1. The Basics Front View of Your Phone 1. Earpiece 1 0 - 4 R e a d y O c t 1 7 , 0 5 ( M o n ) 1 0 : 3 0 a m 2. Main LCD 10-4 3.
Page 10
Key Features 1. Earpiece lets you hear the caller and automated prompts. 2. Main LCD (display) displays the phone’s main menu, features, modes, etc. 3. Softkey (left) lets you select the menu corresponding to the bottom left line on the Main LCD. 4.
Page 11
17. Speaker lets you hear different ringers and sounds. You can mute the ringer when receiving incoming calls by pressing , or any of the side keys. 18. LED Indicator shows your phone’s connection status at a glance. 19. Sub LCD lets you monitor the phone’s status and see who’s calling without opening the phone.
Viewing the Display Screen This list identifies the symbols you’ll see on your display screen. shows your current signal strength. The more lines you have, the stronger your signal. means your phone cannot find a signal. indicates the call is on hold. indicates a call is in progress.
Page 13
shows the level of your battery charge. The more black you see, the more power you have left. indicates your battery is charging. indicates you have menus to scroll (in four directions). indicates the vibrate feature is set to ON. indicates volume level 4 or 1 and vibrate feature are set to indicates a beep sounds once when you receive a phone call or message, etc.
Turning Your Phone ON and OFF Turning Your Phone ON To turn your phone on, press Once your phone is ON, it displays “Looking for service...” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode. At this point, you are ready to begin making and receiving calls.
Using the Battery Installing the Battery To install the LiIon battery: To install, insert the battery into the opening on the back of the phone and gently press down until the latch snaps into place. Removing the Battery To remove your battery: 1.
Page 16
Charging the Battery Your phone comes with a rechargeable battery. You should charge the battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off and you will lose all the information you were just working on.
Displaying Your Phone Number 1. Press to access the main menu. 2. Highlight Contacts and press 3. Highlight My Phone# and press Note: To access the phone’s main menu, press from standby mode. Menu items may be selected by highlighting them with the navigation key and pressing , or you can press the number corresponding to the menu item on your keypad.
Making and Answering Calls Making Calls To place a call using your keypad: 1. Make sure your phone is on. 2. Enter a phone number from standby mode. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.) 3.
Page 19
To place a call with the flip closed: 1. Make sure your phone is on. 2. Press and hold on the right side of the phone. 3. Follow the system prompts. (The call will be made in speakerphone mode, unless you have a headset attached to the phone.) Redial to redial the last number you called.
Dialing Options Dialing options are displayed when you press (right Options softkey) after entering numbers in standby mode. To select an option, highlight it and press Call to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode.
Answering Calls To answer an incoming call with the flip open: 1. Make sure your phone is on. If your phone is off, incoming calls go to voicemail. 2. Press to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any number key.
Page 22
The following options are also displayed by pressing Options (right softkey). To select an option, highlight it and press Answer to answer the call. Answer:Speaker to answer the call in speakerphone mode. Answer on Hold to put the call on hold. (See “Setting Answer on Hold”...
Page 23
Setting Answer on Hold This feature allows you to hold an incoming call when you cannot answer immediately. To set Answer on Hold: 1. When you receive an incoming call, press Options (right softkey). 2. Highlight Answer on Hold and press .
Using the Speakerphone The speakerphone feature lets you hear audio through the speaker and talk without holding the phone. When the speakerphone is activated, use the Side Up/Down key or press the navigation key up or down to adjust the volume. To turn the speakerphone on during a call: Press –...
Adjusting Volume During a Conversation Whether you need to hear more or less of a conversation, adjust the Side Up/Down key or press the navigation key up or down during a call. Muting a Call To mute a call: (right softkey), highlight Mute, and press Press Options (When the phone is muted, “Muted”...
Calling Emergency Numbers You can place calls to 911 (dial and press WXYZ even if your phone is locked or your account is restricted. Once the dial is made, you will enter Emergency mode. To select an option, press Options (right softkey), highlight it, and press Options:...
In-Call Options During a call, your phone displays menu options by pressing Options (right softkey). To select an option, highlight it and press Flash to answer an incoming call while putting the current call in Call Waiting or connect a third party for a Three-Way Call. Mute to mute your phone’s microphone.
End-of-Call Options Options To display the following options, press (right softkey) within 10 seconds after disconnecting a call. To select an option, highlight it and press Call Again to dial the phone number. Call:Speaker On to dial the phone number in speakerphone mode.
Finding a Phone Number You can search Contacts list entries for phone numbers that contain a specific string of numbers. 1. Enter the last four or more digits of the number and press Options (right softkey). The more numbers you enter, the more specific the search becomes.
Dialing From the Contacts Directory 1. Press to access the main menu. 2. Highlight Contacts and press 3. Highlight Find/Add Entry and press Shortcut: Press the navigation key right to list entries. 4. Use your navigation key to scroll through the Contacts list and highlight one of the appropriate entries and press 5.
