Table of Contents
Related Manuals for LG LGXXXN1C-N5 Series
Summary of Contents for LG LGXXXN1C-N5 Series
- Page 1 Installation manual PV Solar MODULE Please read this manual carefully before operating your set and retain it for future reference. N-TYPE MODELS LGXXXN1C(W)-N5 LGXXXN1C(W)-L5 LGXXXN1K-N5 LGXXXN1K-L5 www.lg.com/global/business/solar...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY ..............03 BEFORE & AFTER INSTALLATION ......05 Before Installation ................05 After Installation ...................05 ELECTRICAL INSTALLATION .......06 Danger ....................06 Electrical Connections .................06 Diodes ....................06 Series Connection ................06 Parallel Connection ................07 General Wiring..................07 Earth Grounding ..................07 MECHANICAL INSTALLATION ......08 Module Mounting .................08 Site Consideration ................08 Mounting Methods ................08... -
Page 3: Safety
SAFETY The instructions related to the safety indicated in the Do not approach the damaged following are for preventing unexpected danger or or broken module unless you are damage in advance by safely and exactly using the product. an authorized or qualified expert. Failure to comply may result in DANGER serious bodily injury or death. - Page 4 Do not touch the glass surface or Module frame of the solar module after Module Installing structure installation of the module. It may Installing structure (Stralght type) (bent type) result in injury or death. Heavy objects must be kept off of the solar module.
-
Page 5: Before & After Installation
BEFORE & AFTER INSTALLATION Before Installation • Be careful not to damage the cable when using a tool Please carefully read this manual before installation. such as a knife to remove the cable tie that fixes the • Solar module installation and maintenance must be junction box cable. -
Page 6: Electrical Installation
Diodes properties or physical configurations in the same system. • All LG modules are equipped with factory installed • Match the polarities of cables and terminals when bypass diodes. The factory-installed diodes provide making the connections; failure to do so may result in proper circuit protection for the module from damage to the panel. -
Page 7: Parallel Connection
PV must be done on the frames of solar modules and arrays output. although the solar modules from LG meet the conditions of • Depending on national directives, additional safety safety class II. The national directives must be respected. -
Page 8: Mechanical Installation
• Select the appropriate orientation to maximize sunlight Excluded Operating Environments exposure. • The solar modules from LG Electronics can not be The module generates maximum output power when it operated in a location where they could come in direct faces the sun directly. - Page 9 • The solar module may be mounted by using the Mounting by using clamps following methods: (*Torque:8~12N∙m) • The module may be fastened to a support by using When installing modules in heavy snow areas, clamps on both the long edge and the short edge of •...
-
Page 10: Disclaimer Of Liability / Disposal
Disclaimer of Liability • By beginning to installation process, the installer has to read and completely understand this Installation Manual. • If installer had any questions regarding this installation manual, the installer would have contacted LG with any questions or concerns. -
Page 11: Product Specifications
PRODUCT SPECIFICATIONS N-TYPE Rated electrical characteristic except power rating within -0/+3 percent are within 5 percent of measured. o i t , Cell temp. 25℃, 1.5AM Electrical Properties Mechanical Properties Max. Max. Max. Module Pmax Power Voc at Isc at Vmpp Impp at No. - Page 12 PRODUCT SPECIFICATIONS ◇ Female and male cable couplers ◇ Model Cable Cross Section Ø A (Cable outer diameter) Rated current Female cable coupler 4mm² 5.5 ~ 9mm 12AWG Male cable coupler 4mm² 05-8-cm 5.4 ~ 7.2mm 12AWG ※ See more information >> http://www.multi-contact.com/ http://www.renhesolar.com/ Electrical Properties(NMOT*)
-
Page 13: Dimensions Of Modules
Dimensions of Modules Unit: mm / in. LGXXXN1C(W)-N5 / LGXXXN1C(W)-L5 / LGXXXN1K-L5 60Cell Module Frame Cross section Long Frame Short Frame... -
Page 14: Appendix
Fig 6. Clamping Type Position Load Position Load (mm) Front/Rear(Pa) (mm) Front/Rear(Pa) 0~300 2400/2155 0 ~ 300 5400/2155 800~900 5400/4000 Note) All mechanical installation methods and bolting method in this appendix were not tested by VDE. It is evaluated by LG internal test. - Page 15 Fig 10. Clamping Type Position Load Position Load (mm) Front/Rear(Pa) (mm) Front/Rear(Pa) 0~300 200~400 2400/2155 2155/2155 200~400 0~300 Note) All mechanical installation methods and bolting method in this appendix were not tested by VDE. It is evaluated by LG internal test.
- Page 16 Height • Follow the clamp manufacturer’s recommended applied torque to fasten the clamps. • Depth <Edge Clamp> Note) All mechanical installation methods and bolting method in this appendix were not tested by VDE. It is evaluated by LG internal test.
-
Page 17: Unloading Flow Guide
Unloading Flow Guide If you are unloading using heavy equipment such as a crane, please follow the procedure below. [ Step 1 ] [ Step 2 ] [ Step 3 ] [ Step 4 ] Step 1. Place the packaging on a flat surface. Step 2. - Page 18 Seoul 07336, Korea Contact: solar-svc@lge.com http://www.lg-solar.com This document is subject to change without notice. LG, LG logo and Life's Good are trademarks of LG Electronics, Inc. worldwide. Trademarks and intellectual properties of LG Electronics, Inc. are protected by international copyright laws.