Debug Dot1X - Cisco 4500M Command Reference Manual

Command reference

Hide thumbs Also See for 4500M:

Table of Contents

debug dot1x

To enable debugging for the 802.1x feature, use the debug dot1x command. Use the no form of this

command to disable debugging output.

Syntax Description

state-machine

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Related Commands

undebug dot1x (same as no debug dot1x)

Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW

debug dot1x {all | errors | events | packets | registry | state-machine }

no debug dot1x {all | errors | events | packets | registry | state-machine }

Enables debugging of all conditions.

Enables debugging of print statements guarded by the dot1x error flag.

Enables debugging of print statements guarded by the dot1x events flag.

All incoming dot1x packets are printed with packet and interface information.

Enables debugging of print statements guarded by the dot1x registry flag.

Modification

Support for this command was introduced on the Catalyst 4500 series switch.

Cisco IOS Commands for the Catalyst 4500 Series Switches

Ws-c4507r 4500 series