Table of Contents
Advertisement
14.2
Installing the 12-V battery
Main work
–
Pull up battery holding bracket
battery compartment with the terminals facing upwards and secure
with battery holding bracket
12-V battery (HJTZ5S-FP-C) (
Info
Ensure that the cable is routed correctly.
W00224-11
–
Slide the battery holding bracket into the attachment.
–
Mount and tighten screw
Guideline
Screw, battery support
bracket
–
3
Attach relay
W00226-11
–
Connect positive cable
Guideline
Screw, battery terminal M5
–
Connect negative cable
Guideline
Screw, battery terminal M5
Contact disks
7
sockets
with the claws toward the battery terminal.
–
Slide positive terminal cover
W00227-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
ELECTRICAL SYSTEM 14
1
, insert the 12-V battery into the
1
.
p. 145)
2
.
M6
6 Nm (4.4 lbf ft)
in the holder.
4
to the 12-V battery.
2.5 Nm (1.84 lbf ft)
5
to the 12 V battery.
2.5 Nm (1.84 lbf ft)
A
must be mounted under screws
8
over the positive terminal.
p. 68)
p. 70)
6
and cable
109
Advertisement
Table of Contents
Troubleshooting
