Table of Contents
Advertisement
Replacing System Components
Installing a Replacement Drive
IMPORTANT: Be sure that the replacement drive is using the latest firmware before installing
it in the system. Otherwise, the system may not be able to operate at Ultra320 speed.
1. Insert the replacement drive into the bay until the drive is against the backplane
connector.
2. Push the release lever in until it engages the ejector button.
3. Observe the drive status LEDs to confirm that the replacement drive is
functioning correctly.
Blower
WARNING: The blower blades rotate at a high speed and do not stop
immediately when power is disconnected. Allow enough time for the blades to
stop rotating before removing the blower from the power supply unit.
1. Remove the blower from the power supply unit by pressing the two purple
blower tabs (3) while pulling the blower toward you.
2. Align the guidepost (2) on the replacement blower with the hole (1) adjacent to
the DC power outlet.
3-4
HP StorageWorks Modular Smart Array 30 User Guide
- Quick Links:
- System
- Ultra320 I/O Module
Hide quick links:
Advertisement
Table of Contents
