Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
AC inlet
FONT lights
Light 1 Light 2
Control panel
*The push tractor is an option (part number CBOQ26').
I
l-l
READY light
Font button LF/FF button
output guide
ribbon cart-
push bactof
Printer Specifications
Printing
Y-pin impact dot matrix
Printing speed:
Characters/inch
Printing direction:
Bidirectional logic-seeking for text ptitig.
command.) Unidirectional for graphics.
increments
86.5 ms per l/6-inch line; 2.88 inches/second with
continuous feed
Memory capacity for 6 NLQ and 6 draft user-dcfincd
characters
I
Epson Draft
Epson NLQ Roman
Epson NLQ Sans Serif
Character tables:
North/South
America:
One italic and 7 graphicscharacter tables
Europe:
Other countxies:
One italic and 5 graphics character tables
13 international character sek
Paper
cassette):
Size
US model: Lcttrr (8.5 x 11 inches)
Other models: A4 (210 x 297 mm)
Thickness
0.065 to 0.14 mm (OS026 to 0.0055 inches)
Weight
64 to 90 g/m2 (17 to 24 lb)
l
Input
paper supply
Total khickncss of paper stack should be less than
5 mm (0.2 inches).
Single shccb (Manual insrrtion):
Width
148 to 257 mm (5.8 to 10.1 inches)
Length
0.065 to 0.14 mm (0.0026 to 0.0055 inches)
Weight
53 to %I g/m' (14 to 24 lb)
l
10
240
12
40
10
48
12
160
Use W g/m* (24 lb) paper under normal
conditions.
AP-2250-1
I
Advertisement
Table of Contents
Related Manuals for Epson 2250
Summary of Contents for Epson 2250
-
Page 1: Printer Specifications
Memory capacity for 6 NLQ and 6 draft user-dcfincd characters 12 cpi condensed Epson Draft Epson NLQ Roman Epson NLQ Sans Serif America: One italic and 7 graphicscharacter tables One italic and 15 graphics character tables One italic and 5 graphics character tables... -
Page 2: Safety Approvals
ActionPrinter 2250 Continuous paper: Width 101 to 254 mm (4 to Copies Three sheets (one original plus two copies) Thickness 0.065 to 0.25 mm (0.0026 Weight 53 to 82 (14 to 22 lb) for one sheet 40 to 58 g/m2 (12 to 15 lb) per sheet in multi-part... -
Page 3: Interface Specifications
Signal level: TTL compatible 36-pin 57-30360 Amphenol connector or Connector: equivalent Default settings The table below shows the default settings that take effect when the printer is initialized. Item Top-of-form position Current paper position or setting in the default- setting mode. -
Page 4: The Control Panel
The panel lights provide information on certain printer conditions settings. READY light light is on when the printer is ready to receive data from The READY the computer. It flashes briefly each time you turn on the printer. light also flashes under the following conditions: The READY The printer is out of paper. -
Page 5: Running The Self Test
To use all of the features of the printer, however, it is best to choose a program with the ActionPrinter 2250 or one of the LX printers on its menu. If your program does not list one of these printers, contact the software manufacturer to see if an update is available. -
Page 6: Installing The Push Tractor
Note: The tractor is an option (part number C80026*). Installing the push tractor 1. Make sure the printer is turned off and is in the flat position. Remove the paper guide. 2. Make sure the paper-release lever on the left side of the push tractor lowered to the single-sheet position. -
Page 7: Removing The Push Tractor
1. When the printer finishes printing the last page and the print head moves to the top-of-form position on the next page, the printer automatically advances the paper to the tear-off position. 2. The READY light ( m ) blinks to indicate the printer is in tear-off buttons at LF/FF FONT mode. -
Page 8: Multi-Part Forms
To make sure that the labels do not peel off and jam the printer, change the back-feed setting in the default-setting mode When the back-feed setting is Disable, the printer never feeds paper backward. -
Page 9: Changing The Default Settings
Note: When you want to remove labels from the printer, always tear off the fresh supply of labels at the rear of the printer as shown below and then press the button to advance the LF/FF remaining labels out of the printer. - Page 10 ActionPrinter 2250 Table A: Language selection Language Light 1 English French German Italian Spanish Once you press the button, the printer prints the current LF/FF default settings and the next instruction in the selected language After printing is finished, go to the next step.
-
Page 11: Default Settings
You can choose from two tear-off positions with the feature. If you select On cutter, the printer feeds the paper perforation to the edge of the printer cover. If you select Above cutter, the printer feeds the perforation about 80 mm (3 inches) beyond the printer cover’s edge. - Page 12 Paper out occurs in any of the following conditions: 1. Paper is not loaded after loading is attempted. 2. The printer has completed printing after loading single sheet paper by manual insertion. 3. The end of continuous paper.