LG 43UU64 Series Owner's Manual
Hide thumbs
Also See for 43UU64 Series:
- Manual (72 pages) ,
- Owner's manual (39 pages) ,
- Owner's manual (21 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for LG 43UU64 Series
Summary of Contents for LG 43UU64 Series
- Page 1 LED TV UU76* (M5 X L25) (M4 X L12) : Depending on model / www.lg.com...
- Page 5 ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK...
- Page 6 H/P OUT CLOCK Satellite IN OPTICAL DIGITAL AUDIO OUT...
- Page 7 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
- Page 8 HDMI-DVI IN AV IN HDMI IN AUDIO OUT DVI OUT...
- Page 10 65UU761H-TB 1456 318.5 63.9 26.2 24.5 65UU761H-GB AC 100-240 V ~ 50 / 60 Hz Power requirement /...
- Page 11 OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. *MFL70180547* www.lg.com (1807-REV01) Copyright © 2018 LG Electronics Inc. All Rights Reserved.
- Page 12 Warning! Safety Instructions • Ventilation - Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. - Do not install the product on a carpet or cushion. - Do not block or cover the product with cloth or other materials while unit is plugged in.
- Page 13 Unauthorized modification could void the user’s authority to operate this product. • Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage. • Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
- Page 14 Preparing Separate Purchase Separate purchase items can be changed or modified for quality • If the TV is turned on for the first time after it was shipped from the improvement without any notification. Contact your dealer to buy these factory, initialization of the TV may take a few minutes.
- Page 15 Lifting and moving the TV Wall Mounting Bracket (Depending on model) Make sure to use screws and wall mount bracket that meet the VESA Please note the following advice to prevent the TV from being scratched standard. Standard dimensions for the wall mount kits are described in or damaged and for safe transportation regardless of its type and size.
- Page 16 Mounting on a Table Attaching the TV to a Desk (Depending on model) The TV should be attached to a desk so it cannot be pulled in a forward/ 1 Lift and tilt the TV into its upright position on a table. backward direction, potentially causing injury or damaging the product.
- Page 17 TV and a table. performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices.
- Page 18 Satellite dish • When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust Connect the TV to a satellite dish to a satellite socket with a satellite RF and insects.
- Page 19 External Speakers Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. • Use USB 1 port when connecting a webcam. USB 2 port may not support some webcam.
- Page 20 Network Method of volume control port (Depending on model) Wired network connection • Cable Spec. (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After Each Up / Down pin is making the physical connection, the TV needs to be set up for network pulled to 3.3 V with CPU communication.
- Page 21 Using Button Adjusting the Angle of the TV to suit view You can simply operate the TV functions, using the button. (Depending on model) Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.
- Page 22 Using Remote Control * To use the button, press and hold for more than 3 seconds. (POWER) Turns the TV on or off. The descriptions in this manual are based on the buttons on the remote Adjusts the brightness of the screen to reduce control.
- Page 23 • Do not mix new batteries with old batteries. This may cause Abnormal display the batteries to overheat and leak. • If the product feels cold to the touch, there may be a small “flicker” • Failure to match the correct polarities of the battery may when it is turned on.
- Page 24 Specifications (Depending on country) Broadcasting Specifications Digital TV Analogue TV PAL B/B, PAL B/G, PAL D/K, PAL-I DVB-T/T2¹ Television system SECAM B/G, SECAM D/K DVB-T/T2/C/S/S2² NTSC-M VHF, UHF Programme Coverage VHF, UHF, CATV C-Band², Ku-Band² ATV & DVB-T/T2 : 3,000 Maximum number of storable programmes DVB-S/S2 : 6,000...
- Page 25 Wireless module (LGSBWAC72) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 14 dBm 5150 to 5725 MHz 16.5 dBm 5725 to 5850 MHz (Not for EU) 11.5 dBm Bluetooth Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 8.5 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency.
- Page 26 HDMI/DVI -DTV supported mode HDMI/DVI -PC supported Mode • PC audio is not supported. Horizontal Vertical Resolution • Use HDMI IN 1 for PC mode. (Depending on model) Frequency (kHz) Frequency (Hz) 31.469 59.94 Horizontal Vertical Resolution 640 x 480p Frequency (kHz) Frequency (Hz) 31.5...
- Page 27 Component port connecting Supported Audio Formats information File (Depending on model) Item Info Format Bit rate 32 Kbps - 320 Kbps Component ports on the TV Sample freq. 16 kHz - 48 kHz .mp3 Support MPEG1, MPEG2 Channels mono, stereo Video output ports on DVD player Bit rate Sample freq.
- Page 28 Video AVC, Motion Jpeg, MPEG-4 LG Electronics will also provide open source code to you on CD-ROM .avi MPEG-1 Layer I, II, MPEG-1 Layer III for a charge covering the cost of performing such distribution (such...
- Page 29 IR CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button Remote control Button (POWER) Remote control Button (Power On/Off) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button...
- Page 30 EXTERNAL CONTROL Phone jack Type (Depending on model) DEVICE SETUP (TV) (PC) • You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified in the RS-232C IN (CONTROL & SERVICE) manual.
- Page 31 RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations Data (Standard RS-232C cable) Command1 Command2 (Hexadecimal) 1 Power 00 to 01 2 Aspect Ratio (See p. 22) 3 Screen Mute (See p. 23) 4 Volume Mute 00 to 01 5 Volume 00 to 64 Control...
- Page 32 Transmission / Receiving Protocol 1 Power (Command: k a) ►To control Power On/Off of the set. (Depending on Model) Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [Command1][Command2][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 01 : On [Command1] : First command to control the TV. (j, k, m or x) [Command2] : Second command to control the TV.
- Page 33 3 Screen Mute (Command: k d) 6 Contrast (Command: k g) ►To select screen mute on/off. ►To adjust screen contrast. You can also adjust contrast in the picture settings. Transmission Transmission [k][d][ ][Set ID][ ][Data][Cr] [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) / Video mute off Data 01 : Screen mute on (Picture off) Data Min : 00 to Max : 64 Data 10 : Video mute on...
- Page 34 9 Tint (Command: k j) 12 Remote Control Lock Mode (Command: k m) ►To adjust the screen tint. ►To lock the front panel controls on the monitor and remote control. You can also adjust tint in the picture settings. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr]...
- Page 35 15 Energy Saving (Command: j q) 17 Equalizer (Command : j v) ►To reduce the power consumption of the TV. You can also adjust ►To adjust equalizer. Energy Saving in picture settings. Transmission Transmission [j][v][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Power Saving Level Function...
- Page 36 19 Programme Skip/Add (Command: m b) 22 Input select (Command: x b) (Main Picture Input) ►To set skip status for the current Programme. ►To select input source for main picture. Transmission Transmission [m][b][ ][Set ID][ ][Data][Cr] [x][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip Data Structure Data 01 : Add...
- Page 37 * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE :...
- Page 38 Regulatory WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • Only using furniture that can safely support the television set.
- Page 39 Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...