Dell W-AP92 Specifications
Entry level 300 mbps 802.11n access point
Hide thumbs
Also See for W-AP92:
- Supplemental installation instructions (2 pages) ,
- Installation manual (2 pages) ,
- Specifications (2 pages)
Advertisement
Quick Links
Dell Networking W-AP92 &
W-AP93 Access Points
The multifunction Dell Networking W-AP92 and
W-AP93 are entry-level indoor, single-radio 802.11n
access points (APs) designed for low-density
deployments in offices, hospitals, schools and retail
stores. These compact, high-speed APs deliver
wire-like performance at data rates up to 300 Mbps.
The W-AP92 features a single 2x2 multiple input,
multiple output (MIMO) dual-band 2.4-GHz/5-GHz
radio with interface to connect external antennas
while the W-AP93 features the same radio with
integrated internal antennas. Both APs are built to
provide years of trouble-free operation and are
backed by an Extended Lifetime Warranty.
Working with Dell's line of centralized Networking W
Series Controllers, the W-AP92 and W-AP93 deliver
secure, high-speed wireless network services for
user mobility that works seamlessly within enterprise,
branch office and campus network deployments.
802.11n enables the use of wireless as a primary
connection with speed and reliability comparable
to a wired LAN. It also increases performance by
utilizing techniques such as channel bonding,
block acknowledgement and MIMO radios.
Advanced antenna technology also increases range
and reliability.
Key to ensuring wire-like performance and reliability
is the W-Series Adaptive Radio Management (ARM),
which manages the 2.4-GHz and 5-GHz radio
bands to deliver maximum client performance.
Adaptive Radio Management enables different
802.11 a, b,g and n wireless clients to operate on the
same network at maximum possible performance
through the use of band steering, airtime fairness
policies between clients, and by managing channel
interference that may occur between access points.
The multifunction W-AP92 and W-AP93 can be
configured through the controller to provide
wireless LAN (WLAN) access with part-time air
monitoring, dedicated air monitoring for wireless IPS,
Remote AP (RAP) functionality or secure enterprise
mesh. The W-AP92 and W-AP93 each feature a
10/100/1000BASE-T Ethernet interface and can
operate from standard power-over-Ethernet (PoE)
sources or a 12-volt DC power supply.
Entry level 300 Mbps
802.11n access point
for secure wireless
mobility.
Dell_Networking_W_AP92_93 page 1
Advertisement
Related Manuals for Dell W-AP92
Summary of Contents for Dell W-AP92
- Page 1 300 Mbps. wireless LAN (WLAN) access with part-time air The W-AP92 features a single 2x2 multiple input, monitoring, dedicated air monitoring for wireless IPS, multiple output (MIMO) dual-band 2.4-GHz/5-GHz...
-
Page 2: Specifications
- 802.11n high-throughput (HT) support: HT 20/40 - 802.11n packet aggregation: A-MPDU, A-MSDU Antenna • W-AP92: dual, RP-SMA interfaces for external antenna support (Supports up to 2x2 MIMO with spatial diversity. External Antenna selection guide is available from Dell representative or downloadable from Dell.com/wireless) - Page 3 W-AP93 RF Performance Table Max TX power per active Max TX power per active RX Sensitivity (dBm) RX Sensitivity (dBm) TX chain (dBm) TX chain (dBm) 2.4 GHz 5 GHz 802.11b 1Mbps 2Mbps 5.5Mbps 11Mbps 802.11a/g 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps...
- Page 4 The Extended Life Limited Hardware Warranty is not transferrable. For more information see dell.com/warranty. ©2013 Dell Inc, All Rights Reserved. Dell, and the DELL logo are trademarks of Dell Inc. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.