Never use a pencil tip to change switch settings. Residue from the
pencil can damage the system.
NOTE
neath the keyboard. Therefore, if you need install DIMM modules,
you might want to do so while the system is already disassembled.
Reassemble the system as follows:
8.
T
Lift up the keyboard and align the tabs on the front of it with the
grooves in the system.
T
Reseat the keyboard in its original position.
T
Slide the speaker caps back onto the system.
4-56 Using Your NEC Versa
!
The system memory expansion slots are also located under-
CAUTION
Setting the Dip Switch