hit counter script
AEG LWX60966B User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer/Dryer
  5. LWX60966B
  6. User manual
AEG LWX60966B User Manual

AEG LWX60966B User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
aeg.com/register
EN User Manual | Washer Dryer
LWX60966B
aeg.com\register

Advertisement

Table of Contents
loading

Related Manuals for AEG LWX60966B

Summary of Contents for AEG LWX60966B

  • Page 1 EN User Manual | Washer Dryer LWX60966B aeg.com\register...

  • Page 2: Table Of Contents

    Welcome to AEG! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.aeg.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................5 3. PRODUCT DESCRIPTION................7 4. TECHNICAL DATA..................8 5.
  • Page 3 • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
  • Page 4 • Do not install the appliance behind a lockable door, a sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open. • Connect the mains plug to the mains socket only at the end of the installation process.

  • Page 5: Safety Instructions

    be washed separately with an extra amount of detergent before being dried in the washer dryer. • Do not use the appliance if items have been soiled with industrial chemicals. • Do not dry unwashed items in the wash dryer. •...
  • Page 6 must be reattached to lock the drum to • When unpacking the appliance, It is prevent an internal damage. possible to see water flowing from the • Always take care when moving the drain hose. This is due to the testing of the appliance as it is heavy.

  • Page 7: Product Description

    • The following spare parts are available for These lamps are intended to withstand at least 10 years after the model has been extreme physical conditions in household discontinued: motor and motor brushes, appliances, such as temperature, transmission between motor and drum, vibration, humidity, or are intended to pumps, shock absorbers and springs, signal information about the operational...

  • Page 8: Technical Data

    The rating plate reports the model name (A), product number (B), electrical ratings (C) and serial number (D). Mod. xxxxxxxxx Prod.No. 910000000 00 000V ~ 00Hz 0000 W 00000000 4. TECHNICAL DATA Dimension Width/ Height/ Total depth 59.7 cm /84.7 cm /64.2 cm Electrical connection Voltage 230-240 V...
  • Page 9 2. Remove the cardboard top. Remove the sure not to damage the hoses. polystyrene packaging materials. 6. Remove the polystyrene protection from 3. Remove the internal film. the bottom. Pull up the appliance in vertical position. 4. Open the door. Remove the polystyrene piece from the door seal and all the items 7.
  • Page 10 9. Put the plastic caps in the holes. You can find these caps in the user manual bag. 45º 45º 20º 20º We recommend that you keep the packaging and the transit bolts for any 2. Position it toward left or right depending on movements of the appliance.
  • Page 11 It is possible to connect the drain hose in different ways: min.600 mm max.1000 mm Make sure that the drain hose makes a loop To a stand pipe with vent hole - Insert the to prevent particles going into the appliance drain hose directly into a drain pipe or stand from the sink.

  • Page 12: Control Panel

    The rating plate and the 'Technical Data' The power supply cable must be easily chapter indicate the necessary electrical accessible after installing the appliance. ratings. Make sure that they are compatible For any electrical work required to install this with the mains power supply. appliance, contact our Authorised Service Check that your domestic electrical Centre.
  • Page 13 6.2 Display Time area : Programme duration : Selected drying time : Delay start : Alarm codes : Message of error : The programme is completed. Time programme indicators : Normal duration indicator : Quick indicator : Super quick indicator Delay start indicator Child safety lock indicator Door locked indicator...

  • Page 14: Programmes

    7. PROGRAMMES 7.1 Programme Chart Programme Maximum load Programme description Default temperature Reference spin (Type of load and level of soiling) Temperature range speed 9 kg Eco 40-60 (Wash only mode) 1600 rpm 40 °C White cotton and fast-coloured cotton. Normally soiled items.
  • Page 15 Programme Maximum load Programme description Default temperature Reference spin (Type of load and level of soiling) Temperature range speed Rinse To rinse and spin the laundry. All fabrics, except 9 kg woollens and very delicate fabrics. Reduce the spin 1600 rpm speed accordingly to the type of laundry.
  • Page 16 Programme Cottons ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Wool Delicates ■ ■ ■ ■ ■ ■ Anti-allergy ■ ■ ■ ■ ■ ■ 20min 3kg ■ ■ ■...
  • Page 17 7.2 Automatic drying Initial cycle times for programmes with Auto Dry option are only estimates, the actual drying time may slightly differ from the time displayed. Dryness Level Type of fabric Load Cottons and Linen up to 6.0 kg Extra Dry (bathrobes, bath towels, etc) For towelling materials For items to be stored...

  • Page 18: Options

    7.4 Woolmark Wool Care - Blue according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M0000. • The wool drying cycle of this machine has been tested and approved by The Woolmark Company.

  • Page 19: Settings

    The display shows the related indicator. 8.5 Prewash 8.8 Time Save With this option you can add a prewash phase to a washing programme. Press Time Save to decrease the programme Use this option for heavy soil. time. When you set this option the programme You can select: duration increases.

