Remove the touchpad cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
"Remove the battery pack" on page 30
Step 1.
Disconnect the touchpad cable from the touchpad board and the system board, and then remove
the touchpad cable.
Figure 16. Disconnect and remove the touchpad cable
Go to
https://support.lenovo.com/partslookup
replacement part:
Touchpad cable
Remove the Hall sensor board and cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
"Remove the battery pack" on page 30
Step 1.
Disconnect the Hall sensor board cable from the Hall sensor board and the system board, and then
remove the Hall sensor board cable.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
37