Automatic Programmes - AEG BS7304001 User Manual
Electrolux
Hide thumbs
Also See for BS7304001:
- User manual (36 pages) ,
- User manual (36 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
14 www.aeg.com
symbol and the time setting flash
in the display. The appliance deacti-
vates.
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
6.
Deactivate the appliance.
7.4 Check result (selected
models only)
If you set the END or DURATION func-
tion, two minutes before the end of
cooking an acoustic signal sounds and
the lamp activates. The appliance goes
to the setting of the END or DURATION
function. During these two minutes you
can examine the results of the cooking,
and, if necessary, add the END or DURA-
TION time.
7.5 Setting the SET+GO
1.
Set an oven function (or programme)
and temperature (refer to "Setting
the oven function" and "Changing
the temperature").
2.
Set the DURATION (refer to "Setting
the DURATION").
3.
Touch
flashes in the display.
4.
Touch
tion.
The display shows
indicator. This indicator shows which
clock function is activated.
5.
Touch a sensor field (apart from
ON / OFF) to start the SET+GO
function.
You can use the SET+GO func-
tion only when the DURATION is
set.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
again and again until
to set the SET+GO func-
and
7.6 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation
of the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1.
Touch
display.
2.
Use
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
starts automatically after five sec-
onds.
4.
When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and
5.
Touch a sensor field or open the
oven door to stop the acoustic sig-
nal.
7.7 Setting the Time delay
function
The DURATION
tions can be used at the same time, if
the oven is to be activated and deactiva-
ted automatically later. In this case, first
set the DURATION
function (refer to "Setting the DURA-
with an
TION" and "Setting the END" ).
When the Time delay function is activa-
ted, the display shows a static symbol of
the oven function,
The dot shows which clock function is on
in the Clock / residual heat display.
8.1 RECIPE MENU
The display shows the shelf posi-
tion and the default cooking
times for all automatic recipes.
.
and "00" flash in the
or
to set the MINUTE
or the MINUTE MINDER
flash in the display.
and END
and then the END
with a dot and
func-
.
- Quick Links:
- Control Panel
- Care and Cleaning
- Installation
Hide quick links:
Advertisement
Table of Contents