Using One-Touch Speed Dialing With this feature, you can dial Speed Dial entries using one key press for locations 2-9. (See page 69 for storing a Speed Dial number.) To use speed dial for voice calls: From standby mode, press and hold the appropriate key for approximately two seconds.
Selecting a Character Input Mode Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when sending Email, text, picture or video messages). 1.
Entering Characters Using T9 Text Input T9 Text Input lets you enter text in your phone by pressing keys just once per letter. (To select the T9 Word mode when entering text, see “Selecting a Character Input Mode” on the previous page.) T9 Text Input analyses the letters you enter using an intuitive word database and creates a suitable word.
Page 34
To edit or erase the words you have added: 1. Follow steps 1-4 on page 26. 2. Highlight My Words and press 3. Highlight your desired word and press Options (right softkey). 4. To select an option, highlight it and press Edit to edit a word in My Words.
Entering Characters Using the Keypad To enter characters using the keypad, select the Alphabet mode (see “Selecting a Character Input Mode” on page 25). Press the corresponding key until the desired character appears. By default, the first letter of a word is capitalized and following letters are lowercase.
2. Your Phone’s Settings Reminder: To access the phone’s main menu, press from standby mode. Menu items may be selected by highlighting them with the navigation key and pressing Sound Settings Selecting Ringer Types for Voice Calls Select a ringer type for voice calls so that you can recognize when a certain type of call is coming in: To select a ringer type for voice calls: 1.
Page 37
Selecting Ringer Types for 10-4 Calls 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Sounds and press 4. Highlight Ringer Type and press 5. Highlight 10-4 and press 6. Highlight 10-4 Calls, 10-4 Missed, or 10-4 Floor Tone, and press 7.
Selecting a Tone Length 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Sounds and press 4. Highlight Others and press 5. Highlight Tone Length and press 6. Highlight Short or Long and press Setting a Start-up/Power-off Tone 1.
Adjusting the Phone’s Volume Settings To adjust the ringer/key volume: 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Sounds and press 4. Highlight Ringer/Key Vol. and press 5. Select the menu you wish to change and press 6.
Alert Notification Your phone comes with several different options to keep you aware of what’s going on by sounding the alert or ringer. Service sets alert On or Off for network services parameter changes. 10-4 sets an alert to notify you of 10-4 calls. Select 10-4 Calls for incoming 10-4 calls, or 10-4 Missed for missed 10-4 calls.
Silence All 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Sounds and press 4. Highlight Ringer/Key Vol. and press 5. Highlight Ringer Volume and press 6. Press the navigation key down until “Silence All” appears on the display and press To deactivate this feature, select a volume level you wish during step 6 above.
Display Settings Changing the Greeting To display or change your custom greeting: 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Display and press 4. Highlight Greeting and press 5. Highlight Custom and press 6. Customize the greeting using your keypad. (See “Selecting a Character Input Mode”...
Changing the Display Screen Your new phone offers animation for what you see on the display screen when in Standby mode, Outgoing Calls or Service Search. 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Display and press 4.
6. Select your desired item and press Screen Saver selects the screen saver to display. Calendar displays the Calendar. (Main LCD only.) Digital Clock displays the local time in digital view. Analog Clock displays the local time in analog view. World Clock displays the time of the selected city or country along with the local time.
Changing the Phone’s Menu Style 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Display and press 4. Highlight Main Menu and press 5. Select either Graphic or Text and press Changing the Display for My Buddy This feature enables you to see a funny animation on the Main LCD by opening the flip.
Changing the Font Size 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Display and press 4. Highlight Font Size and press 5. Highlight either Messaging or Browser and press 6. Select your desired font size and press Tip: From the preview display, you can switch your desired font size by pressing the navigation key right or left.
Location Settings Your phone is equipped with a Location feature which will allow the network to detect your position, making some applications easier to use. Turning Location off will hide your location from everyone except 911. Note: Even if the Location feature is enabled, no service may use your location without your expressed permission.
TTY Use A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf or hard of hearing, or who have speech or language disabilities, to communicate via a telephone. Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission.
Airplane Mode When your phone is in Airplane mode, it cannot send or receive any calls (except for 911 dialing) or access online information. You may still use the phone’s other features, such as Voice Memo, Calculator, Calendar, etc., while you are in Airplane mode. 1.
Phone Setup Options My Shortcut Your phone offers you the option of assigning a shortcut key to a favorite or often-used function. Pressing the navigation key left in standby mode will launch your user-defined shortcut. To assign your shortcut key: 1.
Auto Answer Mode This feature sets the phone to automatically pick up incoming calls in speakerphone mode or car kit/headset mode (when connected). 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Others and press 4.
Headset Mode This feature allows you hands-free phone use. Set the headset mode to Voice Call or 10-4 and press the Turbo Button (the operation button) on the headset to activate useful functions. To connect the headset: Simply plug the headset into your phone’s headset jack. To set headset mode: 1.
To set the sound mode: 1. Follow the steps 1 to 4 on page 45. 2. Highlight Earpiece and press 3. Select Stereo or Mono and press To set the ringer audio: 1. Follow the steps 1 to 4 on page 45. 2.
