Advertisement
Quick Links
Advertisement
Summary of Contents for GBC ProTrim 45
- Page 1 GBC ProTrim 45 / 63 ©2006. General Binding Corporation. All rights reserved...
-
Page 2: Cutting Specifications
• Specifications • Included parts and tools • Assembly Operation Instructions • Specifications Dimensions Cutting Specifications: Maximum Cut Length: ProTrim 45 = 45” Box: 12.5” x 23.75” x 59” ProTrim 45 ProTrim 63 12.5” x 23.75” x 76.5” Unit: ProTrim 45 43.25”... - Page 3 Included Parts and Tools Item Mid cross member (Distinguishable by rounded edges) Upper cross member (Distinguishable by squared edges) Hardware Pack Legs ( Left & Right) Waste Curtain Trimmer assembly Description ©2006. General Binding Corporation. All rights reserved...
- Page 4 Included Parts and Tools Item Bolts, Qty 4. ( Used to secure the legs to the upper cross member) Bolts, Qty 2, ( Used to secure waste curtain shaft to stand) Bolts, Qty 4. ( Used to secure the mid cross member to the legs) Bolts, Qty 4.
- Page 5 Assembly Begin by finding the two legs and the upper cross member. The legs must be oriented correctly so that the larger holes are on the outside of the unit. The smaller hole must be facing toward the inside of the unit. Lay the upper cross member on the floor, then align one of the legs with the end of the cross...
- Page 6 Assembly Place the stand on its feet. Attach the mid cross member to the stand with the bolts identified as “ “ in the hardware section of this manual. Use the 6mm Hex tool for these bolts. The stand should now be completed.
- Page 7 Assembly Use the bolts identified as “ D “ in the hardware section to secure the trimmer assembly to the top of the stand. Use the 6mm Hex tool for these bolts. Remove the wire ties from the waste curtain, and then install the waste curtain in the rear of the trimmer as shown in the photo.
- Page 8 Assembly Attach the other waste curtain support bar to the stand of the trimmer with the bolts identified as “ B “earlier in this manual. The assembly of the trimmer is now complete. ©2006. General Binding Corporation. All rights reserved...
-
Page 9: Operation
Operation The GBC ProTrim 45 and ProTrim 63 were designed with ease of operation in mind. The steps for proper operation are as follows: 1.) Move the cutter head all the way to the right or left side of the trimmer. (This is required... - Page 10 ©2006. General Binding Corporation. All rights reserved...