Manipulating Bootflash on the Redundant Supervisor Engine
Manipulating Bootflash on the Redundant Supervisor Engine
Note
To manipulate the redundant supervisor engine bootflash, perform one or more of the following tasks:
Command
Switch# dir slaveslot0: target_filename
Or:
Switch# dir slavebootflash: target_filename
Switch# delete slaveslot0: target_filename
Or:
Switch# delete slave bootflash: target_filename
Switch# squeeze slaveslot0: target_filename
Or:
Switch# squeeze slavebootflash: target_filename
Switch# format slaveslot0: target_filename
Or:
Switch# format slavebootflash: target_filename
Switch# copy source_device : source_filename
slaveslot0: target_filename
Or:
Switch# copy source_device : source_filename
slavebootflash: target_filename
Software Configuration Guide—Release 12.2(25)EW
6-14
The console port on the redundant supervisor engine is not available.
Chapter 6
Configuring Supervisor Engine Redundancy Using RPR and SSO
Purpose
Lists the contents of the slot0: device on the redundant
supervisor engine.
Lists the contents of the bootflash: device on the redundant
supervisor engine.
Deletes specific files from the slot0: device on the redundant
supervisor engine.
Deletes specific files from the bootflash: device on the
redundant supervisor engine.
Squeezes the slot0: device on the redundant supervisor
engine.
Squeezes the bootflash: device on the redundant supervisor
engine.
Formats the slot0: device on the redundant supervisor engine.
Formats the bootflash: device on the redundant supervisor
engine.
Copies a file from the active supervisor engine to the slot0:
device on the redundant supervisor engine.
Copies a file to the bootflash: device on a redundant
supervisor engine.
Source could be the active supervisor engine or a TFTP server.
Note
OL-6696-01