Setting Message Notification You can set your phone to display an icon and message notification or just display an icon notification when you receive a text message or voicemail. 1. Press to access the main menu. 2. Highlight Settings and press 3.
Editing Canned Messages Your phone can store canned messages for use with text messaging. You can edit your phone’s default canned messages through the Settings menu. To edit a canned message: 1. Press to access the main menu. 2. Highlight Settings and press 3.
Setting Your Callback Number With this feature, you can send a callback number with your text message. 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Messaging and press 4. Highlight Send Callback# and press 5.
Setting Your Signature This feature allows you to send a message with your signature. 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Messaging and press 4. Highlight Signature and press 5. Press , select On, and press 6.
To activate the Close Flip feature: 1. From step 5 on page 50, select Close and press . (You will see a message on the display.) 2. Press (left softkey) to continue. 3. Select an option from the following and press End to end the call.
Setting Up Key Press Echo With this feature, your phone echoes the number when you press the keypad. This feature is available when you are in standby mode. 1. Press to access the main menu. 2. Highlight Settings and press 3.
3. Security Accessing the Security Menu You must enter your lock code to view the Security menu. 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Security and press 4. Enter your lock code. Tip: If you can’t recall your lock code, try using the last four digits of your phone number or 0000.
Unlocking Your Phone 1. Press (left softkey). Unlock 2. Enter your lock code. Locking the Pictures and Videos Menu With this feature, you must enter your lock code when you access the Pictures and Videos menu. 1. From the Security Menu, highlight Lock Pic&Video and press 2.
Calling in Lock Mode You can place calls to 911, Customer Service, and to your special numbers when in lock mode. To place an outgoing call in lock mode: To call an emergency number, special number, or Customer Service, enter the phone number and press Restricting Calls You can restrict phone numbers your phone dials or receives.
Using Special Numbers You can save three special numbers in addition to your Contacts entries (the same number may be in both directories). You can make and receive calls from special numbers even when your phone is locked. To add or replace a special number: 1.
Resetting Your Pictures Account This option resets your authentication ID for your picture account. 1. From the Security Menu, highlight Reset Pictures and press 2. Press (left softkey) to continue. 3. If you are certain that you would like to reset your pictures account, highlight Yes and press After resetting, you are prompted to reenter the password when you use Online Pictures.
4. Roaming Understanding Roaming Recognizing Icons on the Display Screen Your phone’s display screen always lets you know when you’re off the home network and whether your phone is operating in analog or digital mode. The following chart indicates what you’ll see depending on where you’re using your phone.
Note: When using your phone in analog mode, the handset may feel warm. This behavior is normal for analog operation. Setting Your Phone’s Roam Mode Your phone allows you to control your ability to roam. By using the Roaming menu option, you can determine which signals your phone accepts.
5. Menu Navigation Viewing the Menus Menu Diagram Menus let you check or change your phone settings. The following outline shows your phone’s menu structure. 1. Call History 1. Outgoing 2. Incoming 3. Missed 4. Erase History 2. Contacts 1. Find/Add Entry 2.
Page 68
6. Downloads Games Ringers Screen Savers Applications Dynamic 1-11 (If applicable) Others (If applicable) 7. Media Player 8. Settings 1. Sounds 2. Display 3. Internet 4. 10-4 5. Location 6. Roaming 7. Messaging 8. Security 9. Others 0. Phone Info 9.
6. Managing Call History Viewing History You’ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) and the last 10 10-4 calls for each call or 10-4 call that you placed, accepted, or missed.
Making a Call From Call History 1. Press to access the main menu. 2. Highlight Call History and press 3. Highlight Outgoing, Incoming, or Missed and press 4. Highlight the entry you want to call by scrolling through the list. 5.
Prepending a Phone Number From Call History If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prepending by following these steps: 1. Press to access the main menu. 2.
7. Contacts Directory Displaying the Contacts List Press the navigation key right. – or – 1. Press to access the main menu. 2. Highlight Contacts and press 3. Highlight Find/Add Entry and press Adding a New Contacts Entry Your phone can store up to 300 Contacts entries. Contacts entries can store up to a total of 500 phone numbers and each entry’s name can contain 16 characters.
Finding Contacts List Entries There are several ways to display your Contacts entries: by name, by speed dial number, by 10-4 list, and by voice dial numbers. Follow the steps outlined in the sections below to display entries from the Contacts list menu. Finding Names To find Contacts list entries by name: 1.
Page 74
Finding Speed Dial Numbers 1. Press to access the main menu. 2. Highlight Contacts and press 3. Highlight Speed Dial #s and press . (The Speed Dial numbers list appears.) Finding Voice Dial Numbers 1. Press to access the main menu. 2.
Contacts List Entry Options To access Contacts options, display the entry list, highlight an entry and press , then select a phone number and press (right softkey). To select an option, highlight it and Options press Edit to edit your desired label. Call to dial the phone number.
