D-Link DI-624M Owner's Manual page 48

Mimo wireless router

Hide thumbs Also See for DI-624M:

Table of Contents

DI-624M User's Manual

2. The wireless client cannot access the Internet in the Infrastructure mode.

Make sure the wireless client is associated and joined with the correct Access Point. To

check this connection: Right-click on the Local Area Connection icon in the taskbar>

select View Available Wireless Networks. The Connect to Wireless Network screen

will appear. Please make sure you have selected the correct available network, as

shown in the illustrations below.

Check that the IP Address assigned to the wireless adapter is within the same

IP Address range as the access point and gateway. (Since the DI-624M has an

IP Address of 192.168.0.1, wireless adapters must have an IP Address in the

same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no

two devices may have the same IP Address. The subnet mask must be the same

for all the computers on the network.) To check the IP Address assigned to the

wireless adapter, double-click on the Local Area Connection icon in the taskbar

> select the Support tab and the IP Address will be displayed. (Please refer to

Checking the IP Address in the Networking Basics section of this manual.)

If it is necessary to assign a Static IP Address to the wireless adapter, please

refer to the appropriate section in Networking Basics. If you are entering a DNS

Server address you must also enter the Default Gateway Address. (Remember

that if you have a DHCP-capable router, you will not need to assign a Static IP

Address. See Networking Basics: Assigning a Static IP Address.)

D-Link Systems, Inc.

default

Troubleshooting

Table of Contents

Super g di-264mSuper g di-624m