Table of Contents
Advertisement
Server Menu
Feature
System Management
Console Redirection
Processor Retest
EMP Password Switch
EMP ESC Sequence
EMP Hangup Line String
Modem Init String
High Modem Init String
EMP Access Mode
EMP Restricted Mode
Access
EMP Direct
Connect/Modem Mode
EMP Password
Option
Description
Selects System Management submenu.
Selects Console Redirection submenu.
No
Yes causes BIOS to clear historical processor status and
Yes
retest all processors on the next boot.
Disabled
Enable or disable the EMP password.
Enabled
Updated from the FPC firmware.
Updated from the FPC firmware.
Updated from the FPC firmware.
Updated from the FPC firmware.
Preboot Only
Preboot Only—EMP is enabled during power down or
Always Active
POST.
Disabled
Always Active—EMP is always enabled.
Disabled—EMP is disabled.
Disabled
When enabled, power down, front panel NMI, and reset
Enabled
control via EMP are disabled. Restricted mode can be
selected with preboot or always active mode.
Direct Connect
You can connect directly to the port or use a modem.
Modem Mode
If enabled, allows you to restrict EMP access.
Configuring Your System 3-13
Advertisement
Table of Contents
Troubleshooting