Assigning Speed Dial Numbers With this feature you can dial Contacts Directory entries with one key press for locations 2-9. Save your memory locations 2-9 for speed dialing your most commonly used phone numbers. Speed Dial numbers must be stored in your Contacts to use this feature. To set Speed Dial: 1.
Editing a Contacts Entry 1. Press the navigation key right. 2. Highlight the entry you wish to edit and press 3. Highlight a phone number, press (right softkey), Options highlight Edit, and press – or – Highlight an email address or Web address and press Edit (right softkey).
Selecting a Ringer/Image Type for an Entry You can assign a ringer/image type to a Contacts entry so you can identify the caller by the ringer or image type. To select a ringer type for an entry: 1. Press the navigation key right. 2.
Secret Contacts Entries You can hide an entry’s phone number(s) by making them secret, which requires your lock code to edit the entry. The entry name is still displayed, but the entry’s phone numbers are replaced by “<Secret>”. 1. Press the navigation key right. 2.
8. Personal Organizer Managing Schedules Calendar Use the Calendar to remind you of events or important calls you need to make. You can schedule up to 100 events, 15 Call Alarms and 20 To Do Items. Displaying Your Calendar 1. Press to access the main menu.
Adding an Event to the Scheduler 1. From the Calendar display, highlight the day you want to add an event by using the navigation key and press 2. Press (right softkey) to display the options. Options 3. Highlight Add Event and press 4.
Event Alerts There are several ways your phone alerts you of scheduled events. By playing the alert tone (depending on the Alert and Ringer Volume setting). By blinking the LED. By displaying the event’s description on the Main LCD when the flip is open.
Adding a Call Alarm to the Scheduler 1. From the Calendar display, highlight the day you want to add an event by using the navigation key and press 2. From the event list display, press (right softkey) to Options display the options. 3.
Call Alarm Menu When your phone is turned on and you have scheduled a call alarm, your phone alerts you and displays the icon and the name or phone number. To respond to a call alarm: Press to dial the phone number. Other options available include: Press to make a 10-4 call (if applicable).
Viewing a Future/Past Day ’s Scheduled Events 1. From the Event list display, press (right softkey). Options 2. Highlight Go To Date and press 3. Enter the date by using numeric keys and the navigation key and press (left softkey). 4.
Deleting Items from the To Do List 1. From the To Do List display, highlight the item you want to erase and press (right softkey). Options 2. Highlight your desired option and press Erase Item erases an item from the To Do List. Erase Selection erases the selected To Do items all at one time.
Displaying Phone Information 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight Phone Info and press 4. Highlight My Phone# and press Finding Icon Definition 1. Press to access the main menu. 2. Highlight Settings and press 3.
Using Your Phone’s Tools Setting the Alarm Clock To set the alarm clock: 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Alarm Clock and press Tip: Ringer Length Press (right softkey) to set the Settings Snooze Interval 4.
Using the Calculator 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Calculator and press 4. Enter numbers using your keypad. Press the left softkey to insert a decimal point. 5. Press the appropriate navigation key for an arithmetic option. (Up for addition, Down for subtraction, Left for multiplication, Right for division) 6.
Using the Stop Watch To start the stop watch: 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Stop Watch and press Press (left softkey) to start the stop watch. Start Press (left softkey) to stop the stop watch. Stop Press (left softkey) to start the stop watch again.
9. Voice Services Using Voice-Activated Dialing You can use a Voice Dial tag to automatically dial a phone number in your Contacts list. Your phone can store up to 30 Voice Dial tags. (To create a Voice Dial tag, see “Programming Voice Dial Tag to Your Phone”...
9. Select the phone number you want to program and press (The display shows “Voice Dial Recorded”.) Note: Record Voice Dial tags in a quiet environment and without the aid of an accessory. Reviewing Voice Dialing Tags 1. Press to access the main menu. 2.
Managing Voice Memos You can use your phone’s Voice Services to record brief memos during a call. Recording Voice Memos To record a voice memo: 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Voice Services and press 4.
When the recording capacity is full, highlight an old memo, (left softkey), highlight Yes, and press press to make Erase room for additional memos. Note: Your phone can store up to 12 memos and the total available recording time is 72 seconds (maximum of 18 seconds per memo). Reviewing Voice Memos 1.
Erasing Voice Memos To erase all voice memos: 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Voice Services and press 4. Highlight Voice Memo and press 5. Highlight Erase All and press 6. Highlight Yes and press To erase an individual memo: 1.
Setting Up Screen Call This feature enables you to answer incoming calls by using pre- recorded announcements, either one that is pre-recorded or one that you record. You can also record the caller’s message into the Voice Memo list. To listen to the message, see “Reviewing Voice Memos”on page 87.
Page 97
Selecting an Announcement for Screen Call 1. Press to access the main menu. 2. Highlight Tools/Extras and press 3. Highlight Voice Services and press 4. Highlight Screen Call and press 5. Highlight Announcement and press 6. Depending on your preference, highlight Pre-Recorded or Custom, and press Recording Name for a Pre-Recorded Announcement 1.
