Table of Contents
Advertisement
Setup & Administration Guide
Item
ID Number Attribute
Department Attribute
Email Address Attribute
Synchronizing with the LDAP Server (Configuration Template)
Set the LDAP server settings used for the authentication method and the search attributes used to identify the user
information.
Set this when you select Remote DB or Local DB and Remote DB as the Authentication Method and LDAP is
selected as the Remote DB.
It can be used as a redundant system of the LDAP server.
Note:
The LDAP server settings that are set here are shared with the settings for Network > LDAP server > Server Settings
(Primary Server) and Server Settings (Secondary Server) used by Contacts. When you change one value, it is reflected in
the other.
1. Select Epson Open Platform Settings > Epson Print Admin Serverless > LDAP server from the
configuration template.
Information Registration and System Configuration
Settings and Explanation
Specify the attribute name to be used when searching for an ID number. Enter a
combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens (-), and
semicolons (;). The first character should be a-z or A-Z.
Example: employeeId
Specify the attribute name to be used when searching for a department name.
Enter a combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens
(-), and semicolons (;). The first character should be a-z or A-Z.
Example: department
Specify the attribute name to be used when searching for an email address. Enter
a combination of between 0 and 255 characters using A-Z, a-z, 0-9, hyphens (-),
and semicolons (;). The first character should be a-z or A-Z.
Example: mail
73
Advertisement
Table of Contents
