Page 5
English CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL DCD708, DCD709 Congratulations! may differ. This may significantly increase the exposure level over the total working period. You have chosen a D WALT tool. Years of experience, thorough An estimation of the level of exposure to vibration should product development and innovation make D WALT one of the also take into account the times when the tool is switched...
Page 7
English b ) Avoid body contact with earthed or grounded 4) Power Tool Use and Care surfaces such as pipes, radiators, ranges and a ) Do not force the power tool. Use the correct power refrigerators. There is an increased risk of electric shock if tool for your application.
Page 8
English Apply pressure only in direct line with the bit and do not unpredictable behaviour resulting in fire, explosion or risk • of injury. apply excessive pressure. Bits can bend causing breakage f ) Do not expose a battery pack or tool to fire or or loss of control, resulting in personal injury.cushion and limit excessive temperature.
Page 9
English Disconnect the charger from the outlet before • Before using charger, read all instructions and cautionary • markings on charger, battery pack, and product using attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce battery pack.
Page 10
English Do not store or use the tool and battery pack in The DCB118 charger is equipped with an internal fan designed • locations where the temperature may reach or exceed to cool the battery pack. The fan will turn on automatically when 40 ˚C (104 ˚F) (such as outside sheds or metal buildings the battery pack needs to be cooled.
Page 11
English nOTE: Battery packs should not be stored completely depleted of the UN Recommendations on the Transport of Dangerous of charge. The battery pack will need to be recharged before use. Goods Manual of Tests and Criteria. In most instances, shipping a D WALT battery pack will be Labels on Charger and Battery Pack excepted from being classified as a fully regulated Class...
Page 12
English 1 Belt hook (included with some models) Belt hook (included with some models) 1 Magnetic bit holder (included with some models) Screw 1 Li‑Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1 Magnetic bit holder (included with some models) models) Date code 2 Li‑Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, Y2...
Page 13
English Speed Selection (Fig. A) nOTE: The fuel gauge is only an indication of the charge left on the battery pack. It does not indicate tool functionality and is The tool features two speed settings for subject to variation based on product components, temperature greater versatility. nOTE: Do not change speeds when the tool and end‑user application.
Page 14
English OPERATION Recommendations for screwdriving • Start with lower torque settings, then advance to higher Instructions for Use torque settings to avoid damage to the workpiece or fastener. WARNING: Always observe the safety instructions and • Make some practice runs in scrap or on unseen areas of the applicable regulations.
Page 15
English • A smooth even flow of material indicates the proper Products and batteries contain materials that can be drilling rate. recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according • Drill straight, keeping the bit at a right angle to the work. Do to local provisions.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)