Chapter 13 Configuring Smartport Macros; Understanding Smartport Macros - Cisco 4500M Software Manual
Software guide
Hide thumbs
Also See for 4500M:
- Command reference manual (578 pages) ,
- Hardware installation and maintenance manual (143 pages) ,
- Upgrade manual (24 pages)
Table of Contents
Advertisement
Configuring SmartPort Macros
This chapter describes how to configure and apply SmartPort macros on your switch.
For complete syntax and usage information for the switch commands used in this chapter, refer to the
Note
Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/index.htm.
This chapter consists of these sections:
•
•
•
Understanding SmartPort Macros
SmartPort macros provide a convenient way to save and share common configurations. You can use
SmartPort macros to enable features and settings based on the location of a switch in the network and
for mass configuration deployments across the network.
Each SmartPort macro is a set of CLI commands that you define. SmartPort macro sets do not contain
new CLI commands; Each SmartPort macro is a group of existing CLI commands.
When you apply a SmartPort macro on an interface, the CLI commands contained within the macro are
configured on the interface. When the macro is applied to an interface, the existing interface
configurations are not lost. The new commands are added to interface and are saved in the running
configuration file.
OL-6696-01
Understanding SmartPort Macros, page 13-1
Configuring Smart-Port Macros, page 13-2
Displaying SmartPort Macros, page 13-8
C H A P T E R
Software Configuration Guide—Release 12.2(25)EW
13
13-1
Advertisement
Table of Contents
