hit counter script

Introduction; Quick Start; System Overview - HP Rx2620-2 - Integrity - 0 MB RAM Manual

Integrity servers with microsoft windows server 2003
Hide thumbs Also See for Rx2620-2 - Integrity - 0 MB RAM:
Table of Contents

Advertisement

1 Introduction

A cell-based HP Integrity server (such as the rx7620, the rx7640, the rx8620, the rx8640, or
Superdome) can be configured as a single system or partitioned into several independent systems.
Partitioning provides hardware and software isolation, in which each partition is assigned
memory, processors, and I/O resources for its exclusive use, and executes its own operating
system image. This chapter introduces node partitions (nPartitions) on cell-based HP Integrity
servers running Microsoft® Windows® Server 2003 and describes the tools to manage them.

Quick Start

This section provides an overview of the installation and configuration steps needed to get you
up and running as quickly as possible.
Figure 1-1
shows the hardware, software, and most commonly used connection method. All
components are described in greater detail later in this chapter.
Figure 1-1 System overview
The most common setup for nPartition management of HP Integrity servers running Windows
involves a remote management station. This dedicated management station hosts the management
tools and issues commands over a network connection to the server's management processor,
enabling you to manage the complex even if no nPartitions exist on the complex yet.
To set up and configure the management station:
1.
Establish a dedicated management station for the HP Integrity server. See
management station" (page
2.
Install the nPartition tools. See
media" (page 31)
(page
32).
3.
Verify installation of the management software. See
Partition Manager
nPartition Commands
MP Commands
management station
22).
"Install nPartition Commands Bundle from the Smart Setup
and
"Install the Partition Manager Bundle from the Smart Setup media"
CPU
CPU 0
CPU 1
CPU 2
CPU 3
M e m o r y
Partition 0
Optional
Cell Board
Chipset
Partition 1
PDCA B1
BPS 1
PDCA B0
BPS 0
Cell 0 Core I/O
Console
IPMI / LAN
LAN
DVD / DDS
L V D
SC S I
M odem
Cons ole
u320 Disk S lot
UPS
1000t
LA N
u320 Disk S lot
1
2
3
4
5
8
HP Integrity rx8620 server
"Verifying the installation" (page
Optional Cell
Board
HP-UX
Partition 0
Optional
Cell Board
Windows
HP
S X 1000
Partition 1
BPS3
BPS5
PDCA A1
PDCA A0
BPS2
BPS4
rx8620
Cell 1 Core I/O
Console LAN
DVD / DDS
L V D
SC SI
M ode m
Cons ole
u320 Disk S lot
UPS
1000t
LA N
u320 Disk S lot
6
7
1
2
3
4
5
6
7
8
"Setting up the
Quick Start
33).
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bl860cNpartition

Table of Contents