Table of Contents
Advertisement
Replacing the front fan assembly
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre User Guide. To obtain a copy of the ThinkCentre User Guide, go to:
http://www.lenovo.com/ThinkCentreUserGuides
This section provides instructions on how to replace the front fan assembly.
Note: The front fan assembly is only available in some models.
To replace the front fan assembly, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 79.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 80.
4. Disconnect the front fan assembly cable from the power fan connector on the system board. See
"Locating parts on the system board" on page 77.
5. Release the two tabs
remove the front fan from the chassis.
Figure 41. Removing the front fan assembly
.
Chapter 8
Replacing FRUs (Machine Types: 0268, 1730, 4166, 4169, 5030, 5034, 5037, 5048, 5069, and 7517.)
1
that attach the front fan assembly to the chassis as shown and then completely
107
- Quick Links:
- For Machine Types: 0268, 1730, 4166,...
Hide quick links:
Advertisement
Table of Contents