  • Page 20: Before First Use

    10. BEFORE FIRST USE 2. Open the water tap. 3. Put 2 litre of water in the detergent compartment for washing phase. During installation or before first use you This activates the drain system. may observe some water in the 4.
  • Page 21 3. Carefully close the detergent drawer. 11.3 Check the position of the detergent flap 1. Pull out the detergent dispenser until it stops. Make sure that the flap does not cause a blockage when you close the drawer. 11.4 Setting a programme 1.
  • Page 22 You can cancel or change the set of the If the indicator flashes, the door is locking. If the display delay start before you press the . To shows an alarm message after the cancel the delay start: indicator has flashed for a few •...
  • Page 23 The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the Before starting the new programme the creases in the laundry. appliance could drain the water. In this case, make sure that the detergent is still •...

  • Page 24: Daily Use - Drying Only

    12. DAILY USE - DRYING ONLY The display shows the door locked indicator WARNING! . The drying indicator starts to flash. Refer to Safety chapters. You cannot set all dryness levels for any type of laundry. This appliance is an automatic washer dryer.

  • Page 25: Daily Use - Washing & Drying

    2. Remove the laundry from the appliance. When the door locked goes off in the Make sure that the drum is empty. display, you can open the door. 3. Keep the door ajar, to prevent mildew and odours. 1. Turn the programme knob to 4.

  • Page 26: Fluff In The Fabrics

    13.4 End of the programme The appliance stops automatically. The If you set only 10 minutes of drying after acoustic signals operate (if they are active). washing, the appliance calculates also For more information see "At the end of the the duration of the anti-crease and the drying programme "...
  • Page 27 • A very small load can cause balance 15.3 Detergent type and quantity. problems with the spin phase leading to excessive vibration. If this occurs: The choice of detergent and use of correct - interrupt the programme and open the quantities not only affects your wash door (refer to "Daily Use"...
  • Page 28 15.7 Items not suitable for drying • sudsing, • reduced washing effect, Do not set a drying programme for this • inadequate rinsing, laundry: • a greater impact for the environment. • Synthetic curtains. • Pieces of clothing with metal inserts. 15.4 Ecological hints •...

  • Page 29: Care And Cleaning

    To avoid the static charge at the end of the When the drying programme is completed drying cycle: remove the laundry promptly. 1. Use fabric conditioner in the washing cycle. 2. Use special fabric conditioner for tumble dryers. 16. CARE AND CLEANING 16.2 Removing foreign objects WARNING! Refer to Safety chapters.
  • Page 30 To remove rust particles use only special fibers that fall off the clothes to be drained out products for washing machines. Do this with the water. Regularly examine the seal. separately from the laundry wash. Coins, buttons, other small items can be recovered at the end of the cycle.
  • Page 31 16.8 Cleaning the drain filter Do not clean the drain filter if the water in the appliance is hot. • Repeat the steps 2 and 3 until the water stops flowing out. • Always keep a rag nearby to dry up any water spillage. 180°...
  • Page 32 Regularly check the drain pump filter and make sure that it is clean. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. Make sure also that you tighten the filter correctly to prevent leakages.

  • Page 33: Troubleshooting

    45° 20° 16.10 Emergency drain 1. Disconnect the mains plug from the mains socket. Because of a malfunction, the appliance 2. Close the water tap. cannot drain the water. 3. Put the two ends of the inlet hose in a container and let the water flow out of the If this occurs, do steps (1) through (8) of hose.
  • Page 34 With some problems, the display shows an alarm code and the Start/ Pause button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pause button until the indicator stops flashing (see the picture below).
  • Page 35 If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. In case of different problem with the washing machine check the table below for possible solutions. Problem Possible solution •...
  • Page 36 Problem Possible solution Too much foam in the drum • Reduce the quantity of detergent. during the washing cycle. • Make sure that the flap is in the correct position (UP for powder detergent - After the washing cycle, DOWN for liquid detergent). there are some detergent residues in the dispenser •...

  • Page 37: Consumption Values

    5. Take out the laundry and then close the appliance door. 6. Close the filter flap. 18. CONSUMPTION VALUES 18.1 Introduction See the web link www.theenergylabel.eu for detailed information about Energy Label. The QR code on the energy label supplied with the appliance provides a web link to the product information sheet.
  • Page 38 18.3 According to UK Ecodesign for Energy-Related Products and Energy Information Regulations Washing only Eco 40-60 pro‐ rpm 1) Litres hh:mm °C gramme Full load 0.820 55,0 3:40 52,00 35,0 1551 Half load 0.540 45,0 2:35 52,00 33,0 1551 Quarter load 0.185 38,0 2:30...

  • Page 39: Environmental Concerns

    Programme rpm 1) Litres hh:mm °C Synthetics 0.800 55,0 2:15 35,00 40,0 1200 40°C Delicates 0.400 60,0 1:05 35,00 30,0 1200 30°C Wool 0.300 65,0 1:05 30,00 30,0 1200 30°C Reference indicator of the spin speed. Suitable for washing heavily soiled textiles. Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.
  • Page 40 157079291-A-062024...

Table of Contents