Table of Contents
Advertisement
To adjust the incline on the canopy:
Slightly loosen fixing screws
again.
Slightly loosen adjusting screws
(SW 7).
Lower or raise the canopy at the
front by hand into the correct posi-
tion.
Using the other hand tighten the ad-
justing screws
Tighten the fixing screws
securely.
b
c
(SW 7) up again.
b
(not when operating the external fan)
If a non-return flap is not present in
the venting system, the
supplied must be fitted into the
exhaust connection in the motor unit.
The flaps must open upwards.
The cooker hood is designed to take
ø 150 mm exhaust ducting.
If 125 mm ø exhaust ducting has to
c
be used the
to be fitted into the exhaust connec-
tion on the motor unit.
(see "Connection for air extraction".
needs
27
Hide quick links:
Advertisement
Table of Contents
