Advertisement
IMPORTANT
Experience
indicates
that a lcohol
blended fuels (called gasohol orusing
ethanol ormethanol)
can attract mois-
ture which l eads t oseparation
and
formation
ofacids d uring storage.
Acidic g as can damage the fuel sys-
tem ofanengine while instorage. To
avoid e ngine problems,
empty the fuel
system b efore storage for30days or
longer. Drain the gas tank, start the en-
gine and let i trun until the fuel l ines a nd
carburetor
are empty. Use fresh f uel
next season. Never use engine orcar-
buretor cleaner products inthe fuel
tank orpermanent
damage may oc-
cur. S ee the STORAGE
section for
additional
information.
HOW TOSTOP
Y OUR UNIT
• To stop the engine, move the
ON/OFF switch to the OFF position.
"__
ON/OFF
witch
Throttle Tr_igg_er_"
HOW TO START YOUR UNIT
.,&
_
_WARNIN_I:
The trimmer head
will turn while starting the engine.
Avoid any contact with the muffler. A
hot muffler can cause serious burns.
NOTE:
DO NOT squeeze
the throttle
trigger until the engine has started and
runs.
1. Set unit on a flat surface.
2.
Move ON/OFF switch to the ON
position.
3.
Slowly press the primer bulb 6
times.
4.
Move the start lever to the START
position.
Start Lever
Muffler
Primer
Bulb
5.
Pull starter rope handle sharply
until engine starts and runs.
6. Allow unit to run for 10-15 seconds,
then fully squeeze the throttle trigger
to disengage the starting system.
OPERATING
THE COUPLER
This model is equipped with a coupler
which enables
optional attachments
to
be installed.
The optional attach-
ments are:
Edger .................
358.792400
Cultivator
..............
358.792410
Blower
................
358.792421
Brushcutter
............
358.792430
WARNING:
Always stop unit
and disconnect
spark plug before re-
moving or installing
attachments.
11
Advertisement