Page 98
Recording a Customized Announcement 1. Follow steps 1-5 on the previous page. 2. Highlight Custom and press (right softkey). Edit 3. Highlight Record and press If your announcement has already been recorded, select Yes or No for overwriting. 4. Press to start the 1st recording.
10. 10-4 10-4 allows you to enjoy quick, two-way, “walkie-talkie-style” communication with your friends, family, and co-workers. You can make 1-to-1 or 1-to-many calls (up to 5 others on the same call) to any other 10-4 user, anywhere on the Network. You can make and receive 10-4 calls when your phone displays .
Displaying the 10-4 List From standby mode, press (left softkey) or the 10-4 10-4 button on the side of your phone ( ) to access the 10-4 List. Tip: The first time you access the list, the 10-4 Help message will appear. Press (left softkey) and (left softkey) to read a brief introduction...
Making a 10-4 Call (1-to-1 Call) You can place a 1-to-1 10-4 call by entering a 10-4 number or by selecting a contact from the 10-4 List. 1. Press (left softkey) or press to access the 10-4 List. 10-4 2. Press (left softkey), highlight the list from which you Go to want to place a call (Company List, Personal List, Outgoing,...
Making a 10-4 Call (Group Call) You can make a 10-4 call to all members in a Group entry, which you have in your 10-4 List. You can communicate with up to five members at a time. 1. Press (left softkey) or press to access the 10-4 List.
Making a 10-4 Call by Entering a Number 1. From standby mode, enter the 10-4 number you want to dial. 2. Press to place the 10-4 call. The contact’s name appears if there is a matched number in your 10-4 List. 3.
Receiving a 10-4 Call 1. Make sure your phone’s 10-4 mode is enabled (see “Setting 10-4 Mode” on page 92). 2. When you receive a 10-4 call from a contact, “10-4 Call,” the contact’s name, and the 10-4 number appear on the display. When you receive a group call, “Group Call”...
10-4 Options When you use 10-4, several user options are available by pressing Options (right softkey). To select an option, highlight it and press Copy to Personal to copy a contact to the Personal List. Copy Group appears when you highlight a group. (This option doesn’t appear if the entry is already in the Personal List or when you select Personal List/Personal Groups.) Edit to edit a 10-4 number and/or name.
Copying an Entry to Personal List or Personal Group List You can copy an entry to your Personal List/Personal Groups from several different sources. If the selected entry is already stored in the Personal List/Personal Groups, the “copy” option does not appear. 1.
Saving a 10-4 Number You can save a 10-4 number from the ending display to your Personal List/Personal Groups. 1. From the ending display, press (right softkey). Save 2. Enter a name and press 3. Press (left softkey). Save 4. Press (left softkey).
Adding a New Contact to Your Personal List You can store the total of 200 entries in the Personal List/ Personal Groups. 1. Press (left softkey) or press to access the 10-4 List. 10-4 2. Press (left softkey), highlight Personal List, and press Go to 3.
Adding a New Group to Your Personal Group List You can add new groups to the Personal Group List. Each group can include up to five members. You can enter a group member directly, or select the member from the Company List or Personal List.
Editing a Contact in Your Personal List 1. Follow steps 1-2 in “Adding a New Contact to Your Personal List” on page 101. 2. Highlight the entry you want to edit and press (right Options softkey). 3. Highlight Edit and press 4.
Page 111
Options: Edit to edit a group member’s name and 10-4 number. Erase to erase the group member. Add New to add a new group member in the Personal Group List. Add (Company) to add a new group member from the Company List.
Erasing an Entry in Your Personal List or Personal Group List To erase a contact or a group: 1. From the 10-4 List, press (left softkey), highlight Go to Personal List or Personal Grps., and press 2. Highlight the entry you want to erase and press (right Options softkey).
Erasing a 10-4 List You can erase all entries saved in the 10-4 List (except Company List/Company Groups). 1. From the 10-4 List, press (right softkey). Options 2. Highlight Erase 10-4 List and press 3. Highlight your desired option and press Options: Outgoing to erase all outgoing 10-4 calls.
Setting Speed Dialing for 10-4 Entries 1. Press to access the main menu. 2. Highlight Contacts and press 3. Highlight Speed Dial #s and press 4. Highlight an unassigned number and press 5. Press (left softkey), highlight the list from which you Go to want to set a speed dial (Company List, Company Grps., Personal List, or Personal Grps.) and press...
Setting Ringer Types for 10-4 Calls 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight 10-4 and press 4. Highlight Sounds and press 5. Highlight Ringer Type and press 6. Highlight 10-4 Calls, 10-4 Missed, or 10-4 Floor Tone and press 7.
Setting the Speakerphone for 10-4 Calls 1. Press to access the main menu. 2. Highlight Settings and press 3. Highlight 10-4 and press 4. Highlight Speakerphone and press 5. Select On or Off and press Note: If the phone’s ringer volume is set to Vibrate, Ringer off, or Silence All, the speakerphone turns off.
