Waste Disposal This product does not contain the dangerous and prohibited materials indicated in the “Regulation on The Control of Waste Electrical and Electronic Equipment” published by Ministry of Environment and Urbanisation of Republic of Turkey. Complies WEEE Regulations.
3 Your drying machine 3.1 Technical specifications Height (Min. / Max.) 84,6 cm / 86,6 cm* Width 59,8 cm Depth 60,7 cm Capacity (max.) 8 kg** Net weight (± %10) 44 kg Voltage Rated power input See type label*** Model code * Min.
3.2 General appearance 3.3 Scope of delivery 1. Water 5. Water discharge filling cap* hose* 2. Filter 6. Pure drawer spare Water* sponge* 7. Odour 3. User Capsule Manual Group* 8. Filter 4. Brush* cloth* 1. Top panel 2. Control panel *Optional - may not be included, depends on 3.
4 Installation • Once the drying machine is installed, the connections must stay stable. After placing the drying machine, ensure that the back wall does not come in contact Read the “Safety Instructions” first! with any extrusion (a water tap, electrical outlet etc.).
4.4 Adjusting the stands Do not leave an accessory or any parts of the shipping safety group NOTICE inside the drum. Until the drying machine stands level 4.3 Water connection and sturdy, adjust Instead of periodically draining the water the stands by turning accumulated in the water tank, you can them left and right.
5 Preparation 5.3 Preparing the laundry to be dried Items such as coins, metal parts, needles, nails, screws, stones etc. may damage the drum group of the product or may cause functional Read the “Safety Instructions” first! operation issues. Therefore check all laundry that will be loaded to the product.
• If you are using environment friendly filter, you are not required to clean the filter after every cycle. When the environment friendly icon is lit on the screen, change the filter cloth. 5.5 Correct load capacity NOTICE If the laundry in the product exceed maximum load capacity, it may not...
6.3 Preparation of drying machine • Plug the drying machine. • Open the loading door. • Place the laundry to the drying machine without jamming them. • Push and close the loading door. NOTICE Ensure that no laundry is jammed to the loading door.
6.4 Program selection and consumption chart Programmes Programme Description You can dry your heat-resistant cotton textiles with this programme. A drying setting suitable for the thickness Cottons 1000 of the products to be dried and the desired level of dryness should be selected. It dries single layer, casual cotton textiles in the most Cottons Eco 1000...
Page 21
It is the programme that you can dry your washed products you want to provide with extra hygiene (baby Hygienic Drying clothes, underwear, towels, etc.). It provides high hygiene for your textiles via heat effect. Daily Express Use this program to have 2 shirts ready for ironing. 1200 Energy consumption values Energy consumption value...
End time Allergy UK is the trademark of You can delay the end time of the program up the British Allergy Foundation. to 24 hours with end time function. The Seal of Approval has been 1. Open the loading door and place the created to guide people laundry.
Cleaning of filter drawer/ • For example, Pause the program and turn the On/Off/Program Selection button to heat exchanger select the Extra Dry program in order to Warning symbol flashes periodically to remind select the Extra Dry program instead of that filter drawer must be cleaned.
6.10 Cancelling the program If you want to cancel the program and terminate the drying operation for any reason after the drying machine starts running, Pause the program and turn the On/Off/Program Selection button; the program terminates. The inside of the drying machine shall be extremely hot when you cancel the program during machine operation, so run the refreshing...
7 Maintenance and cleaning • Open both of the lint filters (outer and inner) and remove the fibres with your hands or with the brush on the air deflector. You can clean the hair in the filters with a vacuum cleaner.
7.2 Cleaning the sensor • Insert the lint filters on one another and place it back in its place. • There are temperature sensor in the • Clean the inner surface of the loading door dryer that detect whether the laundry is and the gasket with a soft damp cloth or the dry or not.
7.3 Emptying the water tank During drying, the moisture is removed from Move the latches to the laundry and condensed, then the water open the air deflector is accumulated in the water tank. Empty the lid. water tank after each drying session. Condensed water is not potable water! Pull the brush to the...
Page 28
After the cleaning process is completed, place the air deflector cover to its place, move the latches to close it and close the toe board. You can clean by hand, provided you wear protective gloves. Do not try to clean with bare hands. The condenser fins may damage your hands.
8 Troubleshooting The drying operation takes too long. Fibre filter (interior and exterior filters) pores may be clogged. >>> Wash the fibre filters with warm water and dry them The front side of the condenser may be clogged. >>> Clean the front side of the condenser. The ventilation grills in front of the machine may be closed.
Page 30
The fibre filter cleaning icon is lit. Fibre filters (interior and exterior filters) may be unclean. >>> Wash the filters with warm water and dry them. A layer may be formed in the fibre filter pores, leading to clogging. >>> Wash the filters with warm water and dry them. A layer may be formed in the fibre filter (internal and external filters) pores that leads to clogging.<<Wash the filters with warm water and dry>>...