FUNCTION (continued)
Audio Switching
NICAM / Sound Multiplex(including A2) (TV mode)
You can make optimum use of available audio by pressing
if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when
only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is
available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary
on a game as primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM
signals, NICAM display will appear.
Each time
button is pressed, the display is switched in the sequence of following.
Sound multiplex signal received
NICAM signal received
[I]...Main language/Primary Sound
[II]...Sub language/Secondary Sound
▼...force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Also, when receiving NICAM signals, NICAM display will appear.
Press
button to switch between stereo and mono sound.
Sound multiplex signal received
NICAM signal received
...Stereo
.....Force Mono
NOTE
Please select ▼(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that
you can receive a clear mono sound.
represents the Mono broadcast.
button of remote control. Audio can be switched only
Yellow
[ ]
Yellow
NICAM[ ]
Red
NICAM
Red
Yellow
[ ]
Yellow
NICAM[ ]
Green
Green
Green
Green
67