11. Messaging New Messages To read a message: When you receive new messages, the message notification and icon will appear. Press (left softkey) to display the View message details. To reply to a message: 1. While the message is open, select (left softkey).
Page 118
To displayWeb Alerts: 1. Press to access the main menu. 2. Highlight Messaging and press 3. Highlight Web Alerts and press 4. Highlight the header of the message you want to see and press . (To display the web alerts options, press Options [right softkey].) To read other messages:...
Sending a Text Message 1. Press to access the main menu. 2. Highlight Messaging and press 3. Highlight Send Message and press 4. Select Text and select the entry method you prefer: Phone Book Entry to select recipients from your Contacts list. Highlight the box next to an entry and press to select.
Page 120
7. Use your keypad to enter a text message (or press the right softkey to select from Canned Messages, Recent Messages, or Signature) and press (left softkey). Tip: Canned Messages See page 48 for 8. To set the message priority, select the box under Priority and press 9.
12. Using your Phone’s Camera Taking Pictures Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate the phone’s camera mode whether the phone is open or closed. To take a picture with the phone open: 1.
Page 122
Set as to assign the picture. Select Picture ID or Screen Saver and press Display/Edit to edit or display your picture’s details. (See “In Camera Folder Options” on page 125 for details.) Delete to delete the picture you just took. Pics In Camera to go to the In Camera folder to review your saved pictures.
Creating Your Online Picture/Video Messaging Password The first time you use any of the picture/video management options involving the online picture/video messaging web site, you will need to establish an online picture/video messaging password through your picture/video messaging enabled phone. This password will also allow you to sign in to the online https://mypictures.bell.ca picture/video messaging web site at access and manage your uploaded pictures/videos and albums.
Camera Mode Options When the phone is open and in camera mode, press Options (right softkey) to display additional camera options: Picture Mode to select picture mode from Normal, Night/Dark, Beach/Snow, Scenery, or Soft Focus. Flash to activate the flash. (See “Setting the Flash” on page 118 for details.) Zoom to zoom in on a subject.
Page 125
Setting the Flash To activate the flash: 1. From camera mode, press (right softkey). Options 2. Highlight Flash and press 3. Select one of the following options and press Off to deactivate the flash. On This Shot to activate the flash for one shot. On Always to activate the flash for all pictures.
Page 126
Taking Multiple Shots This feature allows you to take up to nine continuous shots of one moment. When you take multiple shots, the icon will appear in the viewfinder. To take multiple shots: 1. From camera mode, press (right softkey). Options 2.
Page 127
Taking Stitch Shots Stitch shot allows you to stitch separate images together. With this feature, your phone’s viewfinder is divided in two and you can shoot each part separately. When you shoot the first part, the camera displays a section of the first part, so you can line up the next picture with the first one.
Page 128
Using the Mini-Flashlight This function allows you to use the phone’s camera flash as a miniature flashlight. To use this function, your phone must be in standby mode with the Side Key Guard unlocked. (See page 51 for the Side Key Guard.) To use the mini flashlight: With the flip closed and in standby mode, press and hold the Side Up/Down key (...
Selecting Camera Settings To select your camera settings: 1. From camera mode, press (right softkey). Options 2. Highlight Camera Settings and press 3. Select one of the following options and press Resolution to select a picture’s file size (High-640x480, Medium-320x240, or Low-160x120). Quality to select the picture quality setting (Fine, Normal, or Economy).
Viewing Your Camera’s Status Area Display Camera Icon Indicators Function Icons Details On This Shot To use the flash for only one shot. On Always Flash To use a flash every time you take a picture. Auto To use the auto flash function. Sunny Use this setting for sunny weather.
Storing Pictures Your phone’s picture storage area is called My Pictures. There are two types of folders in My Pictures that can be used separately according to your needs: In Camera (see below) Saved to Phone (see page 127) In Camera Folder Once a picture is taken, it is automatically saved to the In Camera folder.
In Camera Folder Options When you are viewing the In Camera folder, press (right Options softkey) to display the following options: Expand to switch to the Expand view mode. Thumbnail to switch to the Thumbnail view mode. Upload to Albums to upload pictures from the In Camera folder to the online picture/video messaging web site.
Page 133
Display/Edit to display the following options: Special Effects to apply special effects on your pictures. You can select from Color Tone, Fun Stamps, or Rotate. Text Caption to edit the selected picture’s caption. Picture Info to display information such as the picture’s caption, time/date, and size.
Saved to Phone Folder When you assign a picture, it will automatically be saved in the Saved to Phone folder. The Saved to Phone folder allows you to store copies of pictures on your phone and to assign pictures to various phone tasks.
Saved to Phone Folder Options When you are viewing the Saved to Phone folder, press Options (right softkey) to display the following options: Set as to assign the picture. Select Picture ID or Screen Saver and press Display/Edit to edit or display your picture’s details. (See “In Camera Folder Options”...
Recording Videos In addition to taking pictures, you can also record, view, and send videos to your friends and family with your phone’s built-in video camera. To record a video: 1. Press to access the main menu. 2. Highlight Picture&Video and press 3.
