Creating A Report - HP 6100 Software Manual

Hp storageworks 4x00/6x00/8x00 enterprise virtual array updating product software guide (xcs 6.220) (5697-0459, october 2010)

Hide thumbs Also See for 6100:

Table of Contents

Select Customer Details and enter the following information:

Enter your name in Name. This information is required.

Enter your e-mail address in E-Mail to receive the completed report. This information is

required. It is not necessary to have an e-mail address connected to the EVA controller. You

should enter the e-mail address where you typically receive e-mail. You can enter multiple

email addresses in E-Mail by separating entries with a semicolon (;).

Enter data in the remaining boxes as appropriate. This information is included in the reports,

but is not required.

To send your raw data to HP automatically when creating a report, select Automatically

e-mail the collected raw data on completion.

Click Next to save and proceed.

NOTE:

For information on using Advanced Settings, see the SAN Visibility user guide.

Creating a report

Once you have configured SAN Visibility for data collection, you can create a report. There are two

methods for creating a report:

•

Automatically—Automatically e-mails the data to HP when collection is complete. This requires

you to know the SMTP address of your mail server. If you have external e-mail access from your

environment, this is the preferred method.

•

Manually—Requires you to manually send the data to HP. If you do not have external e-mail access,

use this method.

HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array Updating Product Software Guide (XCS

6.220)

Table of Contents

Show Quick Links

Table of Contents