Page 137
To take a video with the flip closed: 1. Press and hold the side camera key to activate camera mode. 2. Press and hold the side camera key to activate video mode. 3. Point the camera lens at the desired subject. Note: When taking a video with the phone closed, the subject image appears in reverse on the external display.
Video Mode Options Several options are available from video mode. Press (right softkey) to display additional options: Options Video Mode to select video mode from Normal, Night/Dark, Beach/Snow, Scenery, or Soft Focus. Video Light to select a Video Light setting. Select On to light the video light.
Selecting Camcorder Settings To select your camcorder settings: 1. From video mode, press (right softkey). Options 2. Highlight Camcord.Settings and press 3. Select an option from the following and press Resolution to select a file size (Good-176x144 or Medium-128x96) for a video. Video Quality to select video quality from Rich-15sec., Normal-20sec., or Economy-30sec.
Storing Videos Your phone’s video storage area is called My Videos. There are two types of folders in My Videos that can be used separately according to your needs: In Camcorder (see below) Saved to Phone (see page 136) In Camcorder Folder Once a video is recorded, it is automatically saved to the In Camcorder folder.
In Camcorder Folder Options When you are in the In Camcorder folder, several options are available. Press (right softkey) to display the following Options options: Expand to switch to the Expand view mode. Thumbnail to switch to the Thumbnail view mode. Send Video to send video files.
Page 142
Note: Upload to Albums Save to Phone copy videos from your phone’s In Camcorder folder to your Saved to Phone folder or your online picture/video messaging account. Videos that have been stored in your Saved to Phone folder or uploaded to your online account will remain available in the In Camcorder folder until you erase them.
Saved to Phone Folder When you assign a video, it will automatically be saved in the Saved to Phone folder. The Saved to Phone folder allows you to store copies of videos on your phone and to assign videos to various phone tasks.
Saved to Phone Folder Options When you are viewing the Saved to Phone folder, press Options (right softkey) to display the following options: Expand to switch to the Expand view mode. Thumbnail to switch to the Thumbnail view mode. Set as to assign the video. Select Ringer or Animation and press Display/Edit to display the currently highlighted video’s details or edit the videos (see page 134).
Sending Pictures/Videos Once you’ve taken a picture, you can use the messaging capabilities of your picture/video enabled phone to instantly share it with family and friends. You can send a picture or video to up to ten people at a time using their email addresses or their mobile phone number (if compatible phone).
Page 146
8. Press (left softkey) when you are finished adding Next recipients. (You may include up to ten recipients per message.) 9. If you wish to include a text message, scroll to Message and press the appropriate softkey. Enter your message using your keypad (or press [right softkey] to select a character Mode...
Sending Pictures From Messaging You can also send picture messages from your phone’s Messaging menu. To send pictures from the Messaging menu: 1. Press to access the main menu. 2. Highlight Messaging and press 3. Highlight Send Message and press 4.
Sending Videos From the In Camcorder Folder To send videos from the In Camcorder folder: 1. Press to access the Picture & Video menu. 2. Highlight My Videos and press 3. Highlight In Camcorder and press 4. Highlight a video you wish to send and press .
Managing Picture/Video Messages Online Using the Online Picture/Video Messaging Web Site Once you have uploaded pictures from your phone to your online picture/video messaging account (see “In Camera Folder Options” on page 125), you can use your personal computer to manage your pictures.
Managing Online Pictures and Videos From Your Phone You can use your phone to manage, edit, or share pictures and videos you have uploaded to the online picture/video messaging web site. To view your online pictures and videos from your phone: 1.
Uploading Pictures and Videos To upload pictures: 1. Press to access the Picture & Video menu. 2. Highlight Online Albums and press 3. Highlight Upload Pics and press . (Thumbnail pictures will display.) 4. Select the picture(s) you wish to upload and press (left Upload softkey).
Downloading Your Online Pictures and Videos From your online picture/video messaging albums display, you can select pictures or videos to download to your phone’s folder. To download pictures from the online picture/video messaging web site: 1. From the online pictures display, select the picture you wish to download and press (right softkey).
Sending Online Picture/Video Messages To send pictures using the online Address Book: 1. From the online picture display, select a picture you wish to send and press (left softkey). (See “Managing Online Send Pictures and Videos From Your Phone” on page 143.) 2.
Accessing Online Picture and Video Options From Your Phone To access your online Picture and Video options from your mobile phone: 1. Select a picture or video from your online picture/video messaging account (see “Managing Online Pictures and Videos From Your Phone” on page 143). 2.
Page 155
To access your online Albums options from your mobile phone: 1. Display the album list in the online picture/video messaging menu (see “Managing Online Pictures and Videos From Your Phone” on page 143). 2. Use your navigation key to select an album (or Uploads folder).
13. Service Features Using Voicemail All unanswered calls to your phone are automatically transferred to voicemail, even if your phone is in use or turned off. Voicemail Notification There are several ways your phone alerts you to new voicemail messages: By displaying a message on the screen.
Clearing the Message Icon 1. Press to access the main menu. 2. Highlight Messaging and press 3. Highlight Voicemail and press 4. Highlight Clear Count and press 5. Highlight Yes and press Editing Your Voicemail Number To edit your voicemail number: 1.
Responding to Call Waiting When you’re on a call, Call Waiting alerts you to incoming calls by sounding beeps. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if it is available and you are in digital mode). To respond to an incoming call while you’re on a call: [right softkey], highlight Flash or Press...
Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. 1. Enter a number you wish to call and press 2.
With Web on your phone, you will be able to browse full-color graphic versions – not just text versions – of your favorite website, making it easier than ever to stay informed while on the go. Check sports scores, trade stocks, and shop all on your phone.
Browsing the Web Creating a Bookmark Bookmarks allow you to store the address of your favorite websites for easy access at a later time. 1. Launch the Web page you want to mark. 2. Press (right softkey) to go to the browser menu. 3.
Page 162
Going to a Specific Website 1. Launch the Web and press (right softkey) to display the browser menu. 2. Highlight Go to URL... and press (left softkey). 3. Highlight Address and press (left softkey). 4. Use your keypad to enter the URL of the website you wish to go to, and press (left softkey).
Downloading through the Wireless Web Your phone allows you to download images (screen savers), ringers, games, etc., from a website. It is also possible to download from certain menus (Contacts list, Ringer Setting, or Display Setting). 1. Press to access the main menu. 2.
Downloaded Data Options Selecting Download Settings This feature is available when you select a Java application. To select the settings for the downloaded data: 1. Press to access the main menu. 2. Highlight Downloads and press 3. Highlight Games or Applications and press 4.
Page 165
Sorting the downloaded data The files downloaded via website are stored in alphabetical order. You can sort the data by name, size, or date. 1. Press to access the main menu. 2. Highlight Downloads and press 3. Highlight each folder that includes the downloaded data you want to sort and press 4.
Erasing the Downloaded Data 1. Press to access the main menu. 2. Highlight Downloads and press 3. Highlight a folder and press 4. Highlight the downloaded data you want to erase and press (right softkey). Options 5. Highlight Erase and press 6.
14. Using your Phone’s Media Player Your Multimedia Channel Options Your new phone offers a variety of accessible audio or video channels, depending on your service plan and multimedia subscriptions. Your subscription options include a comprehensive basic service as well as a full menu of a variety of additional channel options.
Accessing Your Media Player’s Channel Listings It’s easy to access and view the multimedia Channel Listings on your SCP-8300 by Sanyo from the phone’s main menu. To access your media player and Channel Listings: 1. Press from standby mode to display the phone’s main menu.
Playing a Video or Audio Clip To select and play a media clip: 1. Press from standby mode to display the phone’s main menu. 2. Select Media Player to display your Channel Listings. 3. Use your keypad to enter a channel number (or use your navigation key to scroll to a channel and press My Channels: If you have selected a channel that you’ve already signed up for (or if it’s a channel with no monthly fee), you...
Multimedia FAQs 1. How does my phone’s Multimedia Service differ from video messaging? Multimedia Service lets you access high-quality video and audio clips provided by external sources. Video messaging lets you capture, upload and share videos that you personally create with your phone’s built-in camcorder. 2.
Page 171
6. How can I easily access a channel without having to scroll through all the channels in my Channel Listings? Each channel will have a number to the left of it. You can simply press this number to quickly access the clips located within that channel.
15. Safety Guidelines Maintaining Your Phone’s Peak Performance Try not to hold, bend, or twist the phone’s antenna. Don’t use the phone if the antenna is damaged. Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, turn the power off and immediately remove the battery.
Using Your Phone Near Other Electronic Devices Most modern electronic equipment is shielded from radiofrequency (RF) signals. However, RF signals from wireless phones may affect inadequately shielded electronic equipment. RF signals may affect improperly installed or inadequately shielded electronic operating systems and/or entertainment systems in motor vehicles.
Turning Off Your Phone in Dangerous Areas To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. Turn your phone off when you’re in any area that has a potentially explosive atmosphere.
Restricting Children’s Access to Your Phone Your phone is not a toy. Do not allow children to play with it as they could hurt themselves and others, damage the phone or make calls that increase your telephone bill. Protecting Your Battery The guidelines listed below help you get the most out of your battery’s performance.
Disposal of Lithium Ion (Li-Ion) Batteries For safe disposal options of your Li-Ion batteries, please ensure that disposal of this in accordance with law and regulation. Do not dispose of the battery in fire; the cell may explode. Do not open or puncture the battery; the released electrolyte is corrosive and may cause damage to the eyes and skin.
Page 177
NetFront is the trademark or registered trademark of ACCESS Co., Ltd. in Japan and in all other countries. Copyright (c) 1996-2005 ACCESS Co., Ltd. This mobile telephone uses JBlend of Aplix Corporation. JBlend and Aplix are registered trade marks of Aplix Corporation in Japan and similar applications have been filed in other